اثرهای اصلاح سطحی گرافن بر رفتار مکانیکی کامپوزیت‌های اپوکسی-الیاف بازالت

1.Novoselov K.S., Geim A.K., Morozov S.V., Jiang D., Zhang Y., and Dubonos S.V., Electric Field Effect in Atomically Thin Carbon Films, Science, 306, 666-669, 2004.
2.Huang X., Qi X., Boey F., and Zhang H., Graphene-Based Composites, Chem. Soc. Rev., 41, 666-686, 2012.
3.Potts J.R., Dreyer D.R., Bielawski C.W., and Ruoff R.S., Graphene-Based Polymer Nanocomposites, Polymer, 52, 5-25, 2011.
4.Fan H., Wang L., Zhao K., Li N., Shi Z., and Ge Z., Fabrication, Mechanical Properties, and Biocompatibility of Graphene-Reinforced Chitosan Composites, Biomacromolecules, 11, 2345-2351, 2010.
5.Wang D.W., Li F., Zhao J., Ren W., Chen Z.G., and Tan J., Fabrication of Graphene/ Polyaniline Composite Paper via In-Situ Anodic Electropolymerization for High-Performance Flexible Electrode, ACS Nano, 3, 1745-1752, 2009.
6.Zhu Y., Bakis C.E., and Adair J.H., Effects of Carbon Nanofiller Functionalization and Distribution on Interlaminar Fracture Toughness of Multi-Scale Reinforced Polymer Composites, Carbon, 50, 1316-1331, 2012.
7.Ma P.C., Siddiqui NA., Marom G., and Kim J.K., Dispersion and Functionalization of Carbon Nanotubes for Polymer-Based Nanocomposites: A Review, Composites Part A, 41, 1345-1367, 2010.
8.Wang Z., Colorad H.A., Guo Z.H., Kim H., Park C.L., and Hahn H.T., Effective Functionalization of Carbon Nanotubes for Bisphenol F Epoxy Matrix Composites, Mater. Res., 15, 510-516, 2012.
9.Montazeri A., The Effect of Functionalization on the Viscoelastic Behavior of Multi-Wall Carbon Nanotube/ Epoxy Composites, Mater. Des., 45, 510-517, 2013.
10.Cui L.J., Wang Y.B., Xiu W.J., Wang W.Y., Xu L.H., and Xu X.B., Effect of Functionalization of Multi-Walled Carbon Nanotube on the Curing Behavior and Mechanical Property of Multi-Walled Carbon Nanotube/ Epoxy Composites, Mater. Des., 49, 279-284, 2013.
11.Fiore V., Di Bella G., Valenza A., Glass–Basalt/ Epoxy Hybrid Composites for Marine Applications, Mater. Des., 32, 2091-2099, 2011.
12.Deák T. and Czigány T., Chemical Composition and Mechanical Properties of Basalt and Glass Fibers: A Comparison, Text. Res. J., 79, 645-651, 2009.
13.Wei B., Cao H., and Song S., Environmental Resistance and Mechanical Performance of Basalt and Glass Fibers, Mater. Sci. Eng., A, 527, 4708-4715, 2010.
14.Berozashvili M., Continuous Reinforcing Fibers are Being Offered for Construction, Civil Engineering and other Composites Applications, Adv Mater Com News, 6, 5-6, 2001.
15.Czigány T., Special Manufacturing and Characteristics of Basalt Fiber Reinforced Hybrid Polypropylene Composites: Mechanical Properties and Acoustic Emission Study, Compos. Sci. Technol., 66, 3210-3220, 2006.
16.Hao L. and Yu W., Evaluation of Thermal Protective Performance of Basalt Fiber Nonwoven Fabrics, J. Therm. Anal. Calorim., 100, 551-555, 2010.
17.Dehkordi M.T., Nosraty H., Shokrieh M.M., Minak G., and Ghelli D., The Influence of Hybridization on Impact Damage Behavior and Residual Compression Strength of Intraply Basalt/ Nylon Hybrid Composites, Mater. Des., 43, 283-290, 2013.
18.Liu Q., Shaw MT., Parnas R.S., and McDonnell A.M., Investigation of Basalt Fiber Composite Mechanical Properties for Applications in Transportation, Polym. Compos., 27, 41-48, 2006.
19.Eslami Farsani R., Khalili S., and Najafi M., Effect of Thermal Shock Cycling on the Tensile Behavior of Phenolic based Composites Reinforced with Basalt and Carbon Fibers., AJME, 44, 1-9, 2013.
20.Rafiee M.A., Rafiee J., Srivastava I., Wang Z., Song H., and Yu Z.Z., Fracture and Fatigue in Graphene Nanocomposites, Small, 6, 179-183, 2010.
21.Kamar N.T., Hossain M.M., Khomenko A., Haq M., Drzal L.T., and Loos A., Interlaminar Reinforcement of Glass Fiber/ Epoxy Composites with Graphene Nanoplatelets, Composites Part A, 70, 82-92, 2015.
22.Razavi B., Ramezanian N., and Ahmadjo S., Effect of Polysulfone and Graphene Nanosheets on the Flexibility of Epoxy Coatings, Iran. J. Polym. Sci. Technol. (Persian), 30, 105-114, 2017.
23.Bulut M., Mechanical Characterization of Basalt/ Epoxy Composite Laminates Containing Graphene Nanopellets, Composites Part B, 122, 71-78, 2017.
24.Chen C., Gu Y., Wang S., Zhang Z., Li M., and Zhang Z., Fabrication and Characterization of Structural/ Dielectric Three-Phase Composite: Continuous Basalt Fiber Reinforced Epoxy Resin Modified with Graphene Nanoplates, Composites Part A, 94, 199-208, 2017.
25.Ahmadi-Moghadam B., Sharafimasooleh M., Shadlou S., and Taheri F., Effect of Functionalization of Graphene Nanoplatelets on the Mechanical Response of Graphene/ Epoxy Composites., Mater. Des., 66, 142-149, 2015.
26.Arkles B., Silane Coupling Agents: Connecting Across Boundaries., Morrisville: Gelest., 2003, 9-12, 2003.
27.Khosravi H., Eslami-Farsani R., and Ebrahimnezhad-Khaljiri H., An Experimental Study on Mechanical Properties of Epoxy/Basalt/ Carbon Nanotube Composites under Tensile and Flexural Loadings, jstc, 3, 187-194, 2016. ()in Persian)(
28.Shen M.Y., Chang T.Y., Hsieh T.H., Li Y.L., Chiang C.L., Yang H., and Yip M.C., Mechanical Properties and Tensile Fatigue of Graphene Nanoplatelets Reinforced Polymer Nanocomposites, J. Nanomater., 2013, 1-10, 2013.
29.Ammar A., Al-Enizi A.M., AlMaadeed M.A., and Karim A., Influence of Graphene Oxide on Mechanical, Morphological, Barrier, and Electrical Properties of Polymer Membranes, Arabian J. Chem., 9, 274-286, 2016.
30.Fiedler B., Gojny F.H., Wichmann M.H., Nolte M.C., and Schulte K., Fundamental Aspects of Nano-Reinforced Composites, Compos. Sci. Technol., 66, 3115-3125, 2006.
31.Wichmann M., Cascione M., Fiedler B., Quaresimin M., and Schulte K., Influence of Surface Treatment on Mechanical Behaviour of Fumed Silica/ Epoxy Resin Nanocomposites, Compos. Interfaces, 13, 699-715, 2006.
32.Davim J.P., and Reis P., Study of Delamination in Drilling Carbon Fiber Reinforced Plastics ()CFRP)( Using Design Experiments, Compos. Struct., 59, 481-487, 2003.
33.Choi N., Kinloch A., and Williams J., Delamination Fracture of Multidirectional Carbon-Fiber/ Epoxy Composites Under Mode I, Mode II and Mixed-Mode I/II Loading, J. Compos. Mater., 33, 73-100, 1999.
34.Chatterjee S., Nafezarefi F., Tai N., Schlagenhauf L., Nüesch F., and Chu B., Size and Synergy Effects of Nanofiller Hybrids Including Graphene Nanoplatelets and Carbon Nanotubes in Mechanical Properties of Epoxy Composites, Carbon, 50, 5380-5386, 2012.
35.Rafiee M.A., Rafiee J., Wang Z., Song H., Yu Z.Z., and Koratkar N., Enhanced Mechanical Properties of Nanocomposites at Low Graphene Content, ACS Nano, 3, 3884-3890, 2009.
36.Mannov E., Schmutzler H., Chandrasekaran S., Viets C., Buschhorn S., and Tölle F., Improvement of Compressive Strength After Impact in Fibre Reinforced Polymer Composites by Matrix Modification with Thermally Reduced Graphene Oxide, Compos. Sci. Technol., 87, 36-41, 2013.
37.Yavari F., Rafiee M., Rafiee J., Yu Z.Z., and Koratkar N., Dramatic Increase in Fatigue Life in Hierarchical Graphene Composites, ACS Appl. Mater. Interfaces, 2, 2738-2743, 2010.
38.Rafiee M., Rafiee J., Yu Z.Z., and Koratkar N., Buckling Resistant Graphene Nanocomposites, Appl. Phys. Lett., 95, 223-233, 2009.
39.Jana S. and Zhong W.H., Graphite Particles with a “Puffed” Structure and Enhancement in Mechanical Performance of Their Epoxy Composites, Mater. Sci. Eng., A, 525, 138-146, 2009.
40.Chandrasekaran S., Sato N., Tölle F., Mülhaupt R., Fiedler B., and Schulte K., Fracture Toughness and Failure Mechanism of Graphene Based Epoxy Composites, Compos. Sci. Technol., 97,90-99, 2014.
41.Chandrasekaran S., Seidel C., and Schulte K., Preparation and Characterization of Graphite Nano-Platelet ()GNP)(/ Epoxy Nano-Composite: Mechanical, Electrical and Thermal Properties, Eur. Polym. J., 49, 3878-3888, 2013.
42.Bortz D.R., Heras E.G., and Martin-Gullon I., Impressive Fatigue Life and Fracture Toughness Improvements in Graphene Oxide/ Epoxy Composites, Macromolecules, 45, 238-245, 2011.
43.Zaman I., Phan T.T., Kuan H.C., Meng Q., La L.T.B., and Luong L., Epoxy/ Graphene Platelets Nanocomposites with Two Levels of Interface Strength, Polymer, 52, 1603-1611, 2011.
44.Tang L.C., Wan Y.J., Yan D., Pei Y.B., Zhao L., and Li Y.B., The Effect of Graphene Dispersion on the Mechanical Properties of Graphene/ Epoxy Composites, Carbon, 60, 16-27, 2013.
45.Siddiqui N.A., Sham M.L., Tang B.Z., Munir A., and Kim J.K., Tensile Strength of Glass Fibres with Carbon Nanotube–Epoxy Nanocomposite Coating, Composites Part A, 40, 1606-1614, 2009.
46.Arakawa K., Takahashi K., Relationships Between Fracture Parameters and Fracture Surface Roughness of Brittle Polymers, Int. J. Fract., 48, 103-114, 1991.
47.Liu T., Tjiu W.C., Tong Y., He C., Goh S.S., and Chung T.S., Morphology and Fracture Behavior of Intercalated Epoxy/ Clay Nanocomposites, J. Appl. Polym. Sci., 94, 1236-1244, 2004.
48.Wang K., Chen L., Wu J., Toh M.L., He C., and Yee A.F., Epoxy Nanocomposites with Highly Exfoliated Clay: Mechanical Properties and Fracture Mechanisms, Macromolecules, 38, 788-800, 2005.
49.Zunjarrao S., Sriraman R., and Singh R., Effect of Processing Parameters and Clay Volume Fraction on the Mechanical Properties of Epoxy-Clay Nanocomposites, J. Mater. Sci., 41, 2219-2228, 2006.