Conversion of Lignocellulosic Bagasse Biomass into Hydrogel

Document Type : Research Paper

Authors

1 Department of Adhesive and Resin, Faculty of Polymer Processing, Iran Polymer and Petrochemical Institute, P.O. Box: 14975-112, Tehran, Iran

2 Department of Science, Tehran University, P.O. Box: 14155-6455, Tehran, Iran

Abstract

In recent years, the main objective of developing new hydrogel systems has been to convert biomass into environmentally-friendly hydrogels. Hybrid hydrogels are usually prepared by graft copolymerization of acrylic monomers onto natural polymers or biomass. In this study, sugarcane bagasse was used to prepare semi-synthetic hybrid hydrogels without delignification, which is a costly and timeconsuming process. Sugarcane bagasse as a source of polysaccharide was modified using polymer microgels based on acrylic monomers such as acrylic acid, acrylamide and 2-acrylamido-2-methyl propane sulfonic acid which were prepared through inverse emulsion polymerization. By this process, biomass as a low-value by-product was converted into a valuable semi-synthetic hydrogel. In the following, the effect of latex type¸ the aqueous-to-organic phase ratio in the polymer latex, time and temperature of modification reaction on the swelling capacity of the hybrid hydrogel were evaluated. The chemical reaction between sugarcane bagasse and acrylic latex was carried out during heating of the modified bagasse which led to obtain a semisynthetic hydrogel with 60% natural components and 40% synthetic components. Among the latexes with different structures, poly(AA-NaAA-AM-AMPS) was the most suitable polymer latex for the conversion of biomass into hydrogel. The bagasse modified with this latex had a water absorption capacity up to 112 g/g, while the water absorption capacity of primary sugarcane bagasse was only equal to 3.6 g/g. The prepared polymer hydrogels were characterized using Fourier transform infrared spectroscopy (FTIR), dynamic-mechanical thermal analysis (DMTA), thermal gravimetric analysis (TGA), scanning electron microscopy (SEM) and determination of the amount of swelling capacity.

Keywords

Iranian Journal of Polymer Science and Technology
Volume 29, Issue 5 - Serial Number 145
January and February 2017
Pages 455-467

Files

Share

How to cite

Statistics