خواص آسفالت پلیمری حاصل از اختلاط پس مانده تقطیر در خلاء و ضایعات واحد تولید پلی اتیلن و لاستیک استیرن ـ بوتادی ان


عنوان مقاله [English]

The Properties of Polymer-Modified Asphalt Drived from Vacuum Bottom and Wastes of PE and SBR Plants

نویسندگان [English]

  • A. Yousefi
  • A. A. Yousefi
  • M. Arjomand
چکیده [English]

The polymeric and non-polymeric petrochemical wastes are environmentally unfavorable materials. We have to found a way to reuse these wastes in a safe manner. In styrene-butadiene rubber (SBR) production plant two major wastes are produced one is a fine rubber powder and the other is recycled N-methyl pyrrolidone (NMP). In high-density polyethylene (HDPE) production plant also a low molecular weight polymer waste is produced which does not degrade in environment easily. On the other hand, bitumen is usually blended with thermoplastics, rubbers and an oil to produce polymermodified bitumens. Effect of SBR, PE and NMP wastes on vacuum bottom residue of crude oil distillation was investigated. The results of penetration, softening point and Frass tests revealed the advantages of SBR and PE wastes at high temperatures and suggest NMP waste as a good bitumen extender. The results of the Marshal test on the prepared polymer-modified hot-mix asphalt of the optimum formulation highlight the superiority of its strength and its lower flow as compared with those of standard 60/70 penetration grade bitumen.

کلیدواژه‌ها [English]

  • polymer-modified asphalt
  • vacuum bottom residue
  • waste materials
  • polyethylene
  • SBR