Synthesis and Characterization of Copolymer Poly(propylene-co-styrene) Grafted-Multiple-walled Carbon Nanotubes by Nitroxide-mediated Living Radical Polymerization and Solution Intercalation Method

Document Type : Research Paper

Authors

1 Nano Drug Delivery Research Center, Health Technology Institute, Kermanshah University of Medical Sciences, P.O. Box 1673-67145, Kermanshah, Iran

2 Department of Chemistry, Faculty of Science, Payame Noor University, P.O. Box 19395-3697, Tehran, Iran

Abstract

Hypothesis: Chemical modification of commercial and industrial copolymers and polymers such as polypropylene (PP) is one of the challenges of polymer chemistry. In this research work, a polypropylene nanocomposite modified with polystyrene (PSt) and carbon nanotube was synthesized by new methods, including living free radical polymerization (LFRP).
Methods: Maleic anhydride was grafted onto polypropylene (PP) followed by opening of the anhydride ring with ethanolamine to produce hydroxylated polypropylene (PP-OH). Hydroxyl groups were esterified using α-phenyl chloroacetyl chloride to obtain PP-Cl. Then 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) was immobilized onto the PP backbone using a nucleophilic substitution reaction to produce PP-TEMPO macroinitiator. Afterward, the monomer (St) was grafted onto the backbone (PP) through “grafting onto” technique to afford (PP-TEMPO)-g-PSt. The chloride-end-caped PP-g-PSt copolymer was then attached to the oxidized MWCNTs in the presence of DMF as solvent to produce the MWCNTs-g-(PP-g-PSt) nanocomposite by solution intercalation method. Also, the present study confirmed that PP-g-MA was efficient to promote the dispersion of MWCNTs in the PP matrix, which solved the problem of CNTs aggregation and limited compatibility between nanotubes and polymer matrices. In another study nanotubes-polypropylene nanocomposities were prepared through esterification process.
Findings: The chemical structures of all samples were identified using Fourier transform infrared spectroscopy. Chemical bonding (PP-TEMPO)-g-PSt to MWCNTs was confirmed by thermogravimetric analysis and differential scanning calorimetry results. In addition, morphology studies were investigated using TEM and SEM images. A synthesized MWCNTs-g-(PP-g-PSt) nanocomposite can be used as a reinforcement for polymer (nano-) composites due to the superior features of MWCNTs as well as their compatibility with polymer materials after functionalization processes.

Keywords


  1. Iijima S., Helical Microtubules of Graphitic Carbon, Nature, 354, 56-58, 1991.
  2. Cocca M., Avolio R., Gentile G., Pace E. D., Errico M. E., and Avella M., Amorphized Cellulose as Filler in Biocomposites Based on Poly(e-caprolactone), Carbohydr. Polym. 118,170-182,2015.
  3. Oueiny C., Berlioz S., and Perrin F.X., Electrically Conductive Polymers and Polymer Composites, Prog. Polym. Sci, 39, 707-748, 2014.
  4. Blackburn J.L., Ferguson A.J., Cho C., and Grunlan J.C., Carbon-Nanotube-Based Thermoelectric Materials and Devices, Adv. Mater, 30, 1704386, 2018.
  5. Li J.C., Hou P.X., and Liu C., Heteroatom-Doped Carbon Nanotube and Graphene-Based Electrocatalysts for Oxygen Reduction Reaction, Small, 13, 1702002, 2017.
  6. Biju V., Chemical Modifications and Bioconjugate Reactions of Anomaterials for Sensing, Imaging, Drug Delivery and Therapy, Chem. Soc. Rev., 43, 744-764, 2014.
  7. Arrocha-Arcos A.A. and Miranda-Hernández M., Multiwalled Carbon Nanotubes anode with Low Oxygen Content for Ascorbic Acid Fuel Cells Design, Int. J. Hydrog.Energy 43, 7372-7380 2018.
  8. Zhang G., Jiang S., Yao W., and Liu C, Enhancement of atural Convection by Carbon Nanotube Films Covered Microchannel-Surface for Passive Electronic Cooling Devices, ACS Appl. Mater. Interfaces, 45, 31202-31211, 2016.
  9. Balogun M.S., Luo Y., Qiu W., Liu P., and Tong Y., A Review of Carbon Materials and Their Composites with Alloy Metals for Sodium Ion Battery Anodes, Carbon, 98, 162-178 , 2016.
  10. Wang S., Liang R., Wang B., and Zhang C., Load-transfer in Functionalized Carbon Nanotubes/Polymer Composites, Chem. Phys. Lett., 457, 371-375, 2008.
  11. Thostenson E.T. and Chou T.W., On the Elastic Properties of Carbon Nanotube-based Composites: Modelling and Characterization, J. Phys. D: Appl. Phys., 36, 573-576, 2003.
  12. Wang S., Liang R., Wang B., and Zhang C., Dispersion and Thermal Conductivity of Carbon Nanotube Composites, Carbon, 47, 53-57, 2009.
  13. Zhu L. and Narh K.A., Numerical Simulation of the Effect of Nanotube Orientation on Tensile Modulus of Carbon-Nanotube-Reinforced Polymer Composites, Polym. Int., 53, 1461-1466, 2004.
  14. Xiong J., Zheng Z., Qiu X., Li M., Li H., and Wang X., The Thermal and Mechanical Properties of a Polyurethane/Multi-walled Carbon Nanotube Composite, Carbon, 44, 2701-2707, 2006.
  15. Ata M.S., Poon R., Syed A.M., Milne J., and Zhitomirsky I., New developments in Non-covalent Surface Modification, Dispersion and Electrophoretic Deposition of Carbon Nanotubes., Carbon, 130, 584-598, 2018.
  16. Selhorst R.C., Puodziukynaite E., Dewey J.A., Wang P., and Barnes M.D., Ramasubramaniam A., and Emrick T., Chem. Sci. 7, 4698-4705, 2016.
  17. Bensghaïer A., Truong S.L., Seydou M., Lamouri A., Leroy E., Mičušik M., Forro K., Beji M., Pinson J., Omastová M., and Chehimi M.M, Efficient Covalent Modification of Multiwalled Carbon Nanotubes with Diazotized Dyes in Water at Room Temperature., Langmuir, 33, 6677-6690, 2017.
  18. Ren F., Yu H., and Wang L., Current Progress on the Modification of Carbon Nanotubes and Their Application in Eectromagnetic Wave Absorption, RSC Adv., 4, 14419-14431, 2014
  19. Massoumi B., Ramezami M., Jaymand M., and Ahmadinejad M., Multi-walled Carbon Nanotubes-g-[Poly(ethylene glycol)-b-Poly(ε-caprolactone)]: Synthesis, Characterization, and Properties, J. Polym. Res., 22, 214-221, 2015
  20. Massoumi B., Jaymand M., Samadi R., and Entezami A.A., In Situ Chemical Oxidative Graft Polymerization of Thiophene Derivatives from Multi-walled Carbon Nanotubes, J. Polym. Res., 21, 442-449, 2014.
  21. Kim J.H., Lee Y., Shama A., and Liu C., Polypyrrole/Carbon Composite Electrode for High Power Electrochemical Capacitors, Electochim. Acta, 52, 1727-1732, 2006.
  22. www. Wikipedia.org.
  23. Ahmadian-Alam L., Haddadi-Asl V., Roghani-Mamaqani H., Hatami L., and Salami-Kalajahi M., Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay, Iran. J. Polym. Sci. Technol. (In Persian), 24, 101-112, 2011.
  24. Matyjaszewski K., Controlled Radical Polymerization, American Chemical Society, Washington, DC, 31, 6836–6840, 1998.
  25. Cocca M., Avolio R., Gentile G., Pace E.D., Errico M.E., and Avella M., Amorphized Cellulose as Filler in Biocomposites Based on Poly(ε-caprolactone), Carbohydr. Polym. 118,170-182,2015.
  26. Steenbock M., Klapper M., Muellen K., Bauer C., and Hubrich M., Decomposition of Stable Free Radicals as Self-Regulation in Controlled Radical Polymerization, Macromolesules, 31, 5223-5228, 1998
  27. Abbasian M., Pakzad M., Ramazani A., and Nazari K., Cellulose Modification through Grafting of Polyacrylonitrile by Atom Transfer Radical Polymerization, Iran. J. Polym. Sci. Technol. (Persian), 28, 323-332, 2015.
  28. Abbasian M., Massomi B., Rashidzadeh B., and Bahrami H., Versatile Method for Synthesis of Electrically Conductive Polypyrrole-Polystyrene Clay Nanocomposites Using ATRP and Chemical Polymerisation Methods, J. Exp. Nanosci., 10, 844-858, 2015.
  29. Abbasian M., Pakzad M., and Nazari K., Synthesis of Cellulose-graft-Poly Chloromethyl Styrene-graft-Polyacrylonitrile Terpolymer/Organoclay Bionanocomposite by Metal Catalyzed Living Radical Polymerization and Solvent Blending Method, Polym. Plas. Technol. Eng., 18, 1525-6111, 2016.
  30. Abbasian M. and Amirkhani L., Synthesis of conductive PSt-g-PANi/TiO2 Nanocomposites by Metal Catalyzed and Chemical Oxidative Polymerization, Des. Monomers Polym., 19, 585-595, 2016
  31. Abbasian M. and Mahi R., In-Situ Synthesis of Polymer–Silica Nanocomposites by Living Radical Polymerisation Using TEMPO Initiator, J. Exp. Nanosci., 9, 785-798, 2014.
  32. Abbasian M., Pakzad M., and Amirmanesh M., Polymericaly Modified Clays to Preparation of Polystyrene Nanocomposite by Nitroxide Mediated Radical Polymerization and Solution Blending Methods, Polym. Compos., 38, 1124-1134, 2017.
  33. Karaj-Abad S.G., Abbasian M., and Jaymand M., Grafting of Poly[(methyl methacrylate)-block-styrene] onto Cellulose via Nitroxide-Mediated Polymerization, and Its Polymer/Clay Nanocomposite, Carbohydr. Polym., 152, 297-305, 2016.
  34. Abbasian M. and Khakpour N.A., Nitroxide-Mediated Radical Polymerization of Styrene Initiated from the Surface of Titanium Oxide Nanoparticles, J. Nanostruct., 6, 35-42, 2016.
  35. Abbasian M., Masoumi B., Masoudi A., and Rashidzadeh B., Synthesis and Characterization of Polychloromethylstyrene TiO2-nanocomposite Through a Simple Method via Reversible Addition-Fragmentation Transfer Polymerization, Polym. Plast. Technol. Eng., 53, 1150-1159, 2014.
  36. Abbasian M. and Mahmoodzadeh F., Synthesis of Chitosan-graft-Poly(acrylic acid) Using 4-yano-4-[(Phenylcarbothioyl) Sulfanyl] Pentanoic Acid to Serve as RAFT Agent, J. Polym. Mater., 32, 527, 2015.
  37. Abbasian M. and Mahmoodzadeh F., Synthesis of Antibacterial Silver–Chitosan-Modified Bionanocomposites by RAFT Polymerization and Chemical Reduction Methods, J. Elast. Plast., 49, 173-193, 2016.
  38. Abbasian M., Masoumi B., and Rashidzadeh B., Versatile Method via Reversible Addition-Fragmentation Transfer Polymerization for Synthesis of Polystyrene/ZnO–Nanocomposite, Polym. Eng. Sci., 56, 187-195, 2016.
  39. Kato M., Kamigato M., Sawamato M., and Higashimura T., Polymerization ofMethyl Methacrylate with the Carbon Tetrachloride/Dichlorotris-(triphenyl phosphine) ruthenium (II)/MethylAluminum Bis(2,6-di-tert-buthylphenoxide) Initiating System, Macromolecules, 28, 1721-1723, 1995.
  40. Wang J. and Matyjaszewski K., Controlled/Living Radical Polymerization. Atom Transfer Radical Polymerization in the Presence of Trasiton-Metal, Adv. Mater., 21, 1043-1048, 1995.
  41. Patten T.E. and Matyjaszewski K., Atom-Transfer Radical Polymerization and the Synthesis of Polymeric Materials; Adv, Mater., 10, 895-903, 1998.
  42. Matyjaszewski K., Proceedings of a Symposium on Controlled Radical Polymerization, ACS Symp., 768, 2-3, 2000.
  43. Sugihara S., Radzi A.H., Hori S., and Ikeda. I., Controlled Radical Polymerization of Methyl Methacrylate in the Presence of 2-Boromoetanol, Polym. Bull., 8, 873-879, 2007.
  44. Abbasian M., Ghaeminia H., and Jaymand M., A Facile and Efficient Strategy for the Functionalization of Multiple-walled Carbon Nanotubes Using Well-defined Polypropylene-grafted Polystyrene, Appl. Phys. A, 522, 2-9, 2018.
  45. Abbasian M., Shahparian M., and Bonab S.E.S., Chemical Modification of Polypropylene by Nitroxide-mediated Radical Graft Polymerization of styrene, Iran. Polym. J., 22, 209-218. 2013.
  46. Abbasian M., Graft Copolymerization of Styrene onto PVC Poly(vinyl chloride) and Syndiotactic Polystyrene by Living Radical Polymerization, PhD Thesis, Tabriz University, July 2007.
  47. Abbasian M., Synthesis of Functional Syndiotactic Polystyrene Copolymers with Graft and Block Structures by Nitroxide-Mediated Living Radical Polymerization, J. Elast. Plast., 43, 481-497, 2011.
  48. Lee S.H., Cho E.N.R., Jeon S.H., and Youn J.R., Rheological and Electrical Properties of Polypropylene Composites Containing Functionalized Multi-walled Carbon Nanotubes and Compatibilizers, Carbon, 45, 2810-2822, 2007.
  49. De Falco A., Fascio M.L., Lamanna M.E., and Corcuera M.A, Thermal Treatment of the Carbon Nanotubes with Polystyrene under Atom Transfer Radical Polymerization Conditions, Carbon, 45, 152-159, 2007.
  50. Liu J., Dong J.Y., Cui N., and Hu Y., Supporting a Metallocene on Functional Polypropylene Granules for Slurry Ethylene Polymerization, Macromolecules, 37, 6275-6282, 2004.
  51. Park E.S., Jin H.J., Lee I.M., Kim M., and Lee H., Grafting of Polystyrene Branches to Polyethylene and Polypropylene, J. Appl. Polym. Sci., 83, 1103-1111, 2002.
  1. Kong H., Gao C.H., and Yan D., Functionalization of Multi-walled Carbon Nanotubes by Atom Transfer Radical Polymerization and Defunctionalization of the Products, Macromolecules, 37, 4022-4030, 2004.