Synergistic Effect of Intumescent Flame Retardant and Organically Modified Montmorillonite on Flame-Retardant and Foaming Properties of High Density Polyethylene/Walnut Shell Powder Biocomposites

Document Type : Research Paper

Authors

1 Department of Chemical Engineering, Isfahan University, P.O. Box: 8174673441, Isfahan, Iran

2 Chemical Engineering Group, Persian Gulf University, Post Code: 7516913817, Boushehr, Iran

3 Department of Chemical Engineering, College of Engineering, Marvdasht Branch, Islamic Azad University, Postal Code: 73711-13119, Marvdasht, Iran

4 Abadan Faculty of Petroleum (Shahid Tondgouyan), Petroleum University of Technology, Abadan, Iran

Abstract

The synergistic effects of organic montmorillonite (OMMT) and ammonium polyphosphate (APP) on flame retardant enhancement of High density polyethylene/walnut shell powder (HDPE/WSP) biocomposite were investigated by using the limiting oxygen index (LOI), thermogravimetric analysis (TGA) and Cone calorimeter test. The LOI data show that OMMT has a synergistic flame retardant effect with APP and the LOI value reaches 28%for the samples containing 9 phr OMMT and 15 phr APP. The TGA and Cone calorimeter data demonstrate that the incorporation of OMMT and APP is very effective in enhancing the thermal stability ofHDPE/WSP/OMMT/APP system. Based on The results of the thermogravimetric analysis all samples decomposed in two decomposition stages. Addition of OMMT and APP alsocatalyzed the first stage of decomposition, and produced morechar residual. The second decomposition stage conductedin higher temperature. These transitionsare due to the OMMTincorporates with APP to produce a charred layer and prevents the heatand mass transfer between surface and melting polymer, lead toimprovethe fire resistance of the composites.Addition of OMMT and APP and consequently production of charred layer also decreased HRR and MLR values.Microcellular HDPE/WSP biocomposite foams were prepared with batch foaming apparatus using nitrogen as blowing agent. In microcellular biocomposites, therelative density and cell size were a strong function of APP and OMMT contentand processing conditions. With increasing of APP content, the relative density decreased and then increased and the cell size increased.Addition of OMMTresulting in smaller cell size and higher relative density. The relative density decreased with increasing of saturation temperature and pressure.

Keywords

References

Pérez E., Famá L., PardoS. G., Abad M.J., and Bernal C., Tensile and Fracture Behaviour of PP/Wood Flour Composites, Compos. Part B: Eng., 43, 2795-2800, 2012.
Pirayesh H., Khanjanzadeh H., and Salari A., Effect of Using Walnut/Almond Shells on the Physical, Mechanical Properties and Formaldehyde Emission of Particleboard, Compos. Part B-Eng., 45, 858-863, 2013.
Pirayesh H., Khazaeian A., and Tabarsa T., The Potential for Using Walnut (Juglans regia L.) Shell as a Raw Material for Wood-Based Particleboard Manufacturing, Compos, Part B: Eng., 43, 3276-3280, 2012.
Klyosov A.A., Wood-Plastic Composites, John Wiley and Sons, NewYork, 75-77, 2007.
Wang J., Ren Q., Zheng W., and Zhai W., Improved Flame-Retardant Properties of Poly(lactic acid) Foams Using Starch as a Natural Charring Agent, Ind. Eng. Chem. Res., 53, 1422-1430, 2014.
Camino G., Costa L., and Martinasso G., Intumescent Fire-Retardant Systems, Polym. Degrad. Stab., 23, 359-376, 1989.
Horacek H. and Grabner R., Advantages of Flame Retardants Based on Nitrogen Compounds, Polym. Degrad. Stab., 54, 205-215, 1996.
Li B. and He J., Investigation of Mechanical Property, Flame Retardancy and Thermal Degradation of LLDPE–Wood-Fibre Composites, Polym. Degrad. Stab., 83, 241-246, 2004.
Bai G., Guo C., and Li L. Synergistic Effect of Intumescent Flame Retardant and Expandable Graphite on Mechanical and Flame-Retardant Properties of Wood Flour-Polypropylene Composites, Constr. Build. Mater., 50, 148-153, 2014.
Camino G., Grassie N., and McNeill I.C., Influence of the Fire Retardant, Ammonium Polyphosphate, on the Thermal Degradation of Poly(methyl methacrylate), J. Polym. Sci. A1, 16, 95-106, 1978.
Li B., Sun C.Y., and Zhang X.C., An Investigation of Flammability of Intumescent Flame Retardant Polyethylene Containing Starch by Using Cone Calorimeter, Chem. J. Chinese U., 20, 146-149, 1999.
Bourbigot S., Le Bras M., Delobel R., Bréant P., and Tremillon J.M., 4A Zeolite Synergistic Agent in New Flame Retardant Intumescent Formulations of Polyethylenic Polymers-Study of the Effect of the Constituent Monomers, Polym. Degrad. Stab., 54, 275-287, 1996.
Li B.  and Xu M., Effect of a Novel Charring-Foaming Agent on Flame Retardancy and Thermal Degradation of Intumescent Flame Retardant Polypropylene, Polym. Degrad. Stab., 91, 1380-1386, 2006.
Lewin M. and Endo M., Catalysis of Intumescent Flame Retardancy of Polypropylene by Metallic Compounds, Polym. Adv. Technol., 14, 3-11, 2003.
Davies P.J., Horrocks A.R., and Alderson A., The Sensitisation of Thermal Decomposition of Ammonium Polyphosphate by Selected Metal Ions and Their Potential for Improved Cotton Fabric Flame Retardancy, Polym. Degrad. Stab., 88, 114-122, 2005.
Chen X., Ding Y., and Tang T., Synergistic Effect of Nickel Formate on the Thermal and Flame‐Retardant Properties of Polypropylene, Polym. Int., 54, 904-908, 2005.
Costache M.C., Heidecker M.J., Manias E., Camino G., Frache A., Beyer G., and Wilkie C.A., The Influence of Carbon Nanotubes, Organically Modified Montmorillonites and Layered Double Hydroxides on the Thermal Degradation and Fire Retardancy of Polyethylene, Ethylene–Vinyl Acetate Copolymer and polystyrene, Polymer, 48, 6532-6545, 2007.
Zammarano M., Bellayer S., Gilman J.W., Franceschi M., Beyer F.L., Harris R.H., and  Meriani S., Delamination of organo-Modified Layered Double Hydroxides in Polyamide 6 by Melt Processing, Polymer, 47, 652-662, 2006.
Costantino U., Gallipoli A., Nocchetti M., Camino G., Bellucci F., and Frache A., New Nanocomposites Constituted of Polyethylene and Organically Modified ZnAl-Hydrotalcites, Polym. Degrad. Stab., 90, 586-590, 2005.
Zhao C.X., Liu Y., Wang D.Y., Wang D.L., and Wang Y.Z., Synergistic Effect of Ammonium Polyphosphate and Layered Double Hydroxide on Flame Retardant Properties of Poly(vinyl alcohol), Polym. Degrad. Stab., 93, 1323-1331, 2008.
Jang B.N. and Wilkie C.A., The thermal Degradation of Polystyrene Nanocomposite, Polymer, 46, 2933-2942, 2005.
Jang B.N. and Wilkie C.A., The Effect of Clay on the Thermal Degradation of Polyamide 6 in Polyamide 6/Clay Nanocomposites, Polymer, 46, 3264-3274, 2005.
Costache M.C., Jiang D.D., and Wilkie C.A., Thermal Degradation of Ethylene–Vinyl Acetate Coplymer Nanocomposites, Polymer, 46, 6947-6958, 2005.
Morgan A.B., Flame Retarded Polymer Layered Silicate Nanocomposites: A Review of Commercial and Open Literature Systems, Polym. Adv. Technol., 17, 206-217, 2006.
Beyer G., Filler Blend of Carbon Nanotubes and Organoclays with Improved Char as a New Flame Retardant System for Polymers and Cable Applications, Fire Mater., 29, 61-69, 2005.
Moniruzzaman M. and Winey K.I., Polymer Nanocomposites Containing Carbon Nanotubes, Macromolecules, 39, 5194-5205, 2006.
Kashiwagi T., Du F., Winey K.I., Groth K.M., Shields J.R., Bellayer S.P., and Douglas J.F., Flammability Properties of Polymer Nanocomposites with Single-Walled Carbon Nanotubes: Effects of Nanotube Dispersion and Concentration, Polymer, 46, 471-481, 2005.
Xia Y., Jian X.G., Li J.F., Wang X.H., and Xu Y.Y., Synergistic Effect of Montmorillonite and Intumescent Flame Retardant on Flame Retardance Enhancement of ABS, Polym. Plast. Technol. Eng., 46, 227-232, 2007.
Chen X.S., Yu Z.Z., Liu W., and Zhang S., Synergistic Effect of Decabromodiphenyl Ethane and Montmorillonite on Flame Retardancy of Polypropylene, Polym. Degrad. Stab., 94, 1520-1525, 2009.
Fathizadeh M.A. and Beheshty M.H., A Comparative Study on the Thermal Resistance, Flammability and Mechanical Properties of Unsaturated Polyester and Epoxy Resins, Iran. J. Polym. Sci. Technol. (Persian), 28, 409-419, 2016.
Yu C., Wang Y., Wu B., Xie Y., Yu C., Chen S., and Li W., Evaluating the Foamability of Polypropylene with Nitrogen as the Blowing Agent, Polym. Test., 30, 887-892, 2011.
Statheropoulos M. and Kyriakou S.A., Quantitative Thermogravimetric-Mass Spectrometric Analysis for Monitoring the Effects of Fire Retardants on Cellulose Pyrolysis, Anal. Chim. Acta, 409, 203-214, 2000.
Meng X.Y., Ye L., Zhang X.G., Tang P.M., Tang J.H., Ji X., and Li Z.M., Effects of Expandable Graphite and Ammonium Polyphosphate on the Flame‐Retardant and Mechanical Properties of Rigid Polyurethane Foams, J. Appl. Polym. Sci., 114, 853-863, 2009.
Schartel B., Braun U., Schwarz U., and Reinemann S., Fire Retardancy of Polypropylene/Flax Blends, Polymer, 44, 6241-6250, 2003.
Bras M.L., Bugajny M., Lefebvre J.M., and Bourbigot S., Use of Polyurethanes as Char‐Forming Agents in Polypropylene Intumescent Formulations, Polym. Int., 49, 1115-1124, 2000.
Sato Y., Fujiwara K., Takikawa T., Takishima S., and Masuoka H., Solubilities and Diffusion Coefficients of Carbon Dioxide and Nitrogen in Polypropylene, High-density Polyethylene, and Polystyrene Under High Pressures and Temperatures, Fluid Phase Equilib., 162, 261-276, 1999.
Xu Z.M., Jiang X.L., Liu T., Hu G.H., Zhao L., Zhu Z.N., and Yuan W.K., Foaming of Polypropylene with Supercritical Carbon Dioxide, J. Supercrit. Fluids, 41, 299-310, 2007.
Goel S.K. and Beckman E.J., Generation of Microcellular Polymeric Foams Using Supercritical Carbon Dioxide. I: Effect of Pressure and Temperature on Nucleation, Polym. Eng. Sci., 34, 1137-1147, 1994.
Arora K.A., Lesser A.J.,  and McCarthy T.J., Preparation and Characterization of Microcellular Polystyrene Foams Processed in Supercritical Carbon Dioxide, Macromolecules, 31, 4614-4620, 1998.
Iranian Journal of Polymer Science and Technology
Volume 30, Issue 4 - Serial Number 150
November and December 2017
Pages 299-310

Files

Share

How to cite

Statistics