A
-
A Mossavi Movahedi, A.
Activation Changes of Interaction between Aspergillus Niger Enzyme and Sodium N-Dodecyl Sulphate [Volume 4, Issue 2, 1991]
-
A., A.
Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Polypyrrole Polypyrrole [Volume 10, Issue 2, 1997]
-
A., M.
Jute Reinforced Polyester Structures [Volume 2, Issue 2, 1989]
-
A., M.
Fourier Transform Infrared Spectroscopy and Application of Infrared Microscope in Polymer Science and Industries [Volume 5, Issue 3, 1992]
-
A., M.
Kinetic Study of the Auto-oxidation of Polyurethane [Volume 12, Issue 2, 1999]
-
A., M.
The Effect of a- Cellulose Fiber on the Properties of Melamine-Formaldehyde Molding Compounds [Volume 14, Issue 1, 2001]
-
A., M.
The Effect of Glass Fiber on the Properties of Melamine-Formaldehyde Moulding Compounds [Volume 14, Issue 4, 2001]
-
A., M.
Study of the Effect of Acetic Acid and Polyethylene Glycol on Morphology and Performance of Polyvinyl Alcohol Membrane [Volume 16, Issue 1, 2003]
-
A., S.
X-Rays, its Theory and Application in Polymers [Volume 2, Issue 3, 1989]
-
A., S.
Etch-Resist Paints for Printed Circuit Boards [Volume 5, Issue 4, 1992]
-
A. Babalou, A.
Effect of Poly(methacrylic acid) Polyelectrolytes on Stability of Alumina Suspension Systems [Volume 15, Issue 2, 2002]
-
A. Entezami, A.
Determination of the Chemical Reactivity Ratios of Acrylamide and 2- Vinyl Pyridine in Copolymerization Reaction [Volume 3, Issue 1, 1990]
-
A. Entezami, A.
The Applications of Electrically Conducting Polymers [Volume 4, Issue 2, 1991]
-
A. Entezami, A.
Doping of Electrically Conducting Polymers [Volume 5, Issue 3, 1992]
-
A. Entezami, A.
Structural Investigation of Macromolecules Using NMR Spectroscopy in Solution [Volume 8, Issue 3, 1995]
-
A. Entezami, A.
Preparation of Conductive Polyaniline/Silica Composite [Volume 9, Issue 1, 1996]
-
A. Entezami, A.
Photorefraction in Polymers [Volume 9, Issue 1, 1996]
-
A. Entezami, A.
Living Radical Polymerization [Volume 10, Issue 1, 1997]
-
A. Entezami, A.
Ring-opening Bulk-melt Polymerization of Poly(L-lactide) [Volume 16, Issue 4, 2003]
-
A. Hajarizadeh, H.
Utilization of Naphtha in Comparison with Hydrocarbons in Petrochemical Industries [Volume 4, Issue 2, 1991]
-
A. Hashemi, S.
The Effect of a Silane Coupling Agent on Dielectric Properties of Epoxy/Highly Pure Silica Composite [Volume 9, Issue 1, 1996]
-
A. Khonakdar, H.
Investigation on a Rheological Model for Miscible Polymer Blends and Its Evaluation with Experimental Data [Volume 14, Issue 6, 2002]
-
A. Nanvaiee, A.
Surface Protection by Rubber Lining [Volume 8, Issue 3, 1995]
-
A. Semsarzadeh, M.
Study of Mass Transfer Phenomena in Rubber Sheets by Using Aromatic Solvents of Dichlorobenzene, Toluene and Benzene [Volume 15, Issue 1, 2002]
-
A. Shojaosadati, S.
Quality Evaluation of Chitin and Chitosan Extracted from Cyst Shell of the Artemia Urmiana and its Comparison with Other Type from Shrimp and Crab’s Shell [Volume 16, Issue 2, 2003]
-
A. Yousefi, A.
Improving Bitumen Properties by Polymeric Materials [Volume 15, Issue 2, 2002]
-
Aalaie, J.
Studies on the Rheological Behavior of Compatibilized HIPS/HDPE Blends [Volume 17, Issue 1, 2004]
-
Abasipour, Mina
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Abaszadeh, Ali
Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
-
Abbasi, F.
Manufacture and Investigation of Mechanical Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers [Volume 16, Issue 1, 2003]
-
Abbasi, F.
Effect of Carbon Black/Organoclay Hybrid Filler System on Tire Tread Compound Properties [Volume 21, Issue 4, 2008, Pages 339-346]
-
Abbasi, Farhang
Effects of Surface Microtopography on Wettability of Poly(dimethylsiloxane) Film: Superhydrophobicity [Volume 33, Issue 1, 2020, Pages 51-62]
-
Abbasi, Farhang
Effective Parameters on Reaction Kinetics and Particle Size in the Suspension Polymerization of Styrene in the Presence of Graphite [Volume 33, Issue 2, 2020, Pages 137-146]
-
Abbasi, Fatemeh
Effect of Exfoliated Graphene Nanoplatelets on Rheological, Morphological, Mechanical and Thermal Properties of Immiscible Polypropylene/Polystyrene (PP/PS) Blends [Volume 29, Issue 5, 2017, Pages 478-488]
-
Abbasi, Marjan
Determination of Morphological and Microstructural Properties of Polyacrylonitrile/Single-Walled Carbon Nanotubes Composite Nanofibers [Volume 27, Issue 4, 2014, Pages 279-267]
-
Abbasi Abianeh, A.
Prospects of Advanced Polymer Research in Industry [Volume 4, Issue 1, 1991]
-
Abbasi Abyaneh, A.
Effect of Curing System on Adhesion of Polyester Cord to Rubber in Radial Tires [Volume 12, Issue 3, 1999]
-
Abbasi sooraki, F.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Abbasi Sourki, F.
Effect of Carbon Black Type on Viscoelastic Properties of Elastomeric Compounds [Volume 17, Issue 1, 2004]
-
Abbasian, Mojtaba
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Abbasian, Mojtaba
Cellulose Modification Through Grafting of Polyacrylonitrile by Atom Transfer Radical Polymerization [Volume 28, Issue 4, 2015, Pages 332-323]
-
Abbasian, Mojtaba
Synthesis and Characterization of Copolymer Poly(propylene-co-styrene) Grafted-Multiple-walled Carbon Nanotubes by Nitroxide-mediated Living Radical Polymerization and Solution Intercalation Method [Volume 33, Issue 5, 2021, Pages 401-417]
-
Abbaspoor, Saleheh
Stabilization of Polymer Solar Cells and Their Importance in Photovoltaic Systems [Volume 34, Issue 2, 2021, Pages 99-129]
-
Abbaspour-Fard, Mohammad Hossein
Pyrolysis of Bioplastics Based on Bovine Gelatin-Potato Flour and Whey Protein-Potato Flour Blends and Their
Kinetics and Thermodynamic Analysis [Volume 31, Issue 6, 2019, Pages 575-592]
-
Abbaspour-Fard, Mohammad Hossein
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Abbassi-sourki, Foroud
Rheology of Semi-Cured Silicone Rubber Compounds [Volume 27, Issue 3, 2014, Pages 259-251]
-
Abbassi-sourki, Foroud
Online Morphology Development of Immiscible Polymer Blends in the Presence of an Interfacial Modifier [Volume 29, Issue 6, 2017, Pages 571-582]
-
Abbassi-Sourki, Foroud
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Abbassi-Sourki, Foroud
The Molecular Structure of SBR and Filler Type Effects on Thermal Diffusivity of SBR/BR Compounds Used in Tire Tread [Volume 30, Issue 2, 2017, Pages 139-149]
-
Abbassi-Sourki, Foroud
Elastomer Nanocomposites Reinforcements with Nanosilicon Carbide and Nanoclay Particles [Volume 31, Issue 1, 2018, Pages 43-55]
-
Abbassi-Sourki, Foroud
The Interdependence of Biodegradability, Morphology and Mechanical Properties in Polyolefin Elastomer/Starch Blends [Volume 31, Issue 1, 2018, Pages 69-79]
-
Abbassi-Sourki, Foroud
Study the Hyper-Viscoelastic and Stress Softening
Behaviors of Various SBR/CB Filled Compounds
Using a Triple Model [Volume 33, Issue 4, 2020, Pages 339-350]
-
Abbassi-Sourki, Foroud
Development of a New Model Based on Ogden-Roxburgh Model for the Prediction of the Stress-Softening Behavior of Carbon Black-Filled Rubber Compounds [Volume 35, Issue 1, 2022, Pages 67-80]
-
Abbassi-Sourki, Foroud
Study on the Effectiveness of Some Multicomponent Material Models with Hyper-viscoelasticity and Stress Softening for SBR/Carbon Black Compounds under two Loading Modes [Volume 35, Issue 6, 2023, Pages 555-564]
-
Abbassi Souraki, F.
On the Improvement of Physical and Mechanical Properties of PE by Crosslinking [Volume 14, Issue 2, 2001]
-
Abbassi Sourki, F.
Quantitative and Qualitative Study of Parameters of Hydrogenation Reaction of Nitrile Rubber by Instrumental Method [Volume 14, Issue 6, 2002]
-
Abdeali, Golnoosh
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
-
Abdeali, Golnoosh
Evaluation of Thermal Energy Storage of Phase Change Materials Based on Polyethylene Glycol Core and Thermal Conductive Polystyrene Shell for Heat Transfer Fluid Applications [Volume 36, Issue 3, 2023, Pages 307-320]
-
Abdeli, N.
Kinetics and Mechanism of Heterogeneous Graft Polymerization of Acrylic Acid onto Cellulose Initiated with Ceric Ammonium Nitrate [Volume 10, Issue 3, 1997]
-
Abdollahi, M.
Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
-
Abdollahi, M.
Poly(vinyl acetate)-Based Block Copolymer/Clay Nanocomposites Prepared by In Situ Atom Transfer Radical Polymerization [Volume 22, Issue 4, 2009, Pages 295-308]
-
Abdollahi, M.
Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
-
Abdollahi, Mahdi
Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator
Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
-
Abdollahi, Mahdi
Synthesis and Characterization of ω-Halogenated Poly(dimethyl siloxane) [Volume 26, Issue 6, 2014, Pages 484-475]
-
Abdollahi, Mahdi
Compositional Determination of Vinyl Acetate/Vinyl Benzoate Copolymer by Fourier Transform Infrared Spectroscopy [Volume 27, Issue 6, 2015, Pages 422-413]
-
Abdollahi, Mahdi
Synthesis and Characterization of Poly(vinyl acetate)-b-poly(dimethylsiloxane) Diblock Copolymer by Iodine Transfer Radical Polymerization [Volume 28, Issue 6, 2016, Pages 463-455]
-
Abdollahi, Mahdi
Effects of Molecular Iodine and 4-tert-Butylcatechol Radical Inhibitor on the Radical Polymerization of Styrene [Volume 30, Issue 2, 2017, Pages 95-104]
-
Abdollahi, Mahdi
Functional Groups and Structural Characterization of Unmodified and Functionalized Lignin by Titration, Elemental Analysis, 1H NMR and FTIR Techniques [Volume 30, Issue 5, 2018, Pages 405-418]
-
Abdollahi, Mahdi
Synthesis and Characterization of Native Lignin/Acrylamide-Based Copolymers Obtained by Graft Radical Polymerization [Volume 30, Issue 6, 2018, Pages 501-516]
-
Abdollahi, Mahdi
Radical Copolymerization of Vinylimidazole and
Vinylphosphonic Acid: Sequence Distribution-Glass Transition Temperature Relationship in Copolymers [Volume 32, Issue 6, 2020, Pages 521-534]
-
Abdollahi, Mahdi
Adsorption from Aqueous Solution Containing Zinc and Copper Ions with Carboxymethylated Kraft Lignin: Mechanism and Kinetic Study [Volume 34, Issue 4, 2021, Pages 359-371]
-
Abdollahi, Mahdi Abdollahi
Synthesis and Characterization of Vinyl Acetate and Dibutyl Maleate Copolymers by Reverse Iodine Transfer Radical Polymerization [Volume 28, Issue 1, 2015, Pages 72-61]
-
Abdollahi, Mehdi
Functionalization of Poly(vinyl alcohol) and Ethylene-Vinyl Alcohol Copolymer with Various Reactive Functional Groups: Synthesis and Characterization [Volume 31, Issue 4, 2018, Pages 385-400]
-
ABDOLLAHI BAGHBAN, SAHAR
The Developed Trends in Powder Coatings Technology [Volume 36, Issue 1, 2023, Pages 23-46]
-
Abdollahipaynavandi, Mitra
Study of Loading and Releasing of Fluvoxamine in Hydrogels Prepared by Ultrasound Irradiation [Volume 28, Issue 3, 2015, Pages 232-225]
-
Abdolvand, Hossein
Polyurethane Nanocomposites Based on Layered
Double Hydroxides: A Review on Their Syntheses
and Applications [Volume 33, Issue 5, 2021, Pages 369-384]
-
Abdoos, Hassan
Effect of Alumina Nanoparticles on the Rheological Behavior of Aluminum-Binder Mixtures for Powder Injection Molding [Volume 27, Issue 4, 2014, Pages 324-313]
-
Abdoos, M.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
-
Abdouss, M.
Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
-
Abdulkhani, Ali
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Abedi Lengi, Majid
Superabsorbent Sulfonated Polyacrylamide/Aluminum Nitrate Hydrogel: Swelling, Mechanical, Thermal and Structural Properties [Volume 30, Issue 5, 2018, Pages 419-433]
-
Abedi Moghadam, Hossein
Preparation and Determining Factors in Adhesion Properties of Acrylic Pressure-Sensitive Adhesive [Volume 28, Issue 6, 2016, Pages 476-465]
-
Abedian, A.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Abedini, H.
Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
-
Abedini, Hossein
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Abedini, Hossein
Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
-
Abedini, Reza
CO2/CH4 Separation by a Mixed Matrix Membrane of Polymethylpentyne/MIL-53 Particles [Volume 27, Issue 4, 2014, Pages 351-337]
-
Abedini, Reza
Effect of Amine-Functionalized MIL-53 Metal Organic Frameworks on the Performance of Poly(4-methyl-1-pentyne) Membrane in CO2/CH4 Separation Gas Mixture [Volume 28, Issue 2, 2015, Pages 147-131]
-
Abedini, Reza
A Mixed Matrix Membrane of Poly (4-methyl-1-pentyne) Filled with MIL 53 Particles and Its Application in Carbon Dioxide and Nitrogen Separation [Volume 29, Issue 2, 2016, Pages 127-138]
-
Abianeh, M.Zareie
A Guide to Designing Special Agitators [Volume 4, Issue 2, 1991]
-
Abkhezr, A.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Abodzadeh, M.A.
Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
-
Abolfathi, Ali
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Abolghasemi Fakhri, Leila
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Abolghasemi Fakhri, S.
Preparation of Conductive Polyaniline/Silica Composite [Volume 9, Issue 1, 1996]
-
Abtahi, M.
Studies on Peroxide Vulcanization and Mechanical Properties of Silica Filled EPDM in Presence of TAC Coupling Agent [Volume 15, Issue 6, 2003]
-
Abtahi, M.
Effect of Different Coupling Agents on Mechanical Properties of Silica Filled Reinforced EPDM Rubber Compounds [Volume 16, Issue 6, 2004]
-
Abtahi, M.
Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
-
Abtahi, M.
An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]
-
Abtahi, M.
A Theoretical and Experimental Study on the Footprint Analysis of a 185/65R14 Radial Tyre with Tread Pattern
Using Finite Element Method [Volume 20, Issue 6, 2008, Pages 589-598]
-
Abtahi, S.M.
The Effect of SBS Polymer on the Dynamic Properties of Asphalt [Volume 21, Issue 6, 2009, Pages 465-470]
-
Abtahi, S.M.
Effect of Polymer on Bitumen Properties and its Performance Grade [Volume 21, Issue 3, 2008, Pages 201-208]
-
Adeli, M.
Preparation of Cross-linked Copolymers Using Triblock and Diblock Copolymers Containing TEMPO End Groups [Volume 16, Issue 1, 2003]
-
Adib Nazari, S.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Adli, Vahdat
Synthesis of Self-Colored Nano-Sized Water-Dispersion Polyurethane Coatings with Tunable Particle Size and Color: Anionomer vs. Cationomer [Volume 31, Issue 6, 2019, Pages 519-538]
-
Afghani, T.
Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
-
Afkhami Aqda, Mohammad Reza
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Afrazi, H.
Effect of Silica Filler Concentration on Resistance of NBR Vulcanizates in Hot Oil [Volume 10, Issue 2, 1997]
-
Afshar, A.
Synthesis of Epoxy-Novalac Resin and Determination of its Physical and Mechanical properties [Volume 7, Issue 3, 1994]
-
Afshar, F.
Latex Technology [Volume 2, Issue 2, 1989]
-
Afshar, F.
Electrically Conducting Polymers [Volume 2, Issue 2, 1989]
-
Afshar, F.
Macromulecular Engineering by Anionic Methods [Volume 3, Issue 1, 1990]
-
Afshar, F.
Liquid Crystal Polymers [Volume 3, Issue 2, 1990]
-
Afshar, F.
Functionalization of PP Wax with Maleic Anhydride by Gamma-ray [Volume 14, Issue 4, 2001]
-
Afshar, F.
Electrical Conductivity of Short Carbon Fibers and Carbon Black- Reinforced Chloroprene Rubber [Volume 15, Issue 3, 2002]
-
Afshar, F.
Preparation and Characterization of Liquid Epoxy Resin DGEBA [Volume 16, Issue 1, 2003]
-
Afshar Ebrahimi, Ali
Pyrolysis Kinetics of Expanded Polystyrene and Polystyrene Wastes [Volume 34, Issue 5, 2022, Pages 469-483]
-
Afshar taromi, F.
Uncrosslinked Polyethylene Foam Production with Chemical Blowing Agents [Volume 20, Issue 2, 2007, Pages 119-124]
-
Afshar Taromi, F.
Kinetic Study of Bulk Polymerization of Methyl Methacrylate [Volume 6, Issue 3, 1993]
-
Afshar Taromi, Faramarz
CO2/N2 Gas Separation Using Nanocomposite Membranes Comprised of Ethylene-Propylene-Diene Monomer/Multi-Walled Carbon Nanotube (EPDM/MWCNT) [Volume 28, Issue 3, 2015, Pages 224-211]
-
Afshari, M.
Effect of Mixing Ratio and Compatibilizer on Rheological, Morphological and Thermal Properties of Polypropylene/Nylon 6 Alloy [Volume 14, Issue 4, 2001]
-
Afzali, S.K.
The Compounding of Phenolic Nitrile Blends: I-Effect of Phenolic Resin [Volume 14, Issue 5, 2002]
-
Afzali, S.K.
The Compounding of Phenolic Nitrile Blends: II-Effect of Nitrile Elastomer Type [Volume 14, Issue 5, 2002]
-
Agbolaghi, Samira
Stabilization of Polymer Solar Cells and Their Importance in Photovoltaic Systems [Volume 34, Issue 2, 2021, Pages 99-129]
-
Aghaei, Mahdi
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Aghaghafari, Elham
Solubility and Phase Transfer of Insoluble Dyes in Organic Solvent by Polyurethane Reverse Micelle [Volume 34, Issue 5, 2022, Pages 443-455]
-
Aghajani, Masoud
Functionalized Zeolitic-Imidazole Frameworks-8 Based Poly(ether-b-amide) Nanocomposite Membrane for Carbon Dioxide/Methane Gas Separation: Synthesis and Characterization [Volume 31, Issue 1, 2018, Pages 3-14]
-
Aghajani, R.H.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Aghajari, Ehsan
Responses of Polystyrene/MWCNT Nanocomposites to Electromagnetic Waves and the Effect of Nanotubes Dispersion [Volume 27, Issue 3, 2014, Pages 201-193]
-
Aghdami, A.M.
Simulation of Pultrusion Manufacturing Process of Glass/Polyester Composites [Volume 23, Issue 4, 2010, Pages 323-333]
-
Aghdasinia, Hassan
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Aghelinejad, Zeinab
Electron Beam-Irradiated Crosslinked Hydrogel Scaffold form Natural and Synthetic Polymers:
Synthesis and Characterization [Volume 36, Issue 1, 2023, Pages 47-60]
-
Aghili, Y.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Aghlara, H.
Picofarads Capacitance Base on Conducting Polyaniline Films [Volume 15, Issue 1, 2002]
-
Aghvami-Panah, Mohammad Hassan
Mechanical Properties and Electromagnetic Interference (EMI) Shielding Performance of PP/CNT/Glass Fiber Microcellular Foam [Volume 34, Issue 4, 2021, Pages 373-385]
-
Ahmad Khanbeigi, F.
The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
-
Ahmadi, A.
Kinetics of Polyurethane Polymerization Using Differential Scanning Calorimetry [Volume 4, Issue 3, 1991]
-
Ahmadi, A.
Kinetics of Polyurethane Polymerization Using Fourier Transform Infrared Spectrophotometry (FTIR) [Volume 5, Issue 2, 1992]
-
Ahmadi, A.
Processing of Linear Low Density Polyethylene Film (LLDPE) [Volume 7, Issue 1, 1994]
-
Ahmadi, A.
The Use of Fluoroelastomers in Processing of LLDPE Films [Volume 8, Issue 1, 1995]
-
Ahmadi, A.
Preparation of Cellular Rigid PVC by Extrusion: Investigation on Processing Variables [Volume 8, Issue 4, 1995]
-
Ahmadi, Amin
Synthesis of Nanocomposite Hydrogels Based on Sodium Alginate for Effective Removal of Methylene Blue and Antibacterial Applications [Volume 31, Issue 2, 2018, Pages 186-202]
-
Ahmadi, Ashraf
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Ahmadi, Ebarahim
Atom Transfer RaAtom Transfer Radical Polymerization of Methyl Methacrylate Using Bis(2-dodecylsulfanyl-ethyl)-Amine/Copper Bromide: Kinetic Study [Volume 31, Issue 2, 2018, Pages 143-154]
-
Ahmadi, Ebrahim
Synthesis of Chromium-Based Catalysts and Study of Various Solvents on the Morphology and Structural
Parameters of the Catalysts in Ethylene Polymerization [Volume 34, Issue 3, 2021, Pages 233-247]
-
Ahmadi, Hamed
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Ahmadi, Isa
Kinetic Theory of Fracture Strength in Prediction of Fatigue Lifetime of Epoxy/Carbon Fiber Composites [Volume 29, Issue 5, 2017, Pages 429-441]
-
Ahmadi, Kamran
A Survey on Applications of Nanomaterials for Conservation of Artworks [Volume 30, Issue 5, 2018, Pages 371-389]
-
Ahmadi, Leila Sadat
Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
-
Ahmadi, M.
Effect of Carbon Black/Organoclay Hybrid Filler System on Tire Tread Compound Properties [Volume 21, Issue 4, 2008, Pages 339-346]
-
Ahmadi, M.
Surveying the Influence of Reclaimed Rubber and Rubber Powder on Physical, Dynamical and Processing Properties of NR/BR Compound [Volume 21, Issue 3, 2008, Pages 217-223]
-
Ahmadi, M.
Effect of Process Parameters of Mixing on Physicomechanical and Rheological Properties of Rubber Compound [Volume 21, Issue 3, 2008, Pages 225-234]
-
Ahmadi, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Ahmadi, M.S.
Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
-
Ahmadi, Reyhane
Modification of Poly(ether-b-amide) Membrane Properties Using Glycerol for CO2/N2 Gas Separation [Volume 31, Issue 5, 2019, Pages 461-474]
-
Ahmadi, Shervin
Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]
-
Ahmadi, Shervin
The Effect of Process Parameters on the Synthesis of Thermoplastic Polyurethane Elastomer Through Reactive Melt Blending [Volume 33, Issue 1, 2020, Pages 41-49]
-
Ahmadi, Shervin
Fire Performance of Intumescent Flame Retardant/Nanosilica/Thermoplastic Polyurethane Composite:
A Study on Synergism [Volume 36, Issue 1, 2023, Pages 73-86]
-
Ahmadi, Z.
Effect of Tension on the Light Stability of Polypropylene Filament Yarns [Volume 15, Issue 3, 2002]
-
Ahmadi, Z.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Ahmadi, Zahra
Photo-oxidation of Polypropylene Fiber and Effective Parameters: A Review [Volume 26, Issue 3, 2013, Pages 208-179]
-
Ahmadi-Shooli, Sima
The Properties of SBR/ENR50 Blend Containing Nanoclay/Carbon Black Dual Filler System Cured by Electron Beam [Volume 30, Issue 2, 2017, Pages 127-137]
-
Ahmadian-Alam, L.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Ahmadian-Alam, laleh
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Ahmadjo, S.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Ahmadjo, S.
Synthesis of Metallocene Catalyst for Terpolymerization of Ethylene, Propylene and Diene [Volume 27, Issue 1, 2014, Pages 35-25]
-
Ahmadjo, Saeed
Effect of Polysulfone and Graphene Nanosheets on the Flexibility of Epoxy Coatings [Volume 30, Issue 2, 2017, Pages 105-114]
-
Ahmadjo, saeid
Cyclic Olefin Copolymers: Superseding Glass Optical Characteristics with Plastics in Medical Devices [(Articles in Press)]
-
Ahmadjo, Saeid
Comparison of Ethylene/1-Hexene Copolymers Microstructures Synthesized by Homogeneous and Heterogeneous Metallocene Catalysts [Volume 26, Issue 1, 2013, Pages 15-24]
-
Ahmadjo, Saeid
Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
-
Ahmadjo, Saeid
Synthesis and Functionalization of α-Olefines (6 and 10 Carbons)/Maleic Anhydride Comb-like Copolymers and Their Application in Silica Nanohybrid and Hydrogel [Volume 33, Issue 6, 2021, Pages 537-551]
-
Ahmadjo, Saied
1-Hexene Polymerization Using Ziegler-Natta Catalytic System with Response Surface Methodology [Volume 30, Issue 3, 2017, Pages 197-206]
-
Ahmadjoo, S.
Study of Variation in Chemical Composition of EPDM Elastomers Synthesized with Ziegler-Natta Catalyst Based on Vanadium During Terpolymerization [Volume 16, Issue 5, 2004]
-
Ahmadpour, A.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Ahmadzadeh, A.
Studying and Analyzing the Effect of SBR Substitution by PU in Rubber Compounds Properties [Volume 15, Issue 5, 2003]
-
Aiemzadeh, I.
Controlled Release of Nutrients from Hydrogel Biopolymers [Volume 7, Issue 2, 1994]
-
Akbar, Raheleh
Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization [Volume 28, Issue 6, 2016, Pages 453-443]
-
Akbari, Ali
Study on the Impact of Coagulation Bath Temperature on the Surface Morphology and Performance of Polyethylene Membrane Prepared by TIPS Method in Purification of Collagen Protein [Volume 28, Issue 5, 2015, Pages 407-395]
-
Akbari, Ali
Study on the Fouling Behavior of Polyethylene and Silica Nanoparticles Mixed Matrix Membranes in Filtration of Humic Acid Solution [Volume 29, Issue 4, 2016, Pages 347-363]
-
Akbari, Ali
Evaluation of Wetting Behavior of Nanocomposite Polypropylene Hollow Fiber Membrane as a Membrane Contactor for CO2 Removal [Volume 31, Issue 4, 2018, Pages 331-344]
-
Akbari, Babak
Different Rols of Modified Organoclay in Deformation Mechanism Control of Polymeric Matrices [Volume 27, Issue 1, 2014, Pages 14-3]
-
Akbari, Z.
The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
-
Akbari Roknabadi, Saeed
Extension of Slitting Method for Simultaneous Measurement of Residual Normal and Shear Stresses in Polymer Composites [Volume 25, Issue 4, 2012, Pages 301-313]
-
Akbari Taemeh, Mahdokht
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Akbarian, M.
Composites [Volume 1, Issue 1, 1988]
-
Akbarian, M.
Composites (2) [Volume 1, Issue 2, 1988]
-
Akbarian, M.
Composites (3) [Volume 2, Issue 1, 1989]
-
Akbarian, M.
Composites (4) [Volume 2, Issue 2, 1989]
-
Akbarian, M.
Structural Foams [Volume 5, Issue 1, 1992]
-
Akbarinezhad, E.
Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
-
Akbarshahi, Mehdi
Optimization of Gas Barrier Properties of Nanocomposites of HDPE/Nanoclay Using
Response Surface Methodology [Volume 33, Issue 1, 2020, Pages 25-39]
-
Akbarzadeh, Saleh
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Akhavan, A.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Akherati Sany, Seyed Reza
Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles [Volume 30, Issue 1, 2017, Pages 3-17]
-
Akhlaghi, Reza
The Effect of Graphite Nanoparticles on Thermal Stability and Ablation of Phenolic/Carbon Fiber/Graphite Nanocomposites [Volume 27, Issue 3, 2014, Pages 249-241]
-
Akhtari, Saeede
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Ako, M.
The Effect of Shear Rate on Dissolution of Gas and Cell Density in Continuous Foaming Process [Volume 22, Issue 3, 2009, Pages 209-215]
-
Ako, Mohammad
Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
-
Ako, Mohammad
The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
-
Ako, Mohammad
Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
-
Ako, Mohammad
Control of Foam Structure in PolyStyrene-Nanosilica-Carbon Dioxide: Effect of Temperature and Nanoparticles [Volume 29, Issue 1, 2016, Pages 73-88]
-
Akrami, Hamidreza
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Alaei, E.
Tricalcium Phosphate Containing Sodium Hexametaphosphate as Polymer Suspension Stabilizer [Volume 21, Issue 5, 2009, Pages 401-408]
-
Alahmadi, M.Jami
Rheological Properties of the Gel Systems Used in Petroleum Reservoirs [Volume 6, Issue 2, 1993]
-
Alahyarizadeh, Ghasem
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Alaie, J.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Alavi, E.
Extraction, Fractionation and Molecular Weight Determination of Alginic Acid From Phaeophytas of Persian Gulf [Volume 11, Issue 4, 1998]
-
Alavi, S.M.B.
Investigation of Factors ِِِAffecting the Surface Quality of Pultruded Profiles [Volume 15, Issue 4, 2002]
-
Alavi, S.M.B.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Alavi, Seyed Ali
Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk [Volume 27, Issue 1, 2014, Pages 78-63]
-
Alavi Nikje, Mir Mohammad
Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization [Volume 28, Issue 6, 2016, Pages 453-443]
-
Albooyeh, Alireza
Effect of Mesoporous Silica and Hydroxyapatite Nanoparticles on the Tensile and Dynamic Mechanical Thermal Properties of Polypropylene and Polypropylene Foam [Volume 27, Issue 5, 2014, Pages 439-423]
-
Ali Hosseini, F.
Investigation of Protease Enzyme Effect on Some of the Physical Properties of Woolen Yarn [Volume 13, Issue 3, 2000]
-
Ali Hosseini, F.
Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes [Volume 15, Issue 3, 2002]
-
Ali Kasraian, Ali
Preparation and Study on Properties of Superabsorbent Hydrogel Composite of Acrylamide-Acrylic Acid and Zeolite in Agricultural Uses [Volume 30, Issue 5, 2018, Pages 391-404]
-
Ali Semsarzadeh, Mohammad
Using Cyclohexanol as a Co-Surfactant in the Synthesis of New Mesoporous Silica Particles [Volume 26, Issue 6, 2014, Pages 524-513]
-
Aliha, M.R.M.
Fracture Toughness Evaluation for Brittle Polymers under Combined Tensile-shear Loading [Volume 21, Issue 2, 2008, Pages 107-117]
-
Alikhani Faradonbeh, Elham
Anticorrosion Self-Healing Polymer Coatings Containing Micro/Nanofibers with Core-Shell Microstructures: A Review [Volume 36, Issue 5, 2023, Pages 527-537]
-
Alimardani, Mohammad
Mechanistic Evaluation of Silane-spacer Length on Dynamic and Tribological Behavior of SBR-Modified Silica Rubber Composite [Volume 30, Issue 6, 2018, Pages 489-500]
-
Alimardani, Mohammad
Evaluation of Fatigue Crack Growh Resistance of
Rubber-Silica Composites and Analysis of the Role of Filler-Filler Interaction and Interface Bonding [Volume 32, Issue 5, 2020, Pages 397-409]
-
Alimardani, Mohammad
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
-
Alimohammadi, Farbod
Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
-
Alinejad, Zeinab
Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
-
Alipoor, E.
Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]
-
Alipour, M.
Living Radical Polymerization [Volume 10, Issue 1, 1997]
-
Alirezaei Shahraki, Sara
An Experimental Study on Flexural Properties of Jute Fiber/Aluminum Laminates [Volume 33, Issue 4, 2020, Pages 351-362]
-
Alizadeh, Maryam
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Alizadeh, Mehran
Application of Hydrogels in Adsorptive Removal of Aqueous Pollutants [Volume 31, Issue 6, 2019, Pages 499-518]
-
Alizadeh, Narges
PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
-
Alizadeh Feremi, Jafar
Rhodamine B Dye Removal from Aqueous Solutions Using Poly(N-vinylpyrrolidone-co-maleic anhydride)/Rice Husk Biocompatible Nanocomposite: Isothermal, Kinetics and Thermodynamic Studies [Volume 31, Issue 1, 2018, Pages 81-92]
-
Allahyarzadeh, V.
Surface Modification of Polyester by Nano Titanium Dioxide in Alkaline Media and Their Synergism Effect on the Fabric [Volume 26, Issue 5, 2014, Pages 437-450]
-
Almasi, H.
Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing
Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
-
Almasi, Hadi
Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
-
Almasi, Hadi
Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
-
Amani, S.
Effect of Difunctional Monomers on the Wear Resistance of Acrylic Teeth [Volume 13, Issue 3, 2000]
-
Amani-Tehran, Mohammad
The Effect of Electrical Stimulation on Growth and Proliferation of Neural Cells Using Conductive Nanofibrous Scaffolds [Volume 31, Issue 5, 2019, Pages 427-434]
-
Amani-Tehran, Mohammad
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
-
Amedi, Hamidreza
Functionalized Zeolitic-Imidazole Frameworks-8 Based Poly(ether-b-amide) Nanocomposite Membrane for Carbon Dioxide/Methane Gas Separation: Synthesis and Characterization [Volume 31, Issue 1, 2018, Pages 3-14]
-
Amini, Golchehr
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
-
Amini, H.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Aminifazl, Mohammad Sadegh
Magnetic Graphene Quantum Dot/Chitosan Bionanocomposite Hydrogel Beads for Drug Delivery System: Synthesis and Application [Volume 36, Issue 4, 2024, Pages 409-420]
-
Aminzadeh, A.
Application of Laser Raman Spectroscopy in Polymer Chemistry and Technology [Volume 8, Issue 2, 1995]
-
Aminzadeh, A.
Application of Laser Raman Spectroscopy in the Study and Identification of Fibers [Volume 8, Issue 4, 1995]
-
Amirabedi, Parya
Evaluation of Wetting Behavior of Nanocomposite Polypropylene Hollow Fiber Membrane as a Membrane Contactor for CO2 Removal [Volume 31, Issue 4, 2018, Pages 331-344]
-
Amirabedi, Parya
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
-
Amirabedi, Parya
Optimization of Effective Parameters in Fabrication of PVC Flat Sheet Membranes by Response Surface Method for Application in Humic Acid Separation [Volume 36, Issue 4, 2024, Pages 421-435]
-
Amirabedi, Parya
Two-way facilitated transport membrane for CO2 separation with synergy of nucleophilic addition and π-complexing reactions: Molecular simulation and experimental study [(Articles in Press)]
-
Amiri, Afsaneh
Study of Loading and Releasing of Fluvoxamine in Hydrogels Prepared by Ultrasound Irradiation [Volume 28, Issue 3, 2015, Pages 232-225]
-
Amiri, D.
Study of Mechanical Properties of HDPE/LLDPE Blend [Volume 10, Issue 4, 1997]
-
Amiri, D.
Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]
-
Amiri, E.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Amiri, Farzaneh
Conversion of Lignocellulosic Bagasse Biomass into Hydrogel [Volume 29, Issue 5, 2017, Pages 455-467]
-
Amiri, Iraj
Effect of Solid Epoxy Resin on Properties of an Epoxy/Glass Prepreg [Volume 34, Issue 5, 2022, Pages 485-497]
-
Amiri Amraei, Iraj
Relationship Between the Process Parameters and Resin Content of a Glass/Epoxy Prepreg Produced by Dipping Method [Volume 27, Issue 6, 2015, Pages 402-391]
-
Amiri Amraei, Iraj
Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles [Volume 30, Issue 1, 2017, Pages 3-17]
-
Amiri Amraie, Iraj
Optimization of Tensile Strength of Phenolic-Glass Compound for Compression Molding Process [Volume 28, Issue 1, 2015, Pages 26-19]
-
Amiri Amraie, Iraj
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Amirian, Ali
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Amirshahi, S.H.
Chemical Modification of Cellulose to Improve Its Transfer Printability [Volume 13, Issue 4, 2000]
-
Amjadi, M.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
-
Anaraki, M.Saeedi
Gel Spinning of UHMWPE: Effect of Processing Parameters and Raw Materials on Fiber Structure [Volume 18, Issue 2, 2005]
-
Andideh, Mohammad
Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
-
Angaji, M.Torabi
Synthesis, Characterization and Investigation on the Kinetics of Melamine Formaldehyde Alkylation Reaction by Methanol [Volume 11, Issue 2, 1998]
-
Anjomani, R.
Effect of Simultaneous Boiling off and Bleaching (Discontinuous) on the Strength of 100% Grey Cotton Fabric [Volume 15, Issue 4, 2002]
-
Ansari, N.
Capillary Water Transport In Yarns [Volume 8, Issue 2, 1995]
-
Ansari, N.
Measurement of Textile Fibers Wettability and the Problems Involved [Volume 15, Issue 1, 2002]
-
Anvarsalar, Adelee
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Arab, Behroz
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Arab, Kosar
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Arab-Bafrani, Zahra
Fibrous Structures Fabricated from
Polylactic Acid and Nanofibrillated Chitosan/
Zinc Oxide Nanoparticles [Volume 34, Issue 2, 2021, Pages 173-190]
-
Arab Bafrani, Mohammad Reza
Simulation of Rubber Friction Using Viscoelastic Behavior of Rubber and Roughness Parameters of Surfaces [Volume 26, Issue 2, 2013, Pages 149-158]
-
Arabgol, F.
NdFeB-PEG Permanent Polymeric Composite Magnet [Volume 16, Issue 3, 2003]
-
Arabgol, Fatemeh
Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]
-
Arabi, A.
Synthesis of Metallocene Catalyst for Terpolymerization of Ethylene, Propylene and Diene [Volume 27, Issue 1, 2014, Pages 35-25]
-
Arabi, H.
Characterization of Powder Molding Compounds (PMC) [Volume 14, Issue 6, 2002]
-
Arabi, H.
Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
-
Arabi, H.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Arabi, H.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Arabi, H.
Preparation of Silicious Mesoporous Spherical and Rod- Like MCM-41 Using Cetyltrimethylammonium Bromide
as the Structure Directing Agent [Volume 21, Issue 3, 2008, Pages 243-250]
-
Arabi, H.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Arabi, H.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Arabi, Hassan
Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
-
Arabi1, Hassan
Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
-
Araghchi, Masoud
Evaluation of Polymer Wettability Alteration and Adsorption of Modified Silica Nanoparticles for Enhanced Oil Recovery [Volume 33, Issue 3, 2020, Pages 272-285]
-
Aram, Elham
Polymer Electrolytes for Lithium Batteries : A Review on Types, Characteristics and Challenges [Volume 36, Issue 4, 2024, Pages 365-391]
-
Arami Ghahfarokhi, Fatemeh
Hole-Transporting Materials Based on p-Type Polymers in Invert Perovskite Solar Cells [Volume 36, Issue 2, 2023, Pages 107-132]
-
Ardeh, S.Navaee
Preparation of Alpha Cellulose from Poplar Sawdust [Volume 17, Issue 3, 2004]
-
Arefazar, A.
Study of the Effect of Core-Twist Hybrid Yarn Glass/PET on Mechanical Properties of Unsaturated Polyester Resin [Volume 16, Issue 1, 2003]
-
Arefazar, A.
Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
-
Arianejad, Mahmood
Water Jet Rubber Powder in Passenger Tyre Tread Formulation [Volume 31, Issue 2, 2018, Pages 111-127]
-
Arjomand, M.
The Properties of Polymer-Modified Asphalt Drived from Vacuum Bottom and Wastes of PE and SBR Plants [Volume 21, Issue 3, 2008, Pages 235-241]
-
Arjomandi, Jalal
In Situ Spectroelectrochemical Analysis of Electrochemically Synthesized Conductive Nanocomposites Based on Poly(2-minophenol)/ Titanium Dioxide and Zinc Oxide [Volume 30, Issue 4, 2017, Pages 325-335]
-
Arsalani, N.
Chemical Synthesis of Conducting Polythiophene [Volume 3, Issue 3, 1990]
-
Arsalani, N.
The Applications of Electrically Conducting Polymers [Volume 4, Issue 2, 1991]
-
Arsalani, N.
Electropolymerization of Thiophenes and Some of its Derivatives [Volume 5, Issue 3, 1992]
-
Arsalani, N.
Infuence of Electrochemical Protonation and Doping on the Electrical Conductivity of BasicPolyaniline [Volume 6, Issue 4, 1993]
-
Arsalani, Naser
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Arvaneh, Amir-Reza
Biodegradable Aliphatic Polyesters for Application in Tissue Engineering [Volume 34, Issue 4, 2021, Pages 319-348]
-
As’habi, L.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Asadi, Aghil
Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications [Volume 33, Issue 6, 2021, Pages 525-535]
-
Asadi nejad, A.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Asadinejad, Ahmad
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
-
Asadinezhad, A.
Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
-
Asadolahi, Mehrdad
Surface Modification of Electrospun Poly(vinylidene fluoride) Membrane by Low-Pressure Plasma Polymerization to Improve Long-Term Membrane Performance in Water Desalination Process Based on Air Gap Membrane Distillation Method [Volume 35, Issue 2, 2022, Pages 151-162]
-
Asadpoor, Y.A.
Quality Evaluation of Chitin and Chitosan Extracted from Cyst Shell of the Artemia Urmiana and its Comparison with Other Type from Shrimp and Crab’s Shell [Volume 16, Issue 2, 2003]
-
Asefnejad, Azadeh
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Asgari, Mahdieh
Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
-
Asgari, Pejman
Fabrication and Surface Modification of PES-Based Nanofiltration Membrane Using Polymethyl Methacrylate/Graphene Oxide Nanoplates [Volume 36, Issue 5, 2023, Pages 551-565]
-
Asgary, Masoud
Evaluation of Polymer Wettability Alteration and Adsorption of Modified Silica Nanoparticles for Enhanced Oil Recovery [Volume 33, Issue 3, 2020, Pages 272-285]
-
Asghari, Jila
A Review of Polyphosphazenes' Synthetic Methods [Volume 7, Issue 3, 1994]
-
Ashenagar, Samaneh
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Ashenagar, Samaneh
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Ashjari, Mohsen
Preparation and Evaluation of Polymer Aerogel
Adsorbents Based on Polyacrylonitrile Fibers to
Remove Oil Contaminants from Seawater [Volume 34, Issue 3, 2021, Pages 299-311]
-
Ashkani, Mojdeh
Modification of Rice Husk with Glycidyl Crosslined Microgel Latex for Preparation of Hybrid Hydrogel [Volume 31, Issue 2, 2018, Pages 129-141]
-
Ashori, Alireza
Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
-
Ashouri Kajidi, H.
Biopolishing of Cotton Fabrics in Enzymatic Desizing Process [Volume 11, Issue 4, 1998]
-
Askari, F.
Synthesis and Characterization of Bisphenol A-glycidyl Methacrylate Monomer and Study of the Physical and Mechanical Properties of Its Dental Composite [Volume 15, Issue 5, 2003]
-
Askari, Fatemeh
Polyvinyl Alcohol-Sulfonated Polyethersulfone Blend for Application in Proton-Exchange Membranes [Volume 29, Issue 5, 2017, Pages 405-414]
-
Asl, V.Haddadi
Study of Effective Paramertes on Polymerization Kinetics of HDPE [Volume 20, Issue 1, 2007]
-
Astaraki, Mohammad hossein
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Ataei, M.
Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
-
Ataei, S. Ahmad
Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
-
Ataei, Seyed Ahmad
Effect of Magnetic Field on the Type and Amount of Monomers in Polyhydroxyalkanoate Copolymer [Volume 27, Issue 4, 2014, Pages 298-291]
-
Atai, M.
Characterization and Synthesis of Denture Base Polymer [Volume 14, Issue 1, 2001]
-
Atai, M.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Atai, Mohammad
Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
-
Atai, Mohammad
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Atai, Mohammad
Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
-
Atai, Mohammad
Effect of Salt on Gelation Behavior of Injectable Nanocomposite Scaffold Based on Hydroxypropyl Methylcellulose and Hydroxyapatite/Tricalcium Phosphate Nanoparticles [Volume 27, Issue 2, 2014, Pages 109-99]
-
Atai, Mohammad
Properties of Nitrile Rubber/Clay Nanocomposites Prepared by In-Situ Emulsifier-free Emulsion Polymerization [Volume 28, Issue 3, 2015, Pages 242-233]
-
Atai, Mohammad
Temperature-Responsive Hydrogels: Materials, Mechanisms and Biological Applications [Volume 31, Issue 3, 2018, Pages 211-237]
-
Atai, Mohammad
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Atashi, H.
Effect of Mixing Process on Mooney Viscosity and Die Swell Behavior of Rubber Compound [Volume 21, Issue 5, 2009, Pages 389-399]
-
Atashi, H.
Improvement in Tear Resistance and Crack Growth of Tire Tread Compound with Effective Cure Systems and
Use of Semi-Reinforcement Fillers [Volume 21, Issue 4, 2008, Pages 285-295]
-
Atashi, Hossein
Failure Optimization and Curing Properties of a Passenger Tire Tread Compound [Volume 23, Issue 3, 2010, Pages 187-201]
-
Atashipour, S.R.
Resin Flow in Fiber Preformed by Vacuum Assisted Resin Transfer Molding with Flexible Tools [Volume 21, Issue 4, 2008, Pages 329-338]
-
Attar, M.R.
Study of Thermal Behavior of Polyester and Epoxy/Polyester Powder Lacquers [Volume 16, Issue 5, 2004]
-
Attari, Nasrin
The Effects of Bore Fluid Composition and Coagulation Bath Temperature on the Structure and Performance of Polysulfone Hollow Fiber Membranes in Collagen Separation [Volume 29, Issue 6, 2017, Pages 559-570]
-
Audouin, L.
Chemiluminescence of Polyamide 6 [Volume 7, Issue 1, 1994]
-
Audouin, L.
Chemiluminescence of Polyamides: 2-Mechanism and Kinetics of Oxidation [Volume 8, Issue 1, 1995]
-
Avar, Sajad
A Comparative Study of CO2-Responsive Worm-like Micelles Prepared by Macromolecules and Small Molecules [Volume 31, Issue 3, 2018, Pages 265-274]
-
Avazverdi, Ehsan
The Mechanical Properties of Recycled Polyethylene-Polyethylene Terephthalate Composites [Volume 27, Issue 6, 2015, Pages 389-381]
-
Ayati, B.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
-
Ayatollahi, M.R.
Investigation of Fracture in V-notched Brittle Polymers under Pure Shear Loading [Volume 22, Issue 1, 2009, Pages 63-73]
-
Ayatollahi, M.R.
Fracture Toughness Evaluation for Brittle Polymers under Combined Tensile-shear Loading [Volume 21, Issue 2, 2008, Pages 107-117]
-
Ayatollahi, Majid Reza
Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
-
Azadbakht, Kimiya
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Azadeh, Maedeh
Mesoporous Silica Formation by Block Copolymers and Cetyltrimethylammonium Bromide as Structure Control Agent [Volume 24, Issue 6, 2012, Pages 445-453]
-
Azadfallah, Mohammad
Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
-
Azadi, Nasim
Effects of Adding Nanosilica on Acrylic and Siloxane Hydrophobic Coatings to Protect Calcite Stones [Volume 32, Issue 1, 2019, Pages 15-29]
-
Azamian, Fariba
A Poly(vinyl acetate)/Colloidal SiO2 Nanocomposite Synthesized by Emulsion Polymerization and Study of Its Mechanical, Thermal and Rheological Properties [Volume 30, Issue 2, 2017, Pages 151-161]
-
Azamian Jazi1, Mehrdad
A Poly(vinyl acetate)/Colloidal SiO2 Nanocomposite Synthesized by Emulsion Polymerization and Study of Its Mechanical, Thermal and Rheological Properties [Volume 30, Issue 2, 2017, Pages 151-161]
-
Azar, M.H.Poornaghi
Selective Memberance Electrodes and Electrochemical Sensors [Volume 6, Issue 1, 1993]
-
Azar, M.Siroos
Investigation of the Mechanical Properties of Polyvinyl Alcohol Nanocomposite Hydrogels [Volume 17, Issue 5, 2005]
-
Azarnasab, M.
Investigation of Factors Affecting Slurry Copolymerization of Acrylonitrile - Vinylacetate for Preparation of Acrylic Fibers [Volume 14, Issue 1, 2001]
-
Azdast, Taher
Experimental Study on Oriented Mechanical, Rheological and Optical of a Multi-Walled Carbon Nanotube/Polymethyl Methacrylate Anisotropic Nanocomposite [Volume 29, Issue 3, 2016, Pages 249-263]
-
Azdast, Taher
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Azdast, Taher
Effect of Printer Process Parameters of Fused Filament Fabrication on the Tensile Strength and Density of Polylactic Acid/Nanoclay Nanocomposites [Volume 36, Issue 5, 2023, Pages 539-549]
-
Azidhak, Sorena
An Overview on Piezoelectric Cellular Polymers: Properties and Preparation [Volume 33, Issue 1, 2020, Pages 3-24]
-
Azimvand, Jafar
Polymer Hydrogels Based on Acrylic Acid and Acrylamide and Their Applications to Remove Cationic Dye of Basic Red 46 (BR 46) from Aqueous Solutions [Volume 31, Issue 1, 2018, Pages 27-41]
-
Aziz, Hamed
Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticle Functionalization [Volume 27, Issue 5, 2014, Pages 394-383]
-
Azizi, A.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Azizi, Elimira
In Situ Spectroelectrochemical Analysis of Electrochemically Synthesized Conductive Nanocomposites Based on Poly(2-minophenol)/ Titanium Dioxide and Zinc Oxide [Volume 30, Issue 4, 2017, Pages 325-335]
-
Azizi, H.
Sioplas Crosslinking of PE: The Effect of EVA on Properties of XLPE [Volume 14, Issue 5, 2002]
-
Azizi, H.
Sioplas Crosslinking of Polyethylene: Study of the Effect of Alumina Trihydrate and Antimony Trioxide on Properties of XLPE [Volume 15, Issue 6, 2003]
-
Azizi, H.
Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
-
Azizi, H.
Investigating the Effect of Wood Particle Size on the Rheology and Physical-Mechanical Properties of
Wood-Polypropylene Composite [Volume 21, Issue 1, 2008, Pages 45-52]
-
Azizi, Hamed
Correlation between Microstructure and Rheological Properties of Broad Molecular Weight Distribution High Density Polyethylenes [Volume 28, Issue 1, 2015, Pages 38-27]
-
Azizi, Hamed
Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene)/ Modified Thermoplastic Starch Blends [Volume 29, Issue 4, 2016, Pages 311-321]
-
Azizi, Hamed
Shear-Induced Crystallization of Poly(lactic acid)/Graphene Nanocomposite [Volume 29, Issue 5, 2017, Pages 415-427]
-
Azizi, Hamed
The Interdependence of Biodegradability, Morphology and Mechanical Properties in Polyolefin Elastomer/Starch Blends [Volume 31, Issue 1, 2018, Pages 69-79]
-
Azizi, M.T.
Improvement in Purification Method of a Synthesized Cyclic Dimeric Lactide [Volume 21, Issue 3, 2008, Pages 251-257]
-
Azizi, Maryam
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
B
-
B.,
Study of Association Behavior in Step Growth HEUR Aqueous Solutions [Volume 16, Issue 6, 2004]
-
B., A.
Kinetics of Polyurethane Polymerization Using Fourier Transform Infrared Spectrophotometry (FTIR) [Volume 5, Issue 2, 1992]
-
Baba Mohammadi, M.
Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]
-
Babaahmadi, Masoud
Mechanical and Shape Memory Properties of Poly(vinyl acetate)/Poly(lactic acid) Blends [Volume 31, Issue 1, 2018, Pages 57-68]
-
Babaei, Amir
Effect of Organo-clay Modifier and Compatibilizer on the Morphological Development and Cold Crystallization Kinetics of Polylactide/Polyethylene/Montmorillonite Nanocomposites [Volume 31, Issue 3, 2018, Pages 251-264]
-
Babaei, Amir
A New Modified Emulsion Model for Immiscible
Binary Polymeric Blends Containing Nanoparticles Distributed in Droplets [Volume 34, Issue 1, 2021, Pages 81-92]
-
Babaei, Maryam
Cyclic Olefin Copolymers: Superseding Glass Optical Characteristics with Plastics in Medical Devices [(Articles in Press)]
-
Babaki, E.
Application of DRISPAC Polymer in the Water Loss Control of Drilling Mud [Volume 14, Issue 6, 2002]
-
Babalou, A.A.
Manufacture of Porous Support Systems of Membranes Using In-situ Polymerization [Volume 15, Issue 3, 2002]
-
Babanzadeh, Samal
Synthesis, Characterization, and Properties of Novel Aromatic UV Absorber Polyamides [Volume 32, Issue 4, 2019, Pages 327-337]
-
Badalkhani, Ommolbanin
Preparation and Characterization of Conducting Polymer Latices by Chemical Polymerization of Aniline or Anisidine in Presence of Latex: Study of Their Electroactivity and Anti-Corrosion Properties [Volume 26, Issue 4, 2013, Pages 325-317]
-
Badii, F.
Effect of Molecular Structure on the Thermal Properties and Water Sorption of Thin Gelatin Films [Volume 21, Issue 1, 2008, Pages 27-34]
-
Badii, Fojan
Effect of Ultrasound on Physicochemical Properties of Wheat Starch [Volume 27, Issue 1, 2014, Pages 23-15]
-
Badr, M.Kabiri
Polymer Properties and Theory of Scaling [Volume 6, Issue 1, 1993]
-
Badripour, M.
Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
-
Bafkar, Reza
An Overview on Synthesis and Functionalization of Mesoporous Silica and Its Application in Drug Delivery [Volume 29, Issue 3, 2016, Pages 201-229]
-
Baghban Salehi, Mahsa
Superabsorbent Sulfonated Polyacrylamide/Aluminum Nitrate Hydrogel: Swelling, Mechanical, Thermal and Structural Properties [Volume 30, Issue 5, 2018, Pages 419-433]
-
Baghban Salehi, Mahsa
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Bagheban Kochak, E.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Bagheri, M.
Structural Investigation of Macromolecules Using NMR Spectroscopy in Solution [Volume 8, Issue 3, 1995]
-
Bagheri, Massoumeh
Thermoresponsive Membrane Based on Thermotropic Liquid Crystalline Cholesteryl - (L-lacticacid)n System: Study of Its Drug Permeability [Volume 25, Issue 5, 2013, Pages 365-373]
-
Bagheri, R.
Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
-
Bagheri, Reza
Different Rols of Modified Organoclay in Deformation Mechanism Control of Polymeric Matrices [Volume 27, Issue 1, 2014, Pages 14-3]
-
Bagheri, Rohollah
Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
-
Bagheri, Rouhollah
Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
-
Bagheri, S.
Effect of Radio Frequency Plasma on Polystyrene Surface Properties [Volume 19, Issue 5, 2007]
-
Bagheri-Khoulenjani, S.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
-
Bagheri-Khoulenjani, S.
Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]
-
Bagheri-Khoulenjani, Shadab
Effects of Neutralization and Crosslinking Agents on the Morphology of Chitosan Electrospun Scaffolds [Volume 29, Issue 6, 2017, Pages 519-529]
-
Bagheri Marandi, G.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Bagheri Marandi, G.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Bagheri Marandi, Gholam
Alginate-based Hydrogel Nanocomposites Made by Carbon Nanotubes and Acrylamide/Itaconic acid as Co-monomers [Volume 24, Issue 5, 2012, Pages 413-423]
-
Bagheri Marandi, Gholam
Synthesis of Hydrogel Nanocomposites of Acrylamide-Itaconic Acid Using Laponite and Study of Crystal Violet Dye Adsorption [Volume 24, Issue 6, 2012, Pages 505-514]
-
Bagheri Marandi, Gholam
Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]
-
Bagheri Marandi, Gholam
Carrageenan-based Hydrogel Nanocomposites Prepared in Presence of Carbon Nanotubes and Their Adsorption
of Brilliant Green [Volume 28, Issue 6, 2016, Pages 528-517]
-
Bagherian Mahmoodabadi, Alireza
Properties of Nitrile Rubber/Clay Nanocomposites Prepared by In-Situ Emulsifier-free Emulsion Polymerization [Volume 28, Issue 3, 2015, Pages 242-233]
-
Baghersad, rasool
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
-
Baghersad, Somaye
Coating of Silk Fabric Using PVA/Ciprofloxacin Hcl Nanofibers for Biomedical Applications [Volume 29, Issue 2, 2016, Pages 171-184]
-
Baghi Neirizi, Elahe
Biodegradability Study of the Blend Film of High Density Polyethylene and Poly(lactic acid) Disposable Packages Flake [Volume 29, Issue 1, 2016, Pages 27-43]
-
Bahari Ardashiri, Sakkineh
Fabrication of Ultrasensitive Bio-Nanosensor Based on Polypyrrole/Graphene Nanocomposite [Volume 34, Issue 6, 2022, Pages 579-595]
-
Baharloui, Maryam
Synthesis of Hydrogel Nanocomposites of Acrylamide-Itaconic Acid Using Laponite and Study of Crystal Violet Dye Adsorption [Volume 24, Issue 6, 2012, Pages 505-514]
-
Baharvand, H.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Bahrami, Seyed Hajir
Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
-
Bahrami Panah, Niloufar
Effect of Sonification Time on Synthesisi and Corrosion Resistance of Epoxy-Clay Nanocomposite [Volume 29, Issue 4, 2016, Pages 335-346]
-
Bahramian, A.R.
Modelling the Degradation Process of Ablative Composites [Volume 16, Issue 5, 2004, Pages 313-318]
-
Bahramian, A.R.
Polymeric Composite Leaf Spring [Volume 15, Issue 5, 2003]
-
Bahramian, A.R.
Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
-
Bahramian, Ahmad Reza
Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
-
Bahramian, Ahmad Reza
Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]
-
Bahramian, Ahmad Reza
Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
-
Bahramian, Ahmad Reza
Evaluation of High Temperature Composites Thermal Properties under Different Heat Flux Conditions [Volume 27, Issue 2, 2014, Pages 160-151]
-
Bahramian, Ahmad Reza
The Effect of Graphite Nanoparticles on Thermal Stability and Ablation of Phenolic/Carbon Fiber/Graphite Nanocomposites [Volume 27, Issue 3, 2014, Pages 249-241]
-
Bahramian, Ahmad Reza
The Effect of Novolac and Graphite Polycrystal on the Acetone Penetration and Thermal Resistance of Nanocomposites Based on Nitrile Rubber [Volume 28, Issue 1, 2015, Pages 82-73]
-
Bahramian, Ahmad Reza
Thermal and Mechanical Properties of Novolac-Silica Hybrid Aerogels Prepared by Sol-Gel Polymerization in Solvent-Saturated Vapor Atmosphere [Volume 28, Issue 2, 2015, Pages 168-161]
-
Bahramian, Ahmad Reza
Kinetic Theory of Fracture Strength in Prediction of Fatigue Lifetime of Epoxy/Carbon Fiber Composites [Volume 29, Issue 5, 2017, Pages 429-441]
-
Bahramian, Ahmad Reza
Synthesis of Plate-Like Nanoalumina and Its Effect on Gas Permeability of Carbon Fiber Epoxy Composite [Volume 30, Issue 1, 2017, Pages 43-51]
-
Bahramian, Ahmad Reza
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
-
Bahramian, Ahmad Reza
Evaluation of Thermal Energy Storage of Phase Change Materials Based on Polyethylene Glycol Core and Thermal Conductive Polystyrene Shell for Heat Transfer Fluid Applications [Volume 36, Issue 3, 2023, Pages 307-320]
-
Bahramian, Ahmadreza
Improvement in Ablation and Thermal Properties of Ultra-lightweight Silicone/Cork Composites Insulator Using Novolac Aerogel [Volume 30, Issue 6, 2018, Pages 517-529]
-
Bahrani, Sajedeh
Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
-
Bahreyni, Ebrahim
Synergistic Effect of Intumescent Flame Retardant and Organically Modified Montmorillonite on Flame-Retardant and Foaming Properties of High Density Polyethylene/Walnut Shell Powder Biocomposites [Volume 30, Issue 4, 2017, Pages 299-310]
-
Bahri, A.H.
Continuous Injection Molding of Thermoplastic Structural Foam [Volume 16, Issue 2, 2003]
-
Bahri-Laleh, Naeimeh
MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
-
Bahri-Laleh, Naeimeh
The Use of Electron Donors to Increase Stereospecificity in Ziegler-Natta Propylene Polymerization [Volume 29, Issue 2, 2016, Pages 105-125]
-
Bahri-Laleh, Naeimeh
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Bairami Habashi, Ramin
Functional Groups and Structural Characterization of Unmodified and Functionalized Lignin by Titration, Elemental Analysis, 1H NMR and FTIR Techniques [Volume 30, Issue 5, 2018, Pages 405-418]
-
Bajelan, Danial
Biodegradable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Nanocomposite [Volume 36, Issue 1, 2023, Pages 87-101]
-
Bakeri, Gholamreza
Effect of Spinneret Dimension on Structure and Performance of Polyetherimide Hollow Fiber Membrane in Membrane Contactor [Volume 30, Issue 4, 2017, Pages 275-286]
-
Bakeri, Gholamreza
Modification and Performance Enhancement of PVC Ultrafiltration Membrane by Grafting of Sulfonated Polystyrene [Volume 33, Issue 3, 2020, Pages 243-254]
-
Bakeri, Gholamreza
Thin Film Polyamide Membranes Containing Modified Manganese Dioxide Nanotubes for Removal of Sodium and Copper Ions [Volume 34, Issue 2, 2021, Pages 155-172]
-
Bakeri, Gholamreza
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Bakeri Jafarkolaei, Gholamreza
Dehumidification of Gas Stream Using Nanostructured Polyetherimide Hollow Fiber Membrane in Membrane Contactor [Volume 32, Issue 5, 2020, Pages 373-384]
-
Bakeri Jafarkolaei, Gholamreza
Improvement in Polyamide Thin Film Nanofiltration Membrane Performance with Modified Titanium
Oxide Nanotubes [Volume 33, Issue 4, 2020, Pages 291-304]
-
Bakhshandeh, G.
Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
-
Bakhshandeh, G.R.
The Usage of Polymers in Ceramic Cores Manufacturing [Volume 7, Issue 3, 1994]
-
Bakhshandeh, G.R.
Study on the Adhesion of Cushion Gum to Carcass in Retreaded Tyre [Volume 13, Issue 4, 2000]
-
Bakhshandeh, G.R.
Studies on Peroxide Vulcanization and Mechanical Properties of Silica Filled EPDM in Presence of TAC Coupling Agent [Volume 15, Issue 6, 2003]
-
Bakhshandeh, G.R.
The Effect of Synthetic Rubber Blend and Carbon Black on Cushion Gum Adhesion in Retreaded Tires [Volume 16, Issue 4, 2003]
-
Bakhshandeh, G.R.
Effect of Different Coupling Agents on Mechanical Properties of Silica Filled Reinforced EPDM Rubber Compounds [Volume 16, Issue 6, 2004]
-
Bakhshandeh, G.R.
Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
-
Bakhshandeh, G.R.
Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
-
Bakhshandeh, G.R.
An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]
-
Bakhshandeh, G.R.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Bakhshandeh, G.R.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Bakhshandeh, G.R.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Bakhshandeh, GH.
A Parametric Study on Rubber to Steel-cord Adhesion for the Belt Section of Low Aspect Ratio Radial Passenger Car Tires [Volume 15, Issue 1, 2002]
-
Bakhshandeh, Gh.R.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Bakhshandeh, Gholam Reza
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Bakhshandeh, Gholam Reza
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Bakhshandeh, Gholam Reza
Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
-
Bakhshandeh, Golamreza
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Bakhtiari, P.
Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
-
Bakhtiari, S.
Investigation of Polyvinyl Chloride and Nitrile Rubber Blends [Volume 10, Issue 4, 1997]
-
Bakhtiari Ramezani, Mahdieh
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
-
Bakhtiary, S.
An Experimental Investigation on Fire Behavior of Expanded Polystyrene [Volume 20, Issue 3, 2007, Pages 235-245]
-
Bakhtiyari, S.
Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
-
Bali Eslami, Ali
Fabrication and Investigation of Polyamine Thin Film Composite Membrane based on Poly(2,5-benzimidazole) with High Chemical Stability [Volume 31, Issue 6, 2019, Pages 551-561]
-
Bandehali, Samaneh
Fabrication and Investigation of Separation
Performance and Antifouling Properties of Mixed Matrix PES-Based Nanofiltration Membrane Containing Cobalt-Ferrite Nanoparticles [Volume 33, Issue 5, 2021, Pages 385-400]
-
Bandehali, Samaneh
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
-
Banihashemi, A.
Aromatic Polyethers, Polysulphones, and Polyketones as Laminating Resins [Volume 4, Issue 3, 1991]
-
Banihashemi, A.
A New Conceptulization in Relation to Ionic Polymerization [Volume 10, Issue 2, 1997]
-
Banihashemi, A.
Synthesis and Characterization of Several New Poly(benzimidazole-co-urea)s [Volume 13, Issue 2, 2000]
-
Baqeri-Jagharq, M.
Intermediate Radical Termination Theory in Elucidation of RAFT Kinetics and Comparison to Experimental Data [Volume 21, Issue 6, 2009, Pages 503-513]
-
Barari, Mohammad
Synthesis and Characterization of Poly(vinyl acetate)-b-poly(dimethylsiloxane) Diblock Copolymer by Iodine Transfer Radical Polymerization [Volume 28, Issue 6, 2016, Pages 463-455]
-
Barati, Aboulfazl
Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
-
Barghamadi, Mohammad
Effect of Graphene Nanoplatelets on Rheology, Tensile Properties and Curing Behavior of Nanocomposites Based on NBR/PVC Blends Prepared by Melt Intercalation Method [Volume 31, Issue 3, 2018, Pages 289-301]
-
Barghamadi, Mohammad
Multiscale Modeling of Mechanical Properties of Green Tire Tread Compound [Volume 36, Issue 2, 2023, Pages 177-189]
-
Barikani, H.
Investigation on the Effect of Formulation and Process Variables of Polyethylene Foams Production [Volume 14, Issue 2, 2001]
-
Barikani, M.
Polyurethanes [Volume 1, Issue 1, 1988]
-
Barikani, M.
Polyurethanes (2) [Volume 1, Issue 2, 1988]
-
Barikani, M.
Thermal Stability of Polyurethane Elastomers (2) [Volume 2, Issue 2, 1989]
-
Barikani, M.
Honeycombs [Volume 4, Issue 1, 1991]
-
Barikani, M.
Kinetics of Polyurethane Polymerization Using Differential Scanning Calorimetry [Volume 4, Issue 3, 1991]
-
Barikani, M.
The Study of the Parametrs Affecting the Choice of Adhesive in Sandwich Panels and Honeycombs [Volume 4, Issue 4, 1991]
-
Barikani, M.
Preparation and Optimization of Nitrile-phenolic Structural Adhesives [Volume 5, Issue 1, 1992]
-
Barikani, M.
Kinetics of Polyurethane Polymerization Using Fourier Transform Infrared Spectrophotometry (FTIR) [Volume 5, Issue 2, 1992]
-
Barikani, M.
Preparation and Characterization of Polyurethane Orthopaedic Bandages [Volume 8, Issue 4, 1995]
-
Barikani, M.
Synthesis of Poly(p-phenyleneterephthalamide) for Producing Kevlar Super Fibers [Volume 10, Issue 3, 1997]
-
Barikani, M.
Effect of Styrene and Maleic Anhydride Content on Compressive Strength of TDI Modified Closed Cell Rigid Crosslinked PVC Foam [Volume 10, Issue 2, 1997]
-
Barikani, M.
Role of the Effective Factors on Laboratory Synthesis of Poly(p-phenylene terephthalamide) Fibers [Volume 11, Issue 2, 1998]
-
Barikani, M.
Preparation of Flexible Polyurethane of Large Cell Foam [Volume 15, Issue 5, 2003]
-
Barikani, M.
Studying and Analyzing the Effect of SBR Substitution by PU in Rubber Compounds Properties [Volume 15, Issue 5, 2003]
-
Barikani, M.
Synthesis and Characterization of Suitable Resole for Preparation of Phenolic Foam [Volume 16, Issue 5, 2004]
-
Barikani, M.
Studying the Effective Parameters on Preparation of Resole Used in Phenolic Foam [Volume 17, Issue 1, 2004]
-
Barikani, M.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
-
Barikani, M.
Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
-
Barikani, M.
Comparison between Properties of Polyurethane Nanocomposites Prepared by Two Different Methods [Volume 21, Issue 6, 2009, Pages 471-476]
-
Barikani, M.
Investigation of Mixing, Morphology and Mechanical Properties of Polyethylene/Starch/Polycaprolactone Compounds [Volume 18, Issue 3, 2005, Pages 181-190]
-
Barikani, M.
Nanoclay Dispersion and its Effect on Properties of Waterborne Polyurethanes [Volume 26, Issue 5, 2014, Pages 401-393]
-
Barikani, Mehdi
Effect of Fire Retardants in Improvement of Combustion Restriction and Thermal Decomposition of Polyurethane Foams: A Review [Volume 24, Issue 1, 2011, Pages 3-31]
-
Barikani, Mehdi
Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
-
Barikani, Mehdi
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Barikani, Mehdi
Polyurethane Nanocomposites Based on Layered
Double Hydroxides: A Review on Their Syntheses
and Applications [Volume 33, Issue 5, 2021, Pages 369-384]
-
Barikani*, Mehdi
Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
-
Barmar, M.
Synthesis of Thermoplastic Polyurethane Elastomers and Effect of Structural Parameters on Their Properties [Volume 7, Issue 2, 1994]
-
Barmar, M.
Preparation of Flexible Polyurethane of Large Cell Foam [Volume 15, Issue 5, 2003]
-
Barmar, M.
Study of Association Behavior in Step Growth HEUR Aqueous Solutions [Volume 16, Issue 6, 2004]
-
Barmar, M.
Comparison between Properties of Polyurethane Nanocomposites Prepared by Two Different Methods [Volume 21, Issue 6, 2009, Pages 471-476]
-
Barmar, Mohammad
Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
-
Barmar, Mohammad
The Effect of Process Parameters on the Synthesis of Thermoplastic Polyurethane Elastomer Through Reactive Melt Blending [Volume 33, Issue 1, 2020, Pages 41-49]
-
Barzegari, M.R.
Bitumen Modification via PS/PB Blend [Volume 16, Issue 5, 2004, Pages 303-311]
-
Barzegari, M.R.
Bitumen Modification via PS/PB Blend [Volume 16, Issue 5, 2004, Pages 303-311]
-
Barzegarzadeh, Mehdi
Magnetic Graphene Quantum Dot/Chitosan Bionanocomposite Hydrogel Beads for Drug Delivery System: Synthesis and Application [Volume 36, Issue 4, 2024, Pages 409-420]
-
Barzin, J.
Preparation of Silane Grafting and Crosslinking of Polyethylene: Studies of the Factors Affecting the Grafting and Crosslinking Processes [Volume 11, Issue 1, 1998]
-
Barzin, J.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
-
Barzin, J.
Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
-
Barzin, Jalal
Fabrication of Polyethersulfone-Based Symmetric Membrane by Applying Pause Stage in Coagulation [Volume 28, Issue 5, 2015, Pages 436-421]
-
Baseri, S.
Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]
-
Basiri, Laleh
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Basiri, Mona
Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
-
Bastani, Saeed
Effect of Hyperbranched Polymers on Curing Behavior of UV Curable Inks in Inkjet Printing [Volume 29, Issue 3, 2016, Pages 276-285]
-
Bayat, Mohammad
Optimization of Factors Affecting the Synthesis of Polypropylene Glycol/Polyglycidyl Nitrate/
Polypropylene Glycol Triblock Copolymer and
Evaluation of Its Thermal Properties [Volume 33, Issue 1, 2020, Pages 63-73]
-
Bayat, Yadollah
Optimization of Factors Affecting the Synthesis of Polypropylene Glycol/Polyglycidyl Nitrate/
Polypropylene Glycol Triblock Copolymer and
Evaluation of Its Thermal Properties [Volume 33, Issue 1, 2020, Pages 63-73]
-
Bazaz, A.
Synthesis of a Triblock Nonionic Copolymer Poly(ricineoleic acid-b-ethyleneglycol-b-ricineoleic acid) and Investigation of
the Stability of Its Associated Water/Oil Emulsion [Volume 21, Issue 6, 2009, Pages 457-464]
-
Bazaz, Abdol Karim
Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
-
Bazgir, Saeed
Effect of Type and Amount of Accelerator on Reactivity and Curing Behavior of Epoxy/Dicyandiamide/Accelerator System [Volume 33, Issue 4, 2020, Pages 329-338]
-
Bazgir, Saeid
Preparation of a Latent Accelerator for Hot Curing of Epoxy Resin and Study of Its Effect on Mechanical Properties of Carbon Fiber Epoxy Composites [Volume 36, Issue 2, 2023, Pages 133-149]
-
Beagom Mokhtari-Hosseini, Z.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Behbahani, G.Rezaei
Investigations on Effect of Heat and Humidity on Polyurea and Gelatin Microcapsules [Volume 14, Issue 3, 2001]
-
Behboudi, Ali
Study on the Impact of Coagulation Bath Temperature on the Surface Morphology and Performance of Polyethylene Membrane Prepared by TIPS Method in Purification of Collagen Protein [Volume 28, Issue 5, 2015, Pages 407-395]
-
Beheshty, M.H.
Silane Coupling Agents Effects on Reinforced Phenolic Molding Compounds [Volume 7, Issue 2, 1994]
-
Beheshty, M.H.
Determination of Injection Port and Vent Locations of Hollow Tubes by RTM-Experimental and Computer Simulation [Volume 13, Issue 4, 2000]
-
Beheshty, M.H.
The Compounding of Phenolic Nitrile Blends: I-Effect of Phenolic Resin [Volume 14, Issue 5, 2002]
-
Beheshty, M.H.
The Compounding of Phenolic Nitrile Blends: II-Effect of Nitrile Elastomer Type [Volume 14, Issue 5, 2002]
-
Beheshty, M.H.
Study of the Effect of Core-Twist Hybrid Yarn Glass/PET on Mechanical Properties of Unsaturated Polyester Resin [Volume 16, Issue 1, 2003]
-
Beheshty, M.H.
Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]
-
Beheshty, M.H.
Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]
-
Beheshty, M.H.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Beheshty, M.H.
Study of Room Temperature Curing of Phenolic Resin and Its Silica Reinforced Composites [Volume 21, Issue 2, 2008, Pages 149-155]
-
Beheshty, M.H.
Studying Room Temperature Curing of Phenolic Resin and their Composites [Volume 20, Issue 4, 2007, Pages 331-336]
-
Beheshty, M.H.
The Effect of Co-cure and Counter Cure Methods on the Properties of
Phenolic Sandwich Structures [Volume 18, Issue 3, 2005, Pages 151-157]
-
Beheshty, Mohamad Hosain
Effect of Type and Amount of Accelerator on Reactivity and Curing Behavior of Epoxy/Dicyandiamide/Accelerator System [Volume 33, Issue 4, 2020, Pages 329-338]
-
Beheshty, Mohammad Hosain
A Comparative Study on the Thermal Resistance, Flammability and Mechanical Properties of Unsaturated Polyester and Epoxy Resins [Volume 28, Issue 5, 2015, Pages 419-409]
-
Beheshty, Mohammad Hosain
Thermally-Latent Curing Agents for Epoxy Resins:
A Review [Volume 31, Issue 5, 2019, Pages 409-426]
-
Beheshty, Mohammad Hosain
An Experimental Study on Flexural Properties of Jute Fiber/Aluminum Laminates [Volume 33, Issue 4, 2020, Pages 351-362]
-
Beheshty, Mohammad Hosain
Flame Retardant Compounds for Epoxy Resins: A Review [Volume 34, Issue 1, 2021, Pages 3-27]
-
Beheshty, Mohammad Hosain
Effect of crosslinking agent on the two component acrylic structural adhesive based on methyl methacrylate [Volume 34, Issue 6, 2022, Pages 569-578]
-
Beheshty, Mohammad Hosain
Preparation of a Latent Accelerator for Hot Curing of Epoxy Resin and Study of Its Effect on Mechanical Properties of Carbon Fiber Epoxy Composites [Volume 36, Issue 2, 2023, Pages 133-149]
-
Beheshty, Mohammad Hosain
Unsaturated Polyester Resin Nanocomposites: An Overview [Volume 36, Issue 4, 2024, Pages 327-363]
-
Beheshty, mohammad hossein
Nano Clay Effect on Morphology, Mechanical Properties and Water Absorption of Vinyl Ester-Based Nanocomposites [Volume 24, Issue 2, 2011, Pages 83-92]
-
Behnamghader, A.A.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Behrooz, Rabi
The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
-
Behzadnasab, Morteza
Synthesis Methods of In Situ Forming Injectable
Hydrogels and Their Applications in Tissue
Engineering: A Review [Volume 33, Issue 2, 2020, Pages 95-113]
-
Beig Zadeh, A.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Beigi Boroujeny, Saeed
Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
-
Bertoli, Luca
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Beteshobabrud, R.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
-
Bigdeli, Poorya
Compositional Determination of Vinyl Acetate/Vinyl Benzoate Copolymer by Fourier Transform Infrared Spectroscopy [Volume 27, Issue 6, 2015, Pages 422-413]
-
Boddohi, Soheil
Preparation of Hyaluronic acid-Aloevera Nanoparticles for Sustained Delivery of Doxycycline [Volume 31, Issue 6, 2019, Pages 539-550]
-
Boddohi, Soheil
Preparation and Investigation of Gum Tragacanth/Gelatin Nanofibers for Antibacterial Drug Delivery Systems [Volume 32, Issue 2, 2019, Pages 145-155]
-
Boohendi, H.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Boohendi, H.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Booth, C.
Preparation of Polymer Electrolytes Based on Copoly(ethylene oxide-propyleneoxide)/Li Salts [Volume 5, Issue 2, 1992]
-
Bordbar, Mohammad Saleh
Dispersion of Glycidyl POSS-modified Silica Nanoparticles in Epoxy [Volume 34, Issue 2, 2021, Pages 131-142]
-
Borhani, J.
Effect of Microwave Heating on the Fine Structure of Polyester Filaments [Volume 15, Issue 4, 2002]
-
Borhani, S.
Alkaline Hydrolysis of Polyester Fabrics in Alcoholic Sodium Hyroxide Solution [Volume 13, Issue 3, 2000]
-
Borhani, S.
Effect of Microwave Heating on the Fine Structure of Polyester Filaments [Volume 15, Issue 4, 2002]
-
Borhani, S.
Evaluation of Surface Roughness of Polyacrylonitrile Nanowebs [Volume 21, Issue 1, 2008, Pages 61-69]
-
Borhani, S.
Study of Low Pressure Cold Plasma on Moisture Properties of Polyester Fabric [Volume 20, Issue 2, 2007, Pages 155-163]
-
Bouhendi, Hossein
The Effect of Double Crosslinker on Precipitation Polymerization of Poly(acrylic acid) [Volume 27, Issue 2, 2014, Pages 150-143]
-
Bouhendi, Hossein
Conversion of Lignocellulosic Bagasse Biomass into Hydrogel [Volume 29, Issue 5, 2017, Pages 455-467]
-
Bouhendi, Hossein
Modification of Rice Husk with Glycidyl Crosslined Microgel Latex for Preparation of Hybrid Hydrogel [Volume 31, Issue 2, 2018, Pages 129-141]
-
Bouhendi, Hossein
Kinetic Studies of Poly(ethylene terephthalate)
Aminolysis Process without Catalyst [Volume 33, Issue 5, 2021, Pages 435-443]
-
Bouhendi, Hossein
Kinetic Studies of Poly(ethylene terephthalate)
Aminolysis Process without Catalyst [Volume 33, Issue 5, 2021, Pages 435-443]
-
Bouhendi, Hossein
Synthesis and Functionalization of α-Olefines (6 and 10 Carbons)/Maleic Anhydride Comb-like Copolymers and Their Application in Silica Nanohybrid and Hydrogel [Volume 33, Issue 6, 2021, Pages 537-551]
-
Bouhendi, Hossein
Superabsorbent Microparticles for Production of Concrete Using Ultrasound: A Performance Study [Volume 36, Issue 1, 2023, Pages 61-72]
-
Bouhnedi, Hossien
Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications [Volume 33, Issue 6, 2021, Pages 525-535]
-
Bousmina, Mosto
Online Morphology Development of Immiscible Polymer Blends in the Presence of an Interfacial Modifier [Volume 29, Issue 6, 2017, Pages 571-582]
-
Bozorg, Mojtaba
Effects of Molecular Iodine and 4-tert-Butylcatechol Radical Inhibitor on the Radical Polymerization of Styrene [Volume 30, Issue 2, 2017, Pages 95-104]
-
Buohendi, Hossien
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
-
Burford, R.P.
Surface Modification of EPR as Biomaterial by Laser Induced Graft Copolymerization of AAm, HEMA and NVP: II- HEMA and NVP [Volume 7, Issue 3, 1994]
C
-
Chaharmahali, M.
The Effects of Filler Content and Water Absorption on Creep Behavior of HDPE Waste/MDF Flour Composites [Volume 21, Issue 1, 2008, Pages 53-59]
-
Chaharmahali, M.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
-
Chavooshi, Arash
Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
-
Chenar, M.Pourafshari
Fabrication of Polysulfone Hollow Fiber Membrane and Effects of Solvent and Air-gap on its Morphology [Volume 19, Issue 6, 2007]
D
-
Dabbaghi, Alaleh
Biobased Acids in Production of Hybrid Superabsorbent Polymer Hydrogels: A Review [Volume 34, Issue 3, 2021, Pages 207-231]
-
Dabir, B.
The Effect of a Number of Selective Points in Modelling of Polymerization Reaction by Monte Carlo Method: Studying the Initiation Reaction [Volume 15, Issue 5, 2003]
-
Dabiri, H.
Styrene [Volume 1, Issue 1, 1988]
-
Dabiri, H.
Styrene (2) [Volume 1, Issue 2, 1988]
-
Dabiri, H.
Styrene (3) [Volume 2, Issue 1, 1989]
-
Dabiri, H.
Styrene (4) [Volume 2, Issue 3, 1989]
-
Dabiri, H.E.
Polycarbonates: Synthetic Methods and Applications [Volume 7, Issue 3, 1994]
-
Dabirian, F.
Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
-
Dabirian, F.
Production and Some Characteristics of Bulk Nanofibers Layers by Manipulation of Electrospinning System [Volume 21, Issue 4, 2008, Pages 307-313]
-
Dabirian, Farzad
Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
-
Dabirian, Farzad
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
-
Dadashi, Parsa
A New Modified Emulsion Model for Immiscible
Binary Polymeric Blends Containing Nanoparticles Distributed in Droplets [Volume 34, Issue 1, 2021, Pages 81-92]
-
Dadashi, Saeed
Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
-
Dadbin, S.
Synthesis and Study of Poly(HEMA-co-NVP) Hydrogels for Contact Lens Applications [Volume 12, Issue 1, 1999]
-
Dadbin, S.
Synthesis of PVC Organosol Lacquers for Internal Metal Can Coatings [Volume 12, Issue 2, 1999]
-
Dadkhah, Arezo
Synthesis of Poly(para-phenylene terephthalamide) and Preparation of Short Fibers: Effect of Sodium Sulphate on the Fibers [Volume 24, Issue 2, 2011, Pages 113-120]
-
Dadras Madani, A.
Doping of Electrically Conducting Polymers [Volume 5, Issue 3, 1992]
-
Dadsetan, M.
Evaluation of the Excimer and CO2 Laser Effects on the Surface Properties of Polyethylene Terephthalate [Volume 12, Issue 1, 1999]
-
Daemi, Hamed
Variations in Calcium and Alginate Ions Concentration in Relation to the Properties of Calcium Alginate Nanoparticles [Volume 26, Issue 1, 2013, Pages 25-32]
-
Daemi, Hamed
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Daemi, Hamed
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Damavandi, Saman
Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
-
Danaee, Iman
Effect of Sonification Time on Synthesisi and Corrosion Resistance of Epoxy-Clay Nanocomposite [Volume 29, Issue 4, 2016, Pages 335-346]
-
Daneshgar, Ali
The Effect of non-Newtonian Behavior of Fluid on the Tubular Reactor Performance and Studying Different Variables in Relation to the Degree of Conversion [Volume 27, Issue 6, 2015, Pages 436-423]
-
Daneshgar, M.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
-
Daneshian, Hanieh ,
Physicomechanical Properties, Release Behavior and Cell Proliferation of PVA/Agar/PEG Hydrogel Containing Aloe Vera [Volume 34, Issue 1, 2021, Pages 69-80]
-
Daneshmand, Hamid
Evaluation of Polymer Wettability Alteration and Adsorption of Modified Silica Nanoparticles for Enhanced Oil Recovery [Volume 33, Issue 3, 2020, Pages 272-285]
-
Daraei Nejad, Zohreh
Conductive Nanofibrous Scaffolds for Tissue Engineering Applications: A Review [Volume 32, Issue 3, 2019, Pages 189-210]
-
Dareh, Maryam
Effect of Type and Amount of Accelerator on Reactivity and Curing Behavior of Epoxy/Dicyandiamide/Accelerator System [Volume 33, Issue 4, 2020, Pages 329-338]
-
Darestani Farahani, H.
Ring-opening Bulk-melt Polymerization of Poly(L-lactide) [Volume 16, Issue 4, 2003]
-
Darestani Farahani, T.
Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
-
Darestani Farahani, T.
Investigation on Improvement of Natural Rubber/Reclaimed Rubber Blend Properties Using Coupling Agents [Volume 19, Issue 3, 2006]
-
Darestani Farahani, T.
An Investigation on the Effect of Reclaimed Rubber on Viscoelastic Properties and Rheology of Natural Rubber [Volume 19, Issue 4, 2006]
-
Dargahi, Maryam
Nanomagnetic Hydrogels Based on Carboxymethylcellulose/Diatomaceous Earth Grafted with Acrylamide for Adsorption of Cationic Crystal Violet Dye [Volume 31, Issue 2, 2018, Pages 171-185]
-
Dariushi, S.
An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]
-
Dariushi, Soheil
Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
-
Dariushi, Soheil
Analytical/Empirical Study on Indentation Behavior of Sandwich Plate with Foam Core and Composite Face Sheets [Volume 30, Issue 3, 2017, Pages 235-245]
-
Dariushi, Soheil
An Experimental Study on Flexural Properties of Jute Fiber/Aluminum Laminates [Volume 33, Issue 4, 2020, Pages 351-362]
-
Daroonkala, M.R.Rostami
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization (Part III): Effect of Scale up and Heat Generation Comparison [Volume 17, Issue 3, 2004]
-
Darushi, S.
An Experimental Study on Impact Behavior of Fiber/Metal Laminates [Volume 21, Issue 4, 2008, Pages 315-327]
-
Dashti, A.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Dashti, Ali
1-Hexene Polymerization Using Ziegler-Natta Catalytic System with Response Surface Methodology [Volume 30, Issue 3, 2017, Pages 197-206]
-
Dashti, Ali
Pyrolysis of Bioplastics Based on Bovine Gelatin-Potato Flour and Whey Protein-Potato Flour Blends and Their
Kinetics and Thermodynamic Analysis [Volume 31, Issue 6, 2019, Pages 575-592]
-
Davachi, S. Mohammad
Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]
-
Davar, Fatemeh
Modification of Structural Properties of Nanocomposite Membranes for Improving Dye Separation from Textile Effluents [Volume 31, Issue 5, 2019, Pages 475-492]
-
Davari, G.
Study on Mucoadhesion Properties of Chitosan [Volume 20, Issue 6, 2008, Pages 515-519]
-
Dehaki, H.Rajabi
Study of the Dispersion Quality of Pigment in Color Masterbatches with the Use of Image Analysis [Volume 17, Issue 2, 2004]
-
Dehghan-Niri, Maryam
Electron Beam-Irradiated Crosslinked Hydrogel Scaffold form Natural and Synthetic Polymers:
Synthesis and Characterization [Volume 36, Issue 1, 2023, Pages 47-60]
-
Dehghannia, Jalal
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Dehghannia, Jalal
Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
-
Dehghannia, Jalal
Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
-
Dehghannya, Jalal
Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
-
Dehghannya, Jalal
Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
-
Dehghannya, Jalal
Plasticized Starch Based Bionanocomposites Containing Cellulose Nanowhiskers and Titanium Dioxide Nanoparticles: Study of Structure and Water Vapor Permeability [Volume 27, Issue 3, 2014, Pages 192-179]
-
Derakhshan fard, Fahime
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Didehban, Khadijeh
Polymer Hydrogels Based on Acrylic Acid and Acrylamide and Their Applications to Remove Cationic Dye of Basic Red 46 (BR 46) from Aqueous Solutions [Volume 31, Issue 1, 2018, Pages 27-41]
-
Dolatshahi, Hamid
Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
-
Doniavi, Ali
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Doosti Telgerd, Mehdi
Fabrication of Polyacrylonitrile-Polyoxomolybdate Composite Nanofibers Membrane as a Protective Layer in Protective Textiles by Electrospinning [Volume 33, Issue 4, 2020, Pages 305-314]
-
Dorfeshan, Masoud
Optimization of Effective Parameters in Fabrication of PVC Flat Sheet Membranes by Response Surface Method for Application in Humic Acid Separation [Volume 36, Issue 4, 2024, Pages 421-435]
-
Dorfeshan, Masoud
Two-way facilitated transport membrane for CO2 separation with synergy of nucleophilic addition and π-complexing reactions: Molecular simulation and experimental study [(Articles in Press)]
-
Dorosti, Fatereh
CO2/CH4 Separation by a Mixed Matrix Membrane of Polymethylpentyne/MIL-53 Particles [Volume 27, Issue 4, 2014, Pages 351-337]
-
Dorosti, Fatereh
Effect of Amine-Functionalized MIL-53 Metal Organic Frameworks on the Performance of Poly(4-methyl-1-pentyne) Membrane in CO2/CH4 Separation Gas Mixture [Volume 28, Issue 2, 2015, Pages 147-131]
-
Dorosti, Fatereh
Fabrication Parameters of Asymmetric Mixed Matrix Matrimid-MIL-53/PMHS Membrane for CO2/CH4 Separation [Volume 30, Issue 1, 2017, Pages 63-73]
-
Dorreh, S.
Mixing in Polymerization Processes (I) [Volume 5, Issue 1, 1992]
-
Doustkhah, K.
Studying Room Temperature Curing of Phenolic Resin and their Composites [Volume 20, Issue 4, 2007, Pages 331-336]
-
Dujhampanah, H.
Redox Copolymerization of 2VP-MMA by BPO-V(acac)3 System in 2-Butanone as Solvent and the Determination of Monomers Reactivity Ratios [Volume 8, Issue 1, 1995]
-
Dustgani, A.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
-
Duvurun, S.
Application of Polymers in New Drug Delivery Systems [Volume 6, Issue 4, 1993]
E
-
E.,
Studies on the Effect of Different Systems of Dynamic Vulcanization on the Mechanical Properties of Natural Rubber/Polypropylene Thermoplastic Elastomers [Volume 12, Issue 4, 1999]
-
E., M.
Ablation Mechanism of Organic Polymers Using UV and IR Lasers [Volume 8, Issue 3, 1995]
-
E., P.
Ablation Mechanism of Organic Polymers Using UV and IR Lasers [Volume 8, Issue 3, 1995]
-
E. Mallakpour, S.
Synthesis of Aliphatic Polyamides Containing 4-(4-Benzophenone)Urazole Linkages [Volume 11, Issue 3, 1998]
-
Ebadi, A.
X-Ray and Its Role in O[timization of Functioning Parameters of Polymer Processing [Volume 10, Issue 1, 1997]
-
Ebadi, H.
Morphology and Rheological, Thermal and Thermomechanical Properties of PP/PET Blends [Volume 16, Issue 6, 2004]
-
Ebadi, zeinab
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Ebadi Amooghin, A.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Ebadi Amooghin, Abtin
DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
-
Ebadi Amooghin, Abtin
Modification of Poly(ether-b-amide) Membrane Properties Using Glycerol for CO2/N2 Gas Separation [Volume 31, Issue 5, 2019, Pages 461-474]
-
Ebadirad, Ali
Effect of crosslinking agent on the two component acrylic structural adhesive based on methyl methacrylate [Volume 34, Issue 6, 2022, Pages 569-578]
-
Ebadzadeh, T.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Ebrahimi, Gh.
A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
-
Ebrahimi, Gh.
Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
-
Ebrahimi, Gh.
Improvement in Mechanical Properties of Cellulose Fibers-Thermoplastic
Polymer Composites [Volume 18, Issue 3, 2005, Pages 143-150]
-
Ebrahimi, Ghanbar
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Ebrahimi, Hamidreza
Preparation of Thermally-Resistant Nanohybrids Based on Novolac and Epoxy Resins and Epoxidized Carbon Nanotubes [Volume 31, Issue 4, 2018, Pages 373-383]
-
Ebrahimi, M.
Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
-
Ebrahimi, M.R.
Study of the Thickening Behavior and the Mechanical Properties of Sheet Molding Compound Prepared by Alkaline, Isocyanate and Dual Thickening Methods [Volume 16, Issue 6, 2004]
-
Ebrahimi, Mohammad
Fabrication and Investigation of Separation
Performance and Antifouling Properties of Mixed Matrix PES-Based Nanofiltration Membrane Containing Cobalt-Ferrite Nanoparticles [Volume 33, Issue 5, 2021, Pages 385-400]
-
Ebrahimi, morteza
Mechanical and Anti-bacterial Properties of Dental Adhesive Containing Diamond Nanoparticles [Volume 24, Issue 2, 2011, Pages 121-131]
-
Ebrahimi, N.Golshan
Investigation of Compatibility and Properties of Polyvinyl Chloride/Ester- based Polyurethane Blends [Volume 20, Issue 1, 2007]
-
Ebrahimi, N.Golshan
Polymer Fibers Production from Blend of Recycled PET Bottles and PP [Volume 20, Issue 1, 2007]
-
Ebrahimi, Rajabali
Study of Loading and Releasing of Fluvoxamine in Hydrogels Prepared by Ultrasound Irradiation [Volume 28, Issue 3, 2015, Pages 232-225]
-
Ebrahimi, S.A.
Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]
-
Ebrahimian1, E.
Preparation and Properties of PP/PET Blend [Volume 12, Issue 3, 1999]
-
Ebrahimzade, Amin
High-Speed Melt Spinnability, Structural and Physical Properties of a Low Melting Copolyester Multifilament Yarn [Volume 36, Issue 5, 2023, Pages 521-537]
-
Eghbali, Hadis
Chitosan-Vanillin-Montmorillonite Composite Hydrogel: Preparation and Mechanical Properties [Volume 34, Issue 6, 2022, Pages 547-556]
-
Ehsani, M.
Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
-
Ehsani, M.
Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
-
Ehsani, Morteza
Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
-
Ehsani, Morteza
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ehsani, Sadegh
Effect of Liquid Waste Polysulfide and Nanoclay on Engineering Properties of Bitumen [Volume 30, Issue 3, 2017, Pages 255-268]
-
Ehsani-zonuz, Javad
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
-
Ehsani Namin, P.
Investigating the Effect of Wood Particle Size on the Rheology and Physical-Mechanical Properties of
Wood-Polypropylene Composite [Volume 21, Issue 1, 2008, Pages 45-52]
-
Ehsani Namin, Parvin
Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene)/ Modified Thermoplastic Starch Blends [Volume 29, Issue 4, 2016, Pages 311-321]
-
Ehsani Namin, Parvin
Shear-Induced Crystallization of Poly(lactic acid)/Graphene Nanocomposite [Volume 29, Issue 5, 2017, Pages 415-427]
-
Ehsani Namin, Parvin
Functionalization of Graphene Nanoplatelet and the Shape Memory Properties of Nanocomposite Based on Thermoplastic Elastomer Polyurethane/Poly(vinyl chloride)/Graphene Nanoplateletes [Volume 30, Issue 4, 2017, Pages 287-297]
-
Ehsani Namin, Parvin
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ehsani Namin, Parvin
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
-
Ehsani Namin, Parvin
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Ehsani Sohi, Delara
Superabsorbent Sulfonated Polyacrylamide/Aluminum Nitrate Hydrogel: Swelling, Mechanical, Thermal and Structural Properties [Volume 30, Issue 5, 2018, Pages 419-433]
-
Eigel, F.
Effect of Various Factors on Mobility of Inner Layers to Outer Layers of Polypropylene in Two-Component Injection Moulding Machines [Volume 9, Issue 2, 1996]
-
Eikani, M.H.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
-
Eisazadeh, H.
Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Polypyrrole Polypyrrole [Volume 10, Issue 2, 1997]
-
Eisazadeh, H.
Influence of Stabilizers on the Electroactivity and Morphology of Polypyrrole Film [Volume 10, Issue 3, 1997]
-
Eisazadeh, H.
Investigating the Characteristics of Polyaniline and its Composite Films Prepared by Chemical Method [Volume 18, Issue 4, 2005, Pages 203-209]
-
Eisazadeh, Hossein
Colloidal Preparation of Polyaniline-Poly(vinyl alcohol) - SiO2 Nanocomposite and Study of its Anti-corrosive Properties [Volume 28, Issue 1, 2015, Pages 46-39]
-
Eliassi, A.
A Review on Experimental Methods and Applications for Measurement of Thermodynamic Properties of Polymer Solutions [Volume 6, Issue 4, 1993]
-
Elyasi Kojabad, Mahdi
Two-way facilitated transport membrane for CO2 separation with synergy of nucleophilic addition and π-complexing reactions: Molecular simulation and experimental study [(Articles in Press)]
-
Emam D-Jomeh, Zahra
Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
-
Emami, M.
Azeotropic Styrene-acrylonitrile Suspension Polymerization at Atmospheric Pressure [Volume 15, Issue 6, 2003]
-
Emami, M.
Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
-
Emami, M.
Preparation of Silicious Mesoporous Spherical and Rod- Like MCM-41 Using Cetyltrimethylammonium Bromide
as the Structure Directing Agent [Volume 21, Issue 3, 2008, Pages 243-250]
-
Emami, M.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Enayati, A.A.
Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
-
Enayati, M.S.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
-
Enhessari, M.
Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
-
Entezam, Mahdi
Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]
-
Entezam, Mahdi
Physicomechanical Properties, Release Behavior and Cell Proliferation of PVA/Agar/PEG Hydrogel Containing Aloe Vera [Volume 34, Issue 1, 2021, Pages 69-80]
-
Entezami, A.
Chemical Synthesis of Conducting Polythiophene [Volume 3, Issue 3, 1990]
-
Entezami, A.
Soliton, Polaron and Biopolaron in Conducting Polymers [Volume 4, Issue 4, 1991]
-
Entezami, A.
Infuence of Electrochemical Protonation and Doping on the Electrical Conductivity of BasicPolyaniline [Volume 6, Issue 4, 1993]
-
Entezami, A.
Living Polymeric Systems: Design and Applications [Volume 8, Issue 1, 1995]
-
Entezami, A. A.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Entezami, A.A.
The Study of Transformation Products of Some Sulfur Containing Phenolic Antioxidants During Oxidative Inhibition Reaction [Volume 5, Issue 1, 1992]
-
Entezami, A.A.
Electropolymerization of Thiophenes and Some of its Derivatives [Volume 5, Issue 3, 1992]
-
Entezami, A.A.
Coating Some Synthetic Fibers by Polyaniline to Improve Conductivity [Volume 10, Issue 1, 1997]
-
Entezami, A.A.
A Review on Conducting Polyfurans Synthesis, Properties and Their Applications [Volume 10, Issue 3, 1997]
-
Entezami, A.A.
Modification of Polyphenol - formaldehydes by Some Natural Oils [Volume 16, Issue 3, 2003]
-
Entezami, A.A.
Studies on the Doping of Polyaniline with Organic Acids by UV-Vis Spectroscopy [Volume 17, Issue 1, 2004]
-
Entezami, A.A.
Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing
Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
-
Entezami, A.A.
Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
-
Entezami, A.A.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
-
Entezami, Ali Akbar
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
-
Entezami, Ali Akbar
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Entezami, Ali Akbar
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Entezami, Ali Akbar
Plasticized Starch Based Bionanocomposites Containing Cellulose Nanowhiskers and Titanium Dioxide Nanoparticles: Study of Structure and Water Vapor Permeability [Volume 27, Issue 3, 2014, Pages 192-179]
-
Entezami, E.
Preparation of Cross-linked Copolymers Using Triblock and Diblock Copolymers Containing TEMPO End Groups [Volume 16, Issue 1, 2003]
-
Entezumi, A.
Application of Polymers in New Drug Delivery Systems [Volume 6, Issue 4, 1993]
-
Erfan-Niya, Hamid
In situ gelling hydrogels based on biodegradable polymers for effective ocular drug delivery: A review [(Articles in Press)]
-
Erfanian, Mohamad Reza
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Ershad, A.
Study of Viscoelastic Behavior of Bitumen-Polyethylene Blends [Volume 16, Issue 5, 2004]
-
Ershad, Amir
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Ershad-Langroudi, Amir
A Survey on Applications of Nanomaterials for Conservation of Artworks [Volume 30, Issue 5, 2018, Pages 371-389]
-
Ershad-Langroudi, Amir
Effects of Adding Nanosilica on Acrylic and Siloxane Hydrophobic Coatings to Protect Calcite Stones [Volume 32, Issue 1, 2019, Pages 15-29]
-
Ershad Langroodi, A.
Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]
-
Ershad Langroudi, Amir
Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
-
Es-haghi, Hajar
The Effect of Double Crosslinker on Precipitation Polymerization of Poly(acrylic acid) [Volume 27, Issue 2, 2014, Pages 150-143]
-
Es-Haghi, Hajar
Effect of Surface Roughness on the Rheology of Silica-Coated Styrene/Acrylic Acid Copolymer Suspensions [Volume 36, Issue 3, 2023, Pages 295-306]
-
Esfahani, M.Zarebini
Effect of Drying Temperature of Polyester Chips on the Properties of Partially Oriented Yarn [Volume 17, Issue 4, 2004]
-
Esfahanian, M.
A Generic Model for Prediction of Separation Performance of Olefin/Paraffin Mixture by Glassy Polymer Membranes [Volume 20, Issue 6, 2008, Pages 575-588]
-
Esfandeh, M.
Investigation of Factors ِِِAffecting the Surface Quality of Pultruded Profiles [Volume 15, Issue 4, 2002]
-
Esfandeh, M.
Study of the Thickening Behavior and the Mechanical Properties of Sheet Molding Compound Prepared by Alkaline, Isocyanate and Dual Thickening Methods [Volume 16, Issue 6, 2004]
-
Esfandeh, M.
Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
-
Esfandeh, M.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Esfandeh, M.
Study of Room Temperature Curing of Phenolic Resin and Its Silica Reinforced Composites [Volume 21, Issue 2, 2008, Pages 149-155]
-
Esfandeh, M.
Modelling of the Indentation Behaviour of Thermoplastic Honeycomb Sandwich Panels [Volume 21, Issue 2, 2008, Pages 157-166]
-
Esfandeh, M.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Esfandeh, M.
Application of Silane Compounds for Improving Adhesion of a Silicone
Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
-
Esfandeh, Masoud
Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
-
Eshagh, Sahar
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Eshaghi, H.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Eskandari, M.
Morphology Control in Cellulose Acetate Membrane [Volume 11, Issue 4, 1998]
-
Eskandari, Maryam
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
-
Eskandari, Zohreh
Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
-
Eskandari Sedighi, R.
Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]
-
Eskandarnejad, S.
Study of the Effect of Core-Twist Hybrid Yarn Glass/PET on Mechanical Properties of Unsaturated Polyester Resin [Volume 16, Issue 1, 2003]
-
Eslami, H.
Investigation on a Rheological Model for Miscible Polymer Blends and Its Evaluation with Experimental Data [Volume 14, Issue 6, 2002]
-
Eslami, H.
Study on the Dynamic Rheological Behavior of Polyethylene Filled with Carbon Black [Volume 16, Issue 4, 2003]
-
Eslami, Y.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Eslami, Zahra
Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]
-
Eslami, Zahra
Effect of Nanosilica on Bending Strength and Thermal Stability of Glass Fiber/Phenolic Nanocomposite [Volume 29, Issue 4, 2016, Pages 377-386]
-
Eslami-Farsani, Reza
Graphene Surface Treatment Effects on Mechanical Behavior of Basalt FibersEpoxy Composites [Volume 31, Issue 2, 2018, Pages 155-170]
-
Eslami manesh, V.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Esmaeel poor, B.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
-
Esmaeely Nisiany, Rasool
Design, Construction, and Evaluation of Rubber Friction Tester [Volume 24, Issue 2, 2011, Pages 153-164]
-
Esmaeili, Erfan
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Esmaeilipur, Mahmood
Preparation and Characterization of a Cross-linked Matrimid/Polyvinylidene Fluoride Composite Membrane for H2/N2 Separation [Volume 29, Issue 6, 2017, Pages 505-517]
-
Esmaeli, M.
Application of Polymeric Binders in Ceramic Processing [Volume 9, Issue 2, 1996]
-
Esmail Zadeh, A.
Preparation of Cellular Rigid PVC by Extrusion: Investigation on Processing Variables [Volume 8, Issue 4, 1995]
-
Esmaili, N.
Preparation of Phosphino(polyacrylic acid) and Study on Its Application as Precipitation Inhibitor [Volume 12, Issue 1, 1999]
-
Esmailzade, A.
Preparation of Phosphino(polyacrylic acid) and Study on Its Application as Precipitation Inhibitor [Volume 12, Issue 1, 1999]
-
Esmizadeh, E.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Esmkhani, Masood
Experimental Investigation on Fatigue Behavior of Epoxy Resin under Load and Displacement Controls [Volume 27, Issue 5, 2014, Pages 382-373]
-
Etemad, S G.
Evaluation of Surface Roughness of Polyacrylonitrile Nanowebs [Volume 21, Issue 1, 2008, Pages 61-69]
-
Etemadi, A.H.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Etemadi, Habib
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Etrati-Khosroshahi, M
Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]
-
Etrati-Khosroshahi, M.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
-
Etrati Khosroshahi, M.
Ablation of Poly(vinyl alcohol) Polymer Using Fiber-Delivered Pulse HF Laser [Volume 10, Issue 4, 1997]
-
Ezoji, Maryam
Optimization of Processing Parameters in 3D-Printing of Poly(lactic acid) by Fused Deposition Modeling Method [Volume 30, Issue 2, 2017, Pages 115-126]
F
-
Fadaei, Amir
Prediction of Bubble Size Distribution in a Batch Foaming System of Polystyrene-Supercritical CO2 [Volume 36, Issue 4, 2024, Pages 437-450]
-
Fadaei, Hamid
A Survey on Applications of Nanomaterials for Conservation of Artworks [Volume 30, Issue 5, 2018, Pages 371-389]
-
Faezipour, M.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Faghihi, F.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Faghihi, J.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Fakhari, Mohamadali
Synergistic Effect of Intumescent Flame Retardant and Organically Modified Montmorillonite on Flame-Retardant and Foaming Properties of High Density Polyethylene/Walnut Shell Powder Biocomposites [Volume 30, Issue 4, 2017, Pages 299-310]
-
Fakharian, Hossein
Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
-
Fakhraian, H.
Synthesis of a Triblock Nonionic Copolymer Poly(ricineoleic acid-b-ethyleneglycol-b-ricineoleic acid) and Investigation of
the Stability of Its Associated Water/Oil Emulsion [Volume 21, Issue 6, 2009, Pages 457-464]
-
Fakhri, Mansour
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Fakhri, S.
Structural Investigation of Macromolecules Using NMR Spectroscopy in Solution [Volume 8, Issue 3, 1995]
-
Fallah, Mehrdad
Synthesis of Branched Polymers and Dispersion of Nanosilica and the Effect of Their Interaction on Hydrated Cement Morphology [Volume 31, Issue 3, 2018, Pages 239-250]
-
Fallahi, E.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Fallahnejad, Zeinab
Improvement in Polyamide Thin Film Nanofiltration Membrane Performance with Modified Titanium
Oxide Nanotubes [Volume 33, Issue 4, 2020, Pages 291-304]
-
Fallahnejad, Zeynab
Thin Film Polyamide Membranes Containing Modified Manganese Dioxide Nanotubes for Removal of Sodium and Copper Ions [Volume 34, Issue 2, 2021, Pages 155-172]
-
Famili, M.H.N.
Preparation of Oxygen Barrier Films Based on LDPE and LLDPE [Volume 12, Issue 2, 1999]
-
Famili, M.H.N.
Preparation of Oxygen Barrier Films Based on LDPE and LLDPE [Volume 12, Issue 2, 1999]
-
Famili, M.H.N.
Preparation of Oxygen Barrier Films Based on LDPE and LLDPE [Volume 12, Issue 2, 1999]
-
Famili, M.H.N.
Continuous Injection Molding of Thermoplastic Structural Foam [Volume 16, Issue 2, 2003]
-
Famili, M.H.N.
Studying the Effective Parameters on Welding of Polyethylene Joints [Volume 16, Issue 3, 2003]
-
Famili, M.H.N.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
-
Famili, M.H.N.
The Effect of Shear Rate on Dissolution of Gas and Cell Density in Continuous Foaming Process [Volume 22, Issue 3, 2009, Pages 209-215]
-
Famili, M.H.Navid
Design and Manufacture of Self-Wiping Extruder for the Reaction Extrusion of Melamine Formaldehyde [Volume 17, Issue 4, 2004]
-
Famili, M.H.Navid
Study of the Effect of Compatibilizer on the Mechanical Properties of POM/NBR Blend [Volume 17, Issue 6, 2005]
-
Famili, M.H.Navid
Manufacture of Magneto-rheological Actuator Based on Silicon Rubber [Volume 18, Issue 1, 2005]
-
Famili, M.H.Navid
Crystallinity Effect on Migration of Low MolecularWeight Substances from HDPE into Fatty Food [Volume 18, Issue 2, 2005]
-
Fanood, M.H.Rafie
Recovering and Formulation of PVC wastes of Pharmaceutical Packing Industries in Iran [Volume 4, Issue 2, 1991]
-
Fanoud, M.H.Rafii
Emulsion Copolymerization of Vinylchloride - Vinylacetate [Volume 6, Issue 1, 1993]
-
Farahani, B.Vasheghani
Investigations on Effect of Heat and Humidity on Polyurea and Gelatin Microcapsules [Volume 14, Issue 3, 2001]
-
Farahani, E.Vasheghani
Investigation of Polyhydroxyalkanoates (PHAs) Production in Activated Sludge Reactor [Volume 17, Issue 6, 2005, Pages 357-353]
-
Farahani, Mina
Effect of Nucleating Agent Concentration on Non-Isothermal Melt Crystallization Kinetics of b-Nucleated Impact Polypropylene Copolymer [Volume 34, Issue 2, 2021, Pages 191-202]
-
Farahani, T.Darestani
Study of the Effect of Aging in Brake Fluid on Physico-Mechanical Properties and Thermal Resistance of EPDM Rubber Compounds Containing Various Contents of DCP [Volume 17, Issue 5, 2005]
-
Farahani, T.Darestani
Effect of Formulation on Mechanical Properties and Oil Resistance of NBR Compounds [Volume 18, Issue 1, 2005]
-
Farahi Shandiz, M.
Processing of Linear Low Density Polyethylene Film (LLDPE) [Volume 7, Issue 1, 1994]
-
Farahi Shandiz, M.
The Use of Fluoroelastomers in Processing of LLDPE Films [Volume 8, Issue 1, 1995]
-
Farahmand, F.
Preparation and Characterization of Alginate Impression Materials in Dental Applications [Volume 8, Issue 4, 1995]
-
Farahmandghavi, Farhid
Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
-
Farahnaki, Askar
Effect of Ultrasound on Physicochemical Properties of Wheat Starch [Volume 27, Issue 1, 2014, Pages 23-15]
-
Faraji, Samaneh
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Farajollah, Reihaneh
Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization [Volume 28, Issue 6, 2016, Pages 453-443]
-
Farajpoor, S.
Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
-
Faramarzi, Iraj
Mechanism of Improvement in Tribological Properties of Polyamide 6 by Addition of Irradiated Polytetrafluoroethylene Powder [Volume 27, Issue 6, 2015, Pages 412-403]
-
Farbodi, Maryam
Characterization of Chemically Synthesized Polyaniline-Polyvinylchloride-Montmorillonite Nanocomposite [Volume 28, Issue 2, 2015, Pages 130-121]
-
Farbodi, Maryam
Preparation of Antibacterial Polyvinylcholoride-Zno Nanocomposite with Improved Mechanical Properties Using Taguchi Experimental Design [Volume 28, Issue 5, 2015, Pages 383-373]
-
Farbodi, Maryam
Physicochemical and Antibacterial Properties of Synthesized Polyaniline-Chitosan-Nanosilver Hybrid Nanocomposite [Volume 29, Issue 4, 2016, Pages 323-333]
-
Fard, S.Pazoki
Preparation of Carboxylated Polyester Resin Based on 1,6-Hexanediol for Using in Thermoset Powder Coatings [Volume 17, Issue 4, 2004]
-
Fardi, Milad
Using Cyclohexanol as a Co-Surfactant in the Synthesis of New Mesoporous Silica Particles [Volume 26, Issue 6, 2014, Pages 524-513]
-
Fardi, Milad
SPB1 and SPB1,2: Synthesis and Determination of the Microstructure and Physical Properties [Volume 27, Issue 2, 2014, Pages 171-161]
-
Farhadbeigi, Navid
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Farhadi, F.
Carbon Fiber (2) [Volume 2, Issue 4, 1989]
-
Farhadi, Fatemeh
Determination of Morphological and Microstructural Properties of Polyacrylonitrile/Single-Walled Carbon Nanotubes Composite Nanofibers [Volume 27, Issue 4, 2014, Pages 279-267]
-
Farhang Zadeh, S.
Preparation and Characterization of Tetrabromobisphenol A [Volume 12, Issue 3, 1999]
-
Farhangiyan Kashani, Ali
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Farhangzadeh, S.
Polycarbonates: Synthetic Methods and Applications [Volume 7, Issue 3, 1994]
-
Farhangzadeh, S.
Preparation and Identification of BPA [Volume 8, Issue 2, 1995]
-
Farhangzadeh, S.
Capillary Rheometer: Theory and Applications Capillary Rheometer: Theory and Applications [Volume 12, Issue 4, 1999]
-
Farhat, I. A.
Effect of Molecular Structure on the Thermal Properties and Water Sorption of Thin Gelatin Films [Volume 21, Issue 1, 2008, Pages 27-34]
-
Farhdi, F.
Carbon Fiber (1) [Volume 2, Issue 3, 1989]
-
Farhoudian, Sana
Synthesis and Characterization of Carboxymethyl Cellulose/Layered Double Hydroxide Bionanocomposites [Volume 28, Issue 4, 2015, Pages 321-313]
-
Farid, Mansure
Synergistic Effect of Intumescent Flame Retardant and Organically Modified Montmorillonite on Flame-Retardant and Foaming Properties of High Density Polyethylene/Walnut Shell Powder Biocomposites [Volume 30, Issue 4, 2017, Pages 299-310]
-
Farid, Mohammad
Synergistic Effect of Intumescent Flame Retardant and Organically Modified Montmorillonite on Flame-Retardant and Foaming Properties of High Density Polyethylene/Walnut Shell Powder Biocomposites [Volume 30, Issue 4, 2017, Pages 299-310]
-
Farkhondehnia, Houra
The Effect of Electrical Stimulation on Growth and Proliferation of Neural Cells Using Conductive Nanofibrous Scaffolds [Volume 31, Issue 5, 2019, Pages 427-434]
-
Farmand, Reza Abbas
Physicochemical and Antibacterial Properties of Synthesized Polyaniline-Chitosan-Nanosilver Hybrid Nanocomposite [Volume 29, Issue 4, 2016, Pages 323-333]
-
Farnaz Sadat, Fattahi
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Farrokhi, Mojtaba
Synthesis and Characterization of ω-Halogenated Poly(dimethyl siloxane) [Volume 26, Issue 6, 2014, Pages 484-475]
-
Farrokhi, Mojtaba
Synthesis and Characterization of Poly(vinyl acetate)-b-poly(dimethylsiloxane) Diblock Copolymer by Iodine Transfer Radical Polymerization [Volume 28, Issue 6, 2016, Pages 463-455]
-
Farrokhi, Mojtaba
Functionalization of Poly(vinyl alcohol) and Ethylene-Vinyl Alcohol Copolymer with Various Reactive Functional Groups: Synthesis and Characterization [Volume 31, Issue 4, 2018, Pages 385-400]
-
Farrokhi, Mojtaba
Radical Copolymerization of Vinylimidazole and
Vinylphosphonic Acid: Sequence Distribution-Glass Transition Temperature Relationship in Copolymers [Volume 32, Issue 6, 2020, Pages 521-534]
-
Farrokhi, Mojtaba Farrokhi
Synthesis and Characterization of Vinyl Acetate and Dibutyl Maleate Copolymers by Reverse Iodine Transfer Radical Polymerization [Volume 28, Issue 1, 2015, Pages 72-61]
-
Farrokhzad, H.
Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
-
Farzaneh-Jobaneh, Esmaeil
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Fashandi, Hossein
Surface Modification of Electrospun Poly(vinylidene fluoride) Membrane by Low-Pressure Plasma Polymerization to Improve Long-Term Membrane Performance in Water Desalination Process Based on Air Gap Membrane Distillation Method [Volume 35, Issue 2, 2022, Pages 151-162]
-
Fashandi, Hossein
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Fasihi Dastjerdy, A.
Determination of Injection Port and Vent Locations of Hollow Tubes by RTM-Experimental and Computer Simulation [Volume 13, Issue 4, 2000]
-
Fasihi Dastjerdy, A.
A Theoretical and Experimental Study of the Mould Filling Time in Resin Transfer Moulding Process [Volume 14, Issue 1, 2001]
-
Fatahi, Alireza
A Review on Chitosan-Containing Polyurethanes: Synthesis, Properties and Applications [Volume 36, Issue 1, 2023, Pages 3-22]
-
Fatahi, Hasan
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
-
Fatehi, Marzie
Effect of Magnetic Field on the Type and Amount of Monomers in Polyhydroxyalkanoate Copolymer [Volume 27, Issue 4, 2014, Pages 298-291]
-
Fatehmy, S. mahdi
Modifying the Bondability of Rice Husk/Sodium Silicate Particleboard by Using Diisocyanate [Volume 21, Issue 1, 2008, Pages 3-8]
-
Fatehmy, S.M.
Investigating the Properties of Rice Husk/Urea Formaldehyde Resin Particleboard by Using Diisocyanate [Volume 21, Issue 2, 2008, Pages 95-105]
-
Fathi, Amir
Evaluation of the Impact Resistance of POM/TPU/CB Three-Phase Nanocomposite for Application in Bumper Bracket [Volume 34, Issue 6, 2022, Pages 557-568]
-
Fathi, Asghar
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Fathi, Marziyeh
In situ gelling hydrogels based on biodegradable polymers for effective ocular drug delivery: A review [(Articles in Press)]
-
Fathizadeh, Mohammad Ali
A Comparative Study on the Thermal Resistance, Flammability and Mechanical Properties of Unsaturated Polyester and Epoxy Resins [Volume 28, Issue 5, 2015, Pages 419-409]
-
Fathizadeh, Mohammad Ali
Unsaturated Polyester Resin Nanocomposites: An Overview [Volume 36, Issue 4, 2024, Pages 327-363]
-
Fattahi, Hassan
Effect of Solid Epoxy Resin on Properties of an Epoxy/Glass Prepreg [Volume 34, Issue 5, 2022, Pages 485-497]
-
Fattahi, Hassan
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
-
Fattahi Juybari, Hamid
Electrospinning of Nano-Porous Cellulose Acetate Fibers Under Humidified Condition [Volume 28, Issue 6, 2016, Pages 504-495]
-
Fauzi Ismail, Ahmad
Improvement in Polyamide Thin Film Nanofiltration Membrane Performance with Modified Titanium
Oxide Nanotubes [Volume 33, Issue 4, 2020, Pages 291-304]
-
Feda, Atieh
Electron Transporting Materials Based on n-Type Polymers in Inverted Perovskite Solar Cells: A Review [Volume 36, Issue 5, 2023, Pages 457-485]
-
Ferdowsi, Mohammad
Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
-
Fereidoon, Abdolhosien
Effect of Mesoporous Silica and Hydroxyapatite Nanoparticles on the Tensile and Dynamic Mechanical Thermal Properties of Polypropylene and Polypropylene Foam [Volume 27, Issue 5, 2014, Pages 439-423]
-
Fereidoonnia, M.
Comparison between Properties of Polyurethane Nanocomposites Prepared by Two Different Methods [Volume 21, Issue 6, 2009, Pages 471-476]
-
Feyz, E.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Firoozi, Mahtab
Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
-
Firouzbakht, Mohsen
Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]
-
Firouzi, A.
Analysis of the Parameters Affecting the Behaviour of Flexible Fibers in Power Law Fluid Flow Field in a Uniform Circular Pipe [Volume 14, Issue 4, 2001]
-
Forooraghi, Kayvan
Morphological Parameters in Relation to the Electromagnetic Properties of Microcellular Thermoplastic Polyurethane Foam in X-Band Frequency Ranges [Volume 30, Issue 1, 2017, Pages 19-30]
-
Fotoohi, F.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Foudazi, Reza
Controlling the Kinetics of Spinodal Decomposition in LCST PS/PVME Blends in Presence of Spherical Nanoparticles [Volume 28, Issue 4, 2015, Pages 288-277]
-
Frounchi, M.
Synthesis and Study of Poly(HEMA-co-NVP) Hydrogels for Contact Lens Applications [Volume 12, Issue 1, 1999]
-
Frounchi, M.
Synthesis of PVC Organosol Lacquers for Internal Metal Can Coatings [Volume 12, Issue 2, 1999]
G
-
G.,
Important Differences in Some Properties of Gypsumboard Reinforced with Two Types of Natural Fibers (Bagasse and Wood) [Volume 15, Issue 4, 2002]
-
Gangi, H.
Experimental Design for Polymerization Reaction of Vinyl Acetate and the Hydrolysis of Polyvinyl Acetate [Volume 15, Issue 5, 2003]
-
Ganjaee Sari, Morteza
Effect of Hyperbranched Polymers on Curing Behavior of UV Curable Inks in Inkjet Printing [Volume 29, Issue 3, 2016, Pages 276-285]
-
Ganjaiee Sari, M.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Ganji, F.
Improvement in Purification Method of a Synthesized Cyclic Dimeric Lactide [Volume 21, Issue 3, 2008, Pages 251-257]
-
Ganji, Fariba
Preparation and Optimization of Labeled Chitosan Nanoparticles and Evaluation of their Release from Transdermal Drug Delivery System [Volume 28, Issue 4, 2015, Pages 344-333]
-
Ganji, H.
Modeling of the Structure of Polyvinyl Acetate by Using 1H NMR [Volume 14, Issue 2, 2001]
-
Ganji, H.R.
Effect of Mixing Process on Mooney Viscosity and Die Swell Behavior of Rubber Compound [Volume 21, Issue 5, 2009, Pages 389-399]
-
Ganji, M.T.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Ganji, T.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Ganjidoust, H.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
-
Ganjidust, H.
Comparison of Natural Polymers and Chemical Coagulants in the Reduction of Organic Load of Whey [Volume 15, Issue 2, 2002]
-
Ganjidust, H.
Effect of Volatile Fatty Acids in Production of Polyhydroxyalkanoates by Activated Sludge [Volume 21, Issue 1, 2008, Pages 83-90]
-
Garoosi, Keyvan
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Gazaz, S.Mohammadian
Investigation of Viscoelastic and Curing Properties of Carbon Black Filled SBR Compounds Using Rubber Process Analyzer [Volume 19, Issue 6, 2007]
-
Geramipour, Mahdi
Synthesis and Characterization of Iron Magnetic Nanocomposite Hydrogel Based on Modified
Sodium Carboxymethyl Cellulose Using Acrylamide and Acrylic Acid and Investigation of Drug Delivery Properties [Volume 29, Issue 3, 2016, Pages 265-275]
-
Gh. Farahmand, F.
Applications of High-Resolution Solid-State 13C NMR Spectroscopy to Polymers [Volume 10, Issue 2, 1997]
-
Ghabezi, Pouyan
Mechanical Behavior of Quasi-sinusoidal Corrugated Composite sheets [Volume 24, Issue 5, 2012, Pages 379-389]
-
Ghabezi, Pouyan
Stiffness Matrices and Anisotropy in the Trapezoidal Corrugated Composite Sheets [Volume 26, Issue 4, 2013, Pages 289-275]
-
Ghaeminia,, Haleh
Synthesis and Characterization of Copolymer Poly(propylene-co-styrene) Grafted-Multiple-walled Carbon Nanotubes by Nitroxide-mediated Living Radical Polymerization and Solution Intercalation Method [Volume 33, Issue 5, 2021, Pages 401-417]
-
Ghaempour, Arezoo
Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA) and Nanoclay [Volume 28, Issue 4, 2015, Pages 299-289]
-
Ghaemy, M.
Study of Autosynergism Phenomenon in Stabilization of Polypropylene Against Thermal Oxidative Degradation [Volume 8, Issue 1, 1995]
-
Ghafari, Matin
Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
-
Ghafarzade Zare, H.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Ghafelebashi-Zarand, S. mahdi
Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of
Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
-
Ghafelebashi-Zarand, S.M.
Intermediate Radical Termination Theory in Elucidation of RAFT Kinetics and Comparison to Experimental Data [Volume 21, Issue 6, 2009, Pages 503-513]
-
Ghafelebashi-Zarand, S.M.
Employing Moment Equations Model to Study the Effect of Different Active Centers on Homopolymerization Kinetics of Ethylene [Volume 21, Issue 5, 2009, Pages 431-444]
-
Ghaffari, Rahil
Dextran/Bioactive Glass Nanocomposite Hydrogels:
Effect of Dextran Molecular Weight and Content on
Swelling Behavior and Structural Characteristics [Volume 34, Issue 3, 2021, Pages 249-265]
-
Ghaffarian, H.R.
Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
-
Ghaffarian, S.R.
Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
-
Ghaffarian, S.R.
Improvement in Char Formability of Phenolic Resin for Development of Carbon/Carbon Composites [Volume 21, Issue 2, 2008, Pages 127-132]
-
Ghaffarian, Seyed Reza
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Ghaffarian Anbaran, S.Reza
Mechanical Properties and Electromagnetic Interference (EMI) Shielding Performance of PP/CNT/Glass Fiber Microcellular Foam [Volume 34, Issue 4, 2021, Pages 373-385]
-
Ghafori, M.
Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
-
Ghafouri Taleghani, Hamidreza
Dextran/Bioactive Glass Nanocomposite Hydrogels:
Effect of Dextran Molecular Weight and Content on
Swelling Behavior and Structural Characteristics [Volume 34, Issue 3, 2021, Pages 249-265]
-
Ghahramani, Maral
Preparation, Characterization and Permeation Behavior of Poly(methyl acrylate)-Poly(dimethyl siloxane)-Poly(methyl acrylate) Block Copolymer/Poly(vinyl acetate) Blend Membranes [Volume 28, Issue 1, 2015, Pages 60-47]
-
Ghahramani, Maral
Effect of Polyurethane Substrate Morphology on Gas Permeation Properties of Poly(dimethyl siloxane) Block Copolymer/Polyurethane Layered Membranes [Volume 35, Issue 3, 2022, Pages 257-279]
-
Ghamami, S.
Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
-
Ghanavati, Sorror
Effect of Graphene Oxide Nanoparticles on the Physical and Mechanical Properties of Chitosan/Gelatin/Polyvinyl Alcohol Films [Volume 33, Issue 1, 2020, Pages 75-87]
-
Ghanbar, M.
Chemical Modification of Cellulose to Improve Its Transfer Printability [Volume 13, Issue 4, 2000]
-
Ghanbari, D.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Ghanbarzadeh, B.
Preparation and Study of Physical Properties of Starch-CMC Biodegradable Composite Film Containing
Montmorillonite Nanoparticles [Volume 22, Issue 3, 2009, Pages 225-232]
-
Ghanbarzadeh, B.
Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property,
Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
-
Ghanbarzadeh, Babak
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
-
Ghanbarzadeh, Babak
The Effects of Montmorillonite and Cellulose Nanocrystals on Physical Properties of Carboxymethyl Cellulose/Polyvinyl Alcohol Blend Films [Volume 24, Issue 6, 2012, Pages 455-466]
-
Ghanbarzadeh, Babak
Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
-
Ghanbarzadeh, Babak
Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
-
Ghanbarzadeh, Babak
Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
-
Ghanbarzadeh, Babak
Properties of Poly(lactic acid) Nanocomposite Film Containing Modified Cellulose Nanofibers [Volume 26, Issue 6, 2014, Pages 497-485]
-
Ghanbarzadeh, Babak
Effect of Surface Modification by Oleic Acid on Physical Properties of Cellulose Nanofibers [Volume 26, Issue 4, 2013, Pages 302-291]
-
Ghanbarzadeh, Babak
Sodium Caseinate-Carrageenan Biopolymeric Nanocomplexes as a Carrier of Vitamin D: Study of Complex Formation, Particles Size and Encapsulation Efficiency [Volume 27, Issue 1, 2014, Pages 49-37]
-
Ghanbarzadeh, Babak
Plasticized Starch Based Bionanocomposites Containing Cellulose Nanowhiskers and Titanium Dioxide Nanoparticles: Study of Structure and Water Vapor Permeability [Volume 27, Issue 3, 2014, Pages 192-179]
-
Gharabaghy, B.
The Effects of γ-Ray Irradiation Dose on the Electrical Resistance and PTC Temperature of Polyethylene/Carbon Composite [Volume 20, Issue 4, 2007, Pages 325-329]
-
Gharbani, Parvin
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Gharebaghi Tazehkand, H.
Effect of Carbon Black/Organoclay Hybrid Filler System on Tire Tread Compound Properties [Volume 21, Issue 4, 2008, Pages 339-346]
-
Gharibi, Reza
Anticorrosive Electroactive Castor Oil-Based Polyurethane Coatings: Preparation and Properties [Volume 30, Issue 4, 2017, Pages 337-349]
-
Gharibian, E.
Synthesis and Study of Poly(HEMA-co-NVP) Hydrogels for Contact Lens Applications [Volume 12, Issue 1, 1999]
-
Ghasaban, Samaneh
Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
-
Ghasemi, A.R.
Analytical and Numerical Studies of the Effect of Impact Forces on Polymer/Clay Nanocomposites [Volume 23, Issue 3, 2010, Pages 235-245]
-
Ghasemi, A.R.
Effect of Residual Thermal Stresses in Curing Process on the Deformation of Flat and Cylindrical Composite Laminates [Volume 22, Issue 1, 2009, Pages 21-30]
-
Ghasemi, A.R.
Development of an Integral Method for Determination of Non-uniform Residual Stresses in Laminated Composites [Volume 21, Issue 4, 2008, Pages 347-355]
-
Ghasemi, A.R.
Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites
Using Hole Drilling Method [Volume 20, Issue 4, 2007, Pages 337-347]
-
Ghasemi, ahmad reza
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
-
Ghasemi, Ahmad Reza
Investigation of Mechanical and Thermal Properties of Polymer Composites Reinforced by Multi-Walled Carbon Nanotube for Reduction of Residual Stresses [Volume 27, Issue 3, 2014, Pages 230-213]
-
Ghasemi, Ahmad Reza
Optimization of Curing Conditions and Effect of Plasticizer Amount on the Mechanical and Thermal Properties of Epoxy Resin [Volume 33, Issue 6, 2021, Pages 479-495]
-
Ghasemi, D.
Synthesis of 4,4’-Isopropylidene Diphenol with Cation-exchange Resin
Catalyst Based on Polystyrene-divinyl Benzene [Volume 19, Issue 2, 2006, Pages 143-149]
-
Ghasemi, E.
Study of Mechanical Properties, Thermal Behaviour and Morphology of PP/HDPE and PP/ LDPE Blends [Volume 10, Issue 2, 1997]
-
Ghasemi, E.
Recycling of PET Beverage Bottles and Studies on its Crystallinity, Mechanical and Rheological Properties [Volume 14, Issue 6, 2002]
-
Ghasemi, I.
Kinetic Study of Cross-linking Reaction by Peroxide Method in LDPE Using DSC, a Rheometer and an Internal Mixer [Volume 15, Issue 2, 2002]
-
Ghasemi, I.
Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
-
Ghasemi, I.
Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]
-
Ghasemi, I.
Investigating the Effect of Wood Particle Size on the Rheology and Physical-Mechanical Properties of
Wood-Polypropylene Composite [Volume 21, Issue 1, 2008, Pages 45-52]
-
Ghasemi, Ismaeil
Mechanical and Shape Memory Properties of Poly(vinyl acetate)/Poly(lactic acid) Blends [Volume 31, Issue 1, 2018, Pages 57-68]
-
Ghasemi, Ismaeil
Shape Memory Properties of Polyurethane/Graphene Nanoplatelets Nanocomposite [Volume 32, Issue 1, 2019, Pages 31-42]
-
Ghasemi, Ismaeil
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
-
Ghasemi, Ismaeil
Optimization of Gas Barrier Properties of Nanocomposites of HDPE/Nanoclay Using
Response Surface Methodology [Volume 33, Issue 1, 2020, Pages 25-39]
-
Ghasemi, Ismaeil
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Ghasemi, Ismail
Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
-
Ghasemi, Ismail
Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
-
Ghasemi, Ismail
Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene)/ Modified Thermoplastic Starch Blends [Volume 29, Issue 4, 2016, Pages 311-321]
-
Ghasemi, Ismail
Shear-Induced Crystallization of Poly(lactic acid)/Graphene Nanocomposite [Volume 29, Issue 5, 2017, Pages 415-427]
-
Ghasemi, Ismail
Functionalization of Graphene Nanoplatelet and the Shape Memory Properties of Nanocomposite Based on Thermoplastic Elastomer Polyurethane/Poly(vinyl chloride)/Graphene Nanoplateletes [Volume 30, Issue 4, 2017, Pages 287-297]
-
Ghasemi, Ismaile
Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticle Functionalization [Volume 27, Issue 5, 2014, Pages 394-383]
-
Ghasemi, Ismaile
Correlation between Microstructure and Rheological Properties of Broad Molecular Weight Distribution High Density Polyethylenes [Volume 28, Issue 1, 2015, Pages 38-27]
-
Ghasemi, L.
Effect of Drying Temperature of Polyester Chips on the Properties of Textured Yarn [Volume 18, Issue 3, 2005, Pages 171-180]
-
Ghasemi, Laleh
Fabrication of Antibacterial Poly(vinyl alcohol) Microfibers Mat for Wound Dressing Application [Volume 29, Issue 1, 2016, Pages 15-25]
-
Ghasemi, M.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
-
Ghasemi, Maryam
Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
-
Ghasemi, Seyed Morteza
Polystyrene Porous Films Prepared by Non-solvent Induced Phase Separation Process: Structure-Thermodynamic Parameters Relationship” [Volume 34, Issue 4, 2021, Pages 403-415]
-
Ghasemi-Mobarakeh, Laleh
Coating of Silk Fabric Using PVA/Ciprofloxacin Hcl Nanofibers for Biomedical Applications [Volume 29, Issue 2, 2016, Pages 171-184]
-
Ghasemi Karajabad,, Saber
Synthesis and Characterization of Copolymer Poly(propylene-co-styrene) Grafted-Multiple-walled Carbon Nanotubes by Nitroxide-mediated Living Radical Polymerization and Solution Intercalation Method [Volume 33, Issue 5, 2021, Pages 401-417]
-
Ghasemy, H.
Study of Autosynergism Phenomenon in Stabilization of Polypropylene Against Thermal Oxidative Degradation [Volume 8, Issue 1, 1995]
-
Ghasemzadeh, Hossein
Methyl Violet Dye Absorption from Aqueous Solutions by Nanomagnetic Hydrogels Based on κ-Carrageenan and Acrylic Acid [Volume 29, Issue 4, 2016, Pages 365-376]
-
Ghasemzadeh Mohammadi, Hossein
Controlled Release of Indomethacin from Smart Starch-Based Hydrogels Prepared Acrylic Acid and b-Cyclodextrin as a Nanocarrier [Volume 29, Issue 6, 2017, Pages 495-504]
-
Ghasemzadeh Mohammadi, Hossein
Nanomagnetic Hydrogels Based on Carboxymethylcellulose/Diatomaceous Earth Grafted with Acrylamide for Adsorption of Cationic Crystal Violet Dye [Volume 31, Issue 2, 2018, Pages 171-185]
-
Ghasri, M.A.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Ghazanfari Moghaddam, A.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Ghazanfari Moghaddam, Ahmad
Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
-
Ghazizadeh, Elaheh
Preparation of Gas Sensor Based on Polymer Nanocomposite for Qualitative Detection of Hydrogen Sulfide [Volume 29, Issue 5, 2017, Pages 443-454]
-
Ghazy Nejad, M.
The Effect of Titanium Acrylate on Thermal and Chemical Properties of modified Epoxy Resins [Volume 8, Issue 4, 1995]
-
Ghiaci, M.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Ghiass, M.
The Effect of Titanium Acrylate on Thermal and Chemical Properties of modified Epoxy Resins [Volume 8, Issue 4, 1995]
-
Ghiass, Majid
Kinetic Studies of Poly(ethylene terephthalate)
Aminolysis Process without Catalyst [Volume 33, Issue 5, 2021, Pages 435-443]
-
Ghiass, Majid
Superabsorbent Microparticles for Production of Concrete Using Ultrasound: A Performance Study [Volume 36, Issue 1, 2023, Pages 61-72]
-
Ghiass Arani, G.
A Comparison between Silica–immobilized Ligands and their Polysiloxane Counterparts [Volume 16, Issue 5, 2004]
-
Ghobadinejad, Z.
Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
-
Ghodratpour, Faezeh
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
-
Ghofrani, Borhan
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Gholami, Ronak
Potato Starch/Montmorillonite-Based Nanocomposites: Water Sensitivity, Mechanical and Thermal Properties and XRD Profile Study [Volume 26, Issue 2, 2013, Pages 91-100]
-
Gholami, Ronak
Modeling Water Vapor Sorption and Permeability in Starch-Montmorillonite Nanocomposite Films [Volume 26, Issue 3, 2013, Pages 232-221]
-
Gholampour, Mahdi
Mechanical Properties and Electromagnetic Interference (EMI) Shielding Performance of PP/CNT/Glass Fiber Microcellular Foam [Volume 34, Issue 4, 2021, Pages 373-385]
-
Gholipoor, A.Sh.
A Review on Conducting Polyfurans Synthesis, Properties and Their Applications [Volume 10, Issue 3, 1997]
-
Gholipour, Iman
Effect of Solid Epoxy Resin on Properties of an Epoxy/Glass Prepreg [Volume 34, Issue 5, 2022, Pages 485-497]
-
Gholipour, N.
Application of Thermal Analysis Methods on the Study of PE Thermal Degradation and the Influence of Mg (OH)2 as Fire Retardant [Volume 15, Issue 4, 2002]
-
Gholipour-Kanani, Adeleh
Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
-
Gholipour-Kanani, Adeleh
Fabrication and characterization of nanofibrous scaffold based on chitosan containing cerium oxide nanoparticles for wound healing application [Volume 35, Issue 6, 2023, Pages 565-580]
-
Gholshan Ebrahimi, N.
Study on Shape Memory of Poly(vinyl chloride)/Thermoplastic Polyester Urethane Blends [Volume 20, Issue 2, 2007, Pages 125-132]
-
Gholshan Ebrahimi, N.
Comparison of Compatibilizer Effect on Blend Fibers Including Virgin and Recycled PET [Volume 20, Issue 2, 2007, Pages 133-145]
-
Ghorashi, Mahaan
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
-
Ghorbani, Mohsen
Colloidal Preparation of Polyaniline-Poly(vinyl alcohol) - SiO2 Nanocomposite and Study of its Anti-corrosive Properties [Volume 28, Issue 1, 2015, Pages 46-39]
-
Ghoreishy, H.
Tension Behavior Analysis of Elastomers by Finite Elements Method [Volume 4, Issue 4, 1991]
-
Ghoreishy, M.H.
Scale-up of Rubber Mixing Using Unit Work Method [Volume 13, Issue 3, 2000]
-
Ghoreishy, M.H.R.
The Three Dimensional Simulation and Development of a Computer Software for Rubber Curing Process by Finite Element Method [Volume 17, Issue 1, 2004]
-
Ghoreishy, M.H.R.
The Three Dimensional Simulation and Development of a Computer Software for Rubber Curing Process by Finite Element Method [Volume 17, Issue 1, 2004]
-
Ghoreishy, M.H.R.
Evaluation of EPDM Addition in NR/BR Compound by Reactive Mixing [Volume 22, Issue 5, 2010, Pages 331-339]
-
Ghoreishy, M.H.R.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Ghoreishy, M.H.R.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Ghoreishy, M.H.R.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Ghoreishy, M.H.R.
An Experimental and Numerical Verification of Different Hyperelastic Material Models for Rubbers under Tension and Compression Loads [Volume 22, Issue 4, 2009, Pages 273-284]
-
Ghoreishy, M.H.R.
A Theoretical and Experimental Study on the Footprint Analysis of a 185/65R14 Radial Tyre with Tread Pattern
Using Finite Element Method [Volume 20, Issue 6, 2008, Pages 589-598]
-
Ghoreishy, M.H.R.
Studies on Properties of Short Fiber Reinforced Natural Rubber Composites [Volume 21, Issue 3, 2008, Pages 259-267]
-
Ghoreishy, M.H.R.
Modelling of the Indentation Behaviour of Thermoplastic Honeycomb Sandwich Panels [Volume 21, Issue 2, 2008, Pages 157-166]
-
Ghoreishy, M.H.R.
3-Dimensional Modeling of Flow of Polymeric Fluids with Various Viscosities in an Extrusion Die Using Mixed
Method and Tetrahedral Elements [Volume 21, Issue 2, 2008, Pages 167-179]
-
Ghoreishy, Mir Hamid Reza
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
-
Ghoreishy, Mir Hamid Reza
Simulating Mechanical Behavior of a Tread Rubber Compound by a Hyperelastic/Hysteresis Model [Volume 24, Issue 5, 2012, Pages 369-377]
-
Ghoreishy, Mir Hamid Reza
Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
-
Ghoreishy, Mir Hamid Reza
Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]
-
Ghoreishy, Mir Hamid Reza
Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
-
Ghoreishy, Mir Hamid Reza
Steady State Analysis and Prediction of Rolling Resistance for a Moving Radial Tire Using Hyper-Viscoelastic Model [Volume 27, Issue 3, 2014, Pages 240-231]
-
Ghoreishy, Mir Hamid Reza
Computer Simulation and Experimental Study of Deformation in a Radial Tire under Different Static Loads Using Finite Element Method [Volume 27, Issue 4, 2014, Pages 336-325]
-
Ghoreishy, Mir Hamid Reza
Numerical Modeling and Experimental Study of Elastic-Plastic Behavior of Carbon Nanotubes Reinforced Nanocompsites of PA6/NBR Using a Microfinite Element Model [Volume 27, Issue 5, 2014, Pages 421-409]
-
Ghoreishy, Mir Hamid Reza
A Theoretical and Experimental Investigation of Mechanical Behavior of Steel-Rubber Long Fiber Composites Using Finite Element Method and Analytical Models [Volume 29, Issue 2, 2016, Pages 139-155]
-
Ghoreishy, Mir Hamid Reza
The Molecular Structure of SBR and Filler Type Effects on Thermal Diffusivity of SBR/BR Compounds Used in Tire Tread [Volume 30, Issue 2, 2017, Pages 139-149]
-
Ghoreishy, Mir Hamid Reza
Effect of Graphene Nanoplatelets on Rheology, Tensile Properties and Curing Behavior of Nanocomposites Based on NBR/PVC Blends Prepared by Melt Intercalation Method [Volume 31, Issue 3, 2018, Pages 289-301]
-
Ghoreishy, Mir Hamid Reza
Mechanical and Morphological Properties of Short Nylon Fibers and Carbon Nanotubes Reinforced NR/SBR Nanocomposites [Volume 31, Issue 4, 2018, Pages 345-357]
-
Ghoreishy, Mir Hamid Reza
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Ghoreishy, Mir Hamid Reza
Experimental Investigation of Mechanical Properties, Fracture Mechanism and Crack Propagation of PA6/NBR/Clay Nanocomposites [Volume 33, Issue 2, 2020, Pages 159-172]
-
Ghoreishy, Mir Hamid Reza
Study the Hyper-Viscoelastic and Stress Softening
Behaviors of Various SBR/CB Filled Compounds
Using a Triple Model [Volume 33, Issue 4, 2020, Pages 339-350]
-
Ghoreishy, Mir Hamid Reza
Development of a New Model Based on Ogden-Roxburgh Model for the Prediction of the Stress-Softening Behavior of Carbon Black-Filled Rubber Compounds [Volume 35, Issue 1, 2022, Pages 67-80]
-
Ghoreishy, Mir Hamid Reza
Study on the Effectiveness of Some Multicomponent Material Models with Hyper-viscoelasticity and Stress Softening for SBR/Carbon Black Compounds under two Loading Modes [Volume 35, Issue 6, 2023, Pages 555-564]
-
Ghoreishy, Mir Hamid Reza
Multiscale Modeling of Mechanical Properties of Green Tire Tread Compound [Volume 36, Issue 2, 2023, Pages 177-189]
-
Ghoreyshi, A.A.
A Generic Model for Prediction of Separation Performance of Olefin/Paraffin Mixture by Glassy Polymer Membranes [Volume 20, Issue 6, 2008, Pages 575-588]
-
Ghoryshi, M.H.R.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Ghoryshi, S.A.A
Sorption Behavior of CO2 and CH4 of Glassy Polymeric Membranes and Analytical Discussion of Partial Immobilization Model [Volume 20, Issue 2, 2007, Pages 165-178]
-
Gilani, Mahdi
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Gilani, Medi
Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
-
Godarzi, ِDariush
Dependence of Dielectric Constant and Mechanical Properties of Expanded Polystyrene Foam on Cell Wall Thickness [Volume 36, Issue 5, 2023, Pages 509-519]
-
Goharpey, F.
Matrix-Fibril Morphology and Structure of Polyblend Fibers in Melt Spinning Process: A Review [Volume 21, Issue 5, 2009, Pages 367-388]
-
Goharpey, Fatemeh
Controlling the Kinetics of Spinodal Decomposition in LCST PS/PVME Blends in Presence of Spherical Nanoparticles [Volume 28, Issue 4, 2015, Pages 288-277]
-
Goharpey, Fatemeh
Effect of Nanocellulose on Phase Behavior of off-Critical PS/PVME Blend [Volume 30, Issue 6, 2018, Pages 531-545]
-
Golabi, S.M.
Polymeric and Nonpolymeric Modified Electrodes [Volume 7, Issue 1, 1994]
-
Golbang, Atefeh
Responses of Polystyrene/MWCNT Nanocomposites to Electromagnetic Waves and the Effect of Nanotubes Dispersion [Volume 27, Issue 3, 2014, Pages 201-193]
-
Golbang, Atefeh
Dispersion of Zinc Oxide Nanoparticles in Polystyrene Matrix: Comparison of Rheological and Electrical
Properties [Volume 31, Issue 2, 2018, Pages 99-109]
-
Goli, A.
The Effect of SBS Polymer on the Dynamic Properties of Asphalt [Volume 21, Issue 6, 2009, Pages 465-470]
-
Goli, A.
Effect of Polymer on Bitumen Properties and its Performance Grade [Volume 21, Issue 3, 2008, Pages 201-208]
-
Golshan Ebrahimi, N.
Preparation and Properties of PP/PET Blend [Volume 12, Issue 3, 1999]
-
Golshan Ebrahimi, N.
Investigation of the Properties of Produced Blend Fibers from Modified PP with PET [Volume 13, Issue 1, 2000]
-
Golshan Ebrahimi, N.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
-
Golshan Ebrahimi, N.
Compatibility Study of PP/PET Blend Fibers by PP-g-MA Compatibilizer [Volume 15, Issue 2, 2002]
-
Golshan Ebrahimi, N.
Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]
-
Golshan Ebrahimi, Nadereh
VVertical Electrospinning of UHMWPE/ZnO Nanocomposite Fibers at High Temperature [Volume 27, Issue 2, 2014, Pages 141-131]
-
Golzar, Mohammad
Mechanical Behavior of Quasi-sinusoidal Corrugated Composite sheets [Volume 24, Issue 5, 2012, Pages 379-389]
-
Golzar, Mohammad
Stiffness Matrices and Anisotropy in the Trapezoidal Corrugated Composite Sheets [Volume 26, Issue 4, 2013, Pages 289-275]
-
Gomari, Sepideh
Polymer-Graphene Nanoplatelets Nanocomposites: Properties and Applications [Volume 32, Issue 2, 2019, Pages 101-121]
-
Gomari, Sepideh
Optimization of Gas Barrier Properties of Nanocomposites of HDPE/Nanoclay Using
Response Surface Methodology [Volume 33, Issue 1, 2020, Pages 25-39]
-
Gomari, Sepideh
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Goodarzian, N.
Modified Lignosulfonate as a Concrete Superplasticizer [Volume 8, Issue 3, 1995]
-
Gorji, B.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Gorjian, G.
Spiders: Silk Spinning and Properties [Volume 5, Issue 4, 1992]
-
Gorzin Motaie, Arya
Adsorption from Aqueous Solution Containing Zinc and Copper Ions with Carboxymethylated Kraft Lignin: Mechanism and Kinetic Study [Volume 34, Issue 4, 2021, Pages 359-371]
-
Goudarzian, N.
The Effect of Titanium Acrylate on Thermal and Chemical Properties of modified Epoxy Resins [Volume 8, Issue 4, 1995]
H
-
H.,
Application of Chitosan as an Adsorbent for Colour Removal of Textile Industrial Wastewaters [Volume 12, Issue 4, 1999]
-
H., G.
Study of the Effect of Triethylaluminium Concentration and Temperature on the Rate of Polymerization of Propylene: Isotacticity Index and Mv [Volume 9, Issue 3, 1996]
-
H., M.
Science and Technology of Prepregs [Volume 4, Issue 1, 1991]
-
H., M.
Structural Foams [Volume 5, Issue 1, 1992]
-
H., M.
A Theoretical and Experimental Study of the Mould Filling Time in Resin Transfer Moulding Process [Volume 14, Issue 1, 2001]
-
H., M.
The Effect of Glass Fiber on the Properties of Melamine-Formaldehyde Moulding Compounds [Volume 14, Issue 4, 2001]
-
H., M.
The Effect of Glass Fiber on the Properties of Melamine-Formaldehyde Moulding Compounds [Volume 14, Issue 4, 2001]
-
H., M.
Thermal Degradation Kinetics of Phenolic Resins Used in Ablative Heat Shields [Volume 15, Issue 4, 2002]
-
H. Ebrahimi, M.
Experimental Study of Particle Size Distribution in Suspension Polymerization [Volume 14, Issue 3, 2001]
-
H. Khanli, H.
Study of Mechanical Properties of HDPE/LLDPE Blend [Volume 10, Issue 4, 1997]
-
H. Nekoomanesh, M.
Preparation of Polymer Electrolytes Based on Copoly(ethylene oxide-propyleneoxide)/Li Salts [Volume 5, Issue 2, 1992]
-
H. Nekoomanesh, M.
Determination of Styrene-Butyl Acrylate Copolymer Composition [Volume 9, Issue 2, 1996]
-
H. Nekoomanesh, M.
Slurry Polymerization of Propylene Using High Activity Heterogeneous Ziegler-Natta Catalyst, MgCl2[Mg(OEt)2]/TiCl4/DNBP/TEA/DMDCHS [Volume 11, Issue 4, 1998]
-
H. Rafi'ee, M.
The Photo-Oxidative Degradation of EPDM Rubber [Volume 8, Issue 3, 1995]
-
H. Rafii, M.
Enhanced Oil Recovery and Polyacrylamide [Volume 2, Issue 4, 1989]
-
H. Shafiee, N.
Microencapsulation of Orange Oil and Evaluating the Effect of Some Processing Variables on Qualities of the Capsules [Volume 8, Issue 3, 1995]
-
Hadadi, Amir Hoshang
Study of Abrasion of Rubber Materials by Experimental Design, Response Surface and Artificial Neural Network Modeling [Volume 28, Issue 3, 2015, Pages 209-197]
-
Hadadi, V.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Hadadi, V.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Haddad, Reza
Fabrication of Polyacrylonitrile-Polyoxomolybdate Composite Nanofibers Membrane as a Protective Layer in Protective Textiles by Electrospinning [Volume 33, Issue 4, 2020, Pages 305-314]
-
Haddadi, Seyyed Arash
A Poly(vinyl acetate)/Colloidal SiO2 Nanocomposite Synthesized by Emulsion Polymerization and Study of Its Mechanical, Thermal and Rheological Properties [Volume 30, Issue 2, 2017, Pages 151-161]
-
Haddadi, V.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Haddadi, Vahid
Effect of Concentration and Size of Crumb Rubber on Rheological and Flexibility Properties of Bitumen [Volume 32, Issue 6, 2020, Pages 475-483]
-
Haddadi-Asl, V.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Haddadi-Asl, V.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Haddadi-Asl, V.
Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
-
Haddadi-Asl, V.
Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
-
Haddadi-Asl, V.
Intermediate Radical Termination Theory in Elucidation of RAFT Kinetics and Comparison to Experimental Data [Volume 21, Issue 6, 2009, Pages 503-513]
-
Haddadi-Asl, V.
Employing Moment Equations Model to Study the Effect of Different Active Centers on Homopolymerization Kinetics of Ethylene [Volume 21, Issue 5, 2009, Pages 431-444]
-
Haddadi-Asl, V.
Investigating the Effect of Different Kinetic Parameters on UHMWPE Synthesis [Volume 21, Issue 2, 2008, Pages 141-148]
-
Haddadi-Asl, vahid
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Haddadi-Asl, vahid
Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of
Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
-
Haddadi-Asl, Vahid
Atom Transfer Radical Polymerization of Styrene in Presence of Mesoporous Silica Nanoparticles: Application of Reverse, Simultaneous Reverse and Normal Initiation Techniques [Volume 27, Issue 1, 2014, Pages 90-79]
-
Haddadi-Asl, Vahid
Synthesis of Polystyrene/MCM–41 Nanocomposites through AGET ATRP and ARGET ATRP [Volume 28, Issue 3, 2015, Pages 255-243]
-
Haddadi-Asl, Vahid
Effect of Pluronic Introduction to Polycaprolactone Substrate on the Blend Hydrophilicity by Molecular Dynamic Simulation [Volume 29, Issue 3, 2016, Pages 286-300]
-
Haddadi asl, Vahid
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Haddadi Asl, V.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Hadi, F.
Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
-
Hadi, F.
Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
-
Hadi, Hojjatallah
Fabrication of Polyacrylonitrile-Polyoxomolybdate Composite Nanofibers Membrane as a Protective Layer in Protective Textiles by Electrospinning [Volume 33, Issue 4, 2020, Pages 305-314]
-
Hadi, Zohreh
Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
-
Hadian, Najmeh
MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
-
Hadizade Raeisi, Hamidreza
Improvement in Ablation and Thermal Properties of Ultra-lightweight Silicone/Cork Composites Insulator Using Novolac Aerogel [Volume 30, Issue 6, 2018, Pages 517-529]
-
Hadizadeh, Elahe
Effect of Benzoyl Peroxide Content on Physical and Mechanical Properties of a Two-Component Methylmethacrylate-based Traffic Paint [Volume 30, Issue 6, 2018, Pages 547-555]
-
Haghayegh, M.
Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
-
Haghgo, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Haghi, A.Khodaparast
The Effect of Microwave Radiation on Dyeing of Polyester Fibers: Studying the Effect of Pre-treatment of Fibers in Organic Solvent [Volume 17, Issue 3, 2004]
-
Haghighat, H.R.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Haghighat IGsh, M.
Alkaline Hydrolysis of Polyester Fibers: A Review [Volume 8, Issue 4, 1995]
-
Haghighat kish, M.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
-
Haghighat Kish, M.
Enzyme Biopolishing of Cotton Fabric: Effects of Trichoderma Cellulase on Cotton Fabric Properties [Volume 9, Issue 1, 1996]
-
Haghighat Kish, M.
Enzyme Biopolishing of Cotton Fabric: Effects of Neurospora Crassa on Cotton Fabric Properties [Volume 9, Issue 3, 1996]
-
Haghighat Kish, M.
Effect of Mixing Ratio and Compatibilizer on Rheological, Morphological and Thermal Properties of Polypropylene/Nylon 6 Alloy [Volume 14, Issue 4, 2001]
-
Haghighat Kish, M.
Some Properties of Polyamide 6 Fibers Produced by Wet-spinning [Volume 15, Issue 2, 2002]
-
Haghighat Kish, M.
Effect of Tension on the Light Stability of Polypropylene Filament Yarns [Volume 15, Issue 3, 2002]
-
Haghighat Kish, M.
The Effect of Drawing Parameters on Some Properties of Nylon 6 Filament Yarn [Volume 16, Issue 4, 2003]
-
Haghighat Kish, M.
Extraction of Micro- and Nano-Fibrils from Nylon 6/Polypropylene Grafted with Maleic Anhydride/Polypropylene Blended Films [Volume 23, Issue 2, 2010, Pages 155-169]
-
Haghighat Kish, M.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Haghighat Kish, M.
Effects of Decalin on Some Properties of Polypropylene Continuous Filaments [Volume 20, Issue 5, 2008, Pages 465-479]
-
Haghighat Kish, Mohamad
Photo-oxidation of Polypropylene Fiber and Effective Parameters: A Review [Volume 26, Issue 3, 2013, Pages 208-179]
-
Haghighatkish, M.
Developments in the Production of Man-made Fibers in Industry [Volume 3, Issue 4, 1990]
-
Haghighatkish, M.
Spiders: Silk Spinning and Properties [Volume 5, Issue 4, 1992]
-
Haghighatkish, M.
Capillary Water Transport In Yarns [Volume 8, Issue 2, 1995]
-
Haghighatkish, M.
Measurement of Textile Fibers Wettability and the Problems Involved [Volume 15, Issue 1, 2002]
-
Haghighatkish, M.
Mechanical Behavior of Needle-Punched Nonwoven Fabrics Made from Parallel Acrylic Staple Fibers [Volume 16, Issue 2, 2003]
-
Haghighi, M.Nekoomanesh
Methods for Determination of Monomers' Reactivity Ratios in Copolymers [Volume 8, Issue 2, 1995]
-
Haghir Madadi, Majid
Improvement in Ablation and Thermal Properties of Ultra-lightweight Silicone/Cork Composites Insulator Using Novolac Aerogel [Volume 30, Issue 6, 2018, Pages 517-529]
-
Haghshenas, Moslem
Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization [Volume 28, Issue 6, 2016, Pages 453-443]
-
Haghtalab, A.
Prediction of Viscoelastic Properties of Reinforced Epoxy/Unidirectional Glass Fiber Composite [Volume 11, Issue 1, 1998]
-
Haghtalab, A.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Hajhosseini, M.
Improvement in Char Formability of Phenolic Resin for Development of Carbon/Carbon Composites [Volume 21, Issue 2, 2008, Pages 127-132]
-
Haji Abdolrasouli, Mehdi
Effect of Organo-clay Modifier and Compatibilizer on the Morphological Development and Cold Crystallization Kinetics of Polylactide/Polyethylene/Montmorillonite Nanocomposites [Volume 31, Issue 3, 2018, Pages 251-264]
-
Haji Abdolrasouli, Mehdi
Bioplastic Nanocomposites Based on Polybutylene Succinate Adipate (PBSA)/Aminosilane Modified Nonocrystalline Cellulose: Structural, Thermal and Physical Properties [Volume 34, Issue 5, 2022, Pages 499-516]
-
Haji Abdolrasouli, Mehdi
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
-
Haji Bagherian, Mehdi
The Interdependence of Biodegradability, Morphology and Mechanical Properties in Polyolefin Elastomer/Starch Blends [Volume 31, Issue 1, 2018, Pages 69-79]
-
Haji Bagherian, Mehdi
Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications [Volume 33, Issue 6, 2021, Pages 525-535]
-
Haji Hosseini, M.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Hajian, M.
Investigation of Factors Affecting Slurry Copolymerization of Acrylonitrile - Vinylacetate for Preparation of Acrylic Fibers [Volume 14, Issue 1, 2001]
-
Hajian, Morteza
Preparation and Investigation of Mechanical Properties and Optical Clarity of Polyvinylbutyral Film [Volume 22, Issue 2, 2009, Pages 125-131]
-
Hajiebrahimi, M.
Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
-
Hajiheidari, D.
Synthesis of Functionalized Polymers [Volume 6, Issue 4, 1993]
-
Hajiheidari, D.
Application of Functionalized Polymers in Chemistry and Organic Synthesis [Volume 7, Issue 1, 1994]
-
Hajiheidari, D.
Polymeric Food Dyes [Volume 7, Issue 2, 1994]
-
Hajiheidari, D.
Application of Phenolic Resins in Refractories [Volume 9, Issue 1, 1996]
-
Hakim, S.
Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
-
Hakim, S.
Study of Ethylene Polymerization Kinetics by TiCl4/Mg(OC2H5)2 Catalyst and Determination of the Active
Sites Concentration [Volume 21, Issue 6, 2009, Pages 515-522]
-
Hakim, Sh.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Hakim, Shokoofeh
MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
-
Hakim, shokoufeh
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Hakim, Shokoufeh
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Hakimi, Mohsen
Barium Ferrite-containing Polymer Composite Magnets: Magnetic and Mechanical Properties [Volume 34, Issue 2, 2021, Pages 143-154]
-
Hamadanian, Masood
Optimization of Curing Conditions and Effect of Plasticizer Amount on the Mechanical and Thermal Properties of Epoxy Resin [Volume 33, Issue 6, 2021, Pages 479-495]
-
Hamedi Sangari, Hasan
Study on the Fouling Behavior of Polyethylene and Silica Nanoparticles Mixed Matrix Membranes in Filtration of Humic Acid Solution [Volume 29, Issue 4, 2016, Pages 347-363]
-
Hamishehkar, Hamed
Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
-
Hamishehkar, Hamed
Sodium Caseinate-Carrageenan Biopolymeric Nanocomplexes as a Carrier of Vitamin D: Study of Complex Formation, Particles Size and Encapsulation Efficiency [Volume 27, Issue 1, 2014, Pages 49-37]
-
Hamishekar, Hamed
Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property,
Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
-
Hamzeh, Y.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Hamzeh, Y.
Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
-
Hamzeh, Yahya
The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
-
Hamzeh, Yahya
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Hamzeh, Yahya
Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
-
Hamzeh, Yahya
Synthesis and Evaluation of Glyoxalated Polyacrylamide (GPAM) as a Wet and Dry-Strengthening Agent of Paper [Volume 27, Issue 2, 2014, Pages 129-121]
-
Hanifi, M.
An Investigation on the Behaviour of Disperse Dyes in Alkaline, Reducing and Alkaline-Reducing Media, Related to Dyeing and Printing of Polyester Goods [Volume 14, Issue 4, 2001]
-
Hanifi, Saeed
Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]
-
Harandi Najafi, J.
Reclaiming Rubber [Volume 4, Issue 1, 1991]
-
Harasi, N.
Tricalcium Phosphate Containing Sodium Hexametaphosphate as Polymer Suspension Stabilizer [Volume 21, Issue 5, 2009, Pages 401-408]
-
Harasi, Naser
Effective Parameters on Reaction Kinetics and Particle Size in the Suspension Polymerization of Styrene in the Presence of Graphite [Volume 33, Issue 2, 2020, Pages 137-146]
-
Hasan, Z.Mohammad
Investigation of the Mechanical Properties of Polyvinyl Alcohol Nanocomposite Hydrogels [Volume 17, Issue 5, 2005]
-
Hasani, Forough
Dextran/Bioactive Glass Nanocomposite Hydrogels:
Effect of Dextran Molecular Weight and Content on
Swelling Behavior and Structural Characteristics [Volume 34, Issue 3, 2021, Pages 249-265]
-
Hasani Moghaddam, Seyyed Hamid
Polymer Hydrogels Based on Acrylic Acid and Acrylamide and Their Applications to Remove Cationic Dye of Basic Red 46 (BR 46) from Aqueous Solutions [Volume 31, Issue 1, 2018, Pages 27-41]
-
Hasanvandi, Siavash
Preparation of a Novel Polymer-Complex Supported Iron (ΙΙΙ) and Study of Its Anti-Cancer Properties [Volume 36, Issue 2, 2023, Pages 167-176]
-
Hasanzade, Parya
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Hasanzadeh, Rezgar
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Hasanzadeh, Rezgar
Effect of Printer Process Parameters of Fused Filament Fabrication on the Tensile Strength and Density of Polylactic Acid/Nanoclay Nanocomposites [Volume 36, Issue 5, 2023, Pages 539-549]
-
Hashami, Z.
Study of Mass Transfer Phenomena in Rubber Sheets by Using Aromatic Solvents of Dichlorobenzene, Toluene and Benzene [Volume 15, Issue 1, 2002]
-
Hashemi, A.Bani
Synthesis and Studies of Tetrafluoroethylene Vinylalcohol Copolymer Derivatives [Volume 6, Issue 3, 1993]
-
Hashemi, S.A.
Synthesis and Characterization of Bisphenol A-glycidyl Methacrylate Monomer and Study of the Physical and Mechanical Properties of Its Dental Composite [Volume 15, Issue 5, 2003]
-
Hashemi, S.A.
Investigation of Silane Coupling Agent on Physical and Mechanical Properties of PVC/Cellulose (PVC/Pulp Paper) Fiber Composite [Volume 16, Issue 2, 2003]
-
Hashemi Najafabadi, S.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Hashemi Najafabadi, S.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Hashemi Sarvestani, Elham
Barium Ferrite-containing Polymer Composite Magnets: Magnetic and Mechanical Properties [Volume 34, Issue 2, 2021, Pages 143-154]
-
Hashemipour Rafsanjani, H.
Investigating Some Characteristics of Biocomposites Prepared from Chemically Purified Date Palm Fibers [Volume 23, Issue 6, 2011, Pages 467-474]
-
Hashempour, Mohammad
Thermoresponsive Membrane Based on Thermotropic Liquid Crystalline Cholesteryl - (L-lacticacid)n System: Study of Its Drug Permeability [Volume 25, Issue 5, 2013, Pages 365-373]
-
Hassan-Nejad, M.
Investigation of the Properties of Produced Blend Fibers from Modified PP with PET [Volume 13, Issue 1, 2000]
-
Hassan-Nejad, M.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
-
Hassan Ajili, S.
Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]
-
Hassanajili, Shadi
Preparation of Gas Sensor Based on Polymer Nanocomposite for Qualitative Detection of Hydrogen Sulfide [Volume 29, Issue 5, 2017, Pages 443-454]
-
Hassanajili, Shadi
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Hassannia Roodboneh, M.
Synthesis of Vinyl Chloride-vinyl Acetate Copolymer Through Batch Emulsion Polymerization [Volume 16, Issue 4, 2003]
-
Hassanpour, Fatemeh
Effects of Surface Microtopography on Wettability of Poly(dimethylsiloxane) Film: Superhydrophobicity [Volume 33, Issue 1, 2020, Pages 51-62]
-
Hassanpour, S.
Radiation Curing of UPEs/EP Resin System [Volume 8, Issue 2, 1995]
-
Hassanpour, S.
The Effect of Dibutyl Phthalate on Photostabilization of Polymethylmethacrylate [Volume 9, Issue 2, 1996]
-
Hassanpour, S.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Hatami, leila
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Hatami, Lila
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Hatami, mehdi
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Hatamzadeh, M.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Heidari, Ali Akbar
Polyethersulfone-MIL-53(Al) Nanoparticles Mixed Matrix Membranes for Separation of Aqueous Dye Solutions [Volume 34, Issue 4, 2021, Pages 387-402]
-
Heidari, Ali Akbar
Recent Advances in Polyolefin-Based Separators for Li-ion Battery Applications: A Review [Volume 34, Issue 5, 2022, Pages 423-442]
-
Heidari, Amin
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Hejazi, Sahab
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Hejazi, Sayyed Mahdi
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Hemmati, M.
Rheological Study of Polyethylene/Polypropylene Blends [Volume 13, Issue 4, 2000]
-
Hemmati, M.
Electrical Conductivity of Short Carbon Fibers and Carbon Black- Reinforced Chloroprene Rubber [Volume 15, Issue 3, 2002]
-
Hemmati, Mahmood
Compositional Determination of Vinyl Acetate/Vinyl Benzoate Copolymer by Fourier Transform Infrared Spectroscopy [Volume 27, Issue 6, 2015, Pages 422-413]
-
Hemmati Nejad, N.
A Review on the Application of Biotechnology in Textile: The Role of Enzymes [Volume 12, Issue 1, 1999]
-
Heydari, A.
Science and Technology of Prepregs [Volume 4, Issue 1, 1991]
-
Heydari, Ali
Modification of Poly(ether-b-amide) Membrane Properties Using Glycerol for CO2/N2 Gas Separation [Volume 31, Issue 5, 2019, Pages 461-474]
-
Heyran Ardakani, Hamid Reza
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Heyran Kahnamuei, Farnaz
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Hezarjaribi, Masoumeh
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Hojjati, Mahmoudreza
Preparation of Gas Sensor Based on Polymer Nanocomposite for Qualitative Detection of Hydrogen Sulfide [Volume 29, Issue 5, 2017, Pages 443-454]
-
Hojjati, Seyed Mahmoudreza
Preparation and Study on Properties of Superabsorbent Hydrogel Composite of Acrylamide-Acrylic Acid and Zeolite in Agricultural Uses [Volume 30, Issue 5, 2018, Pages 391-404]
-
Hojjati Emami, Sh.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Hojjatti, M.
Permeability Constant of Reinforcing Fabrics Used in Resin Transfer Moulding [Volume 11, Issue 4, 1998]
-
Homayoonfal, Maryam
Modification of Structural Properties of Nanocomposite Membranes for Improving Dye Separation from Textile Effluents [Volume 31, Issue 5, 2019, Pages 475-492]
-
Honarkar, H.
Production of PVC/ABS/NBR Blend and the Study of Its Physical and Mechanical Properties, Thermal Behaviour and its Morphology [Volume 14, Issue 3, 2001]
-
Honarkar, H.
Nanoclay Dispersion and its Effect on Properties of Waterborne Polyurethanes [Volume 26, Issue 5, 2014, Pages 401-393]
-
Honarkar, Hengameh
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Honarkar, Hengameh
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Hooshiar Sadegian, M.
The Role of Multi-wall Carbon Nanotubes on Fracture Mechanism of Epoxy Nanocomposite [Volume 21, Issue 5, 2009, Pages 417-430]
-
Hormozi, F.
Optimization of Chitin Extraction from Shrimp’s Shell and Chitosan Preparation: Study of Parameters Influence on Chitin Deacetylation Reaction and Biocompatibility Evaluation (In vitro) [Volume 15, Issue 1, 2002]
-
Hormozi, F.
Azeotropic Styrene-acrylonitrile Suspension Polymerization at Atmospheric Pressure [Volume 15, Issue 6, 2003]
-
Hormozi, F.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Hormozinejad, Mina
Physicochemical Characterization of Biopolymer Chitosan Extracted from Shrimp Shells [Volume 27, Issue 6, 2015, Pages 380-371]
-
Hoseini, M.
Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property,
Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
-
Hoseini, Mohammadyar
Study of Thermal Properties, Turbidity, Effective Factors on Particle Size and Oscillatory Rheology of Pectin-Caseinate Biopolymer Nanocomplexes [Volume 25, Issue 6, 2013, Pages 433-447]
-
Hoseini, Mohammadyar
Sodium Caseinate-Carrageenan Biopolymeric Nanocomplexes as a Carrier of Vitamin D: Study of Complex Formation, Particles Size and Encapsulation Efficiency [Volume 27, Issue 1, 2014, Pages 49-37]
-
Hoseini, Seyyed Anvar
Thermomechanical Properties of Nylon 6,6/Polyester Hybrid Tire Cord: Effect of Twist Level and Core Ratio [Volume 33, Issue 2, 2020, Pages 115-123]
-
Hoshiar, Sh.
Effect of Enzymatic Hydrolysis on the Weight Loss and Pilling of Cotton and Cotton/Polyester Fabrics [Volume 11, Issue 1, 1998]
-
Hossainnia, A.
Study on Morphology of Polypyrroles Prepared Electrochemically, Chemically and Its Polyacrylic Acid Composite [Volume 8, Issue 1, 1995]
-
Hossainnia, A.
Synthesis of a Polyester from 2-Dodecen-l-yl-succinic Acid as a Rust Inhibitor for Turbin Oil [Volume 9, Issue 1, 1996]
-
Hossein Khanli, H.
Processing of Linear Low Density Polyethylene Film (LLDPE) [Volume 7, Issue 1, 1994]
-
Hossein Khanli, H.
The Use of Fluoroelastomers in Processing of LLDPE Films [Volume 8, Issue 1, 1995]
-
Hossein Siadati, Seyyed Mohammad
Graphene Surface Treatment Effects on Mechanical Behavior of Basalt FibersEpoxy Composites [Volume 31, Issue 2, 2018, Pages 155-170]
-
Hosseinaei, O.
Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
-
Hosseini, Fereshteh
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Hosseini, Hadi
VVertical Electrospinning of UHMWPE/ZnO Nanocomposite Fibers at High Temperature [Volume 27, Issue 2, 2014, Pages 141-131]
-
Hosseini, S.A.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
-
Hosseini, S.A.
Investigation of Parameters Affecting the Productivity of Electrospun
Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]
-
Hosseini, S.K.
Improvement in Mechanical Properties of Cellulose Fibers-Thermoplastic
Polymer Composites [Volume 18, Issue 3, 2005, Pages 143-150]
-
Hosseini, S.M.
The Effect of Microwave Radiation on Dyeing of Polyester Fibers [Volume 13, Issue 2, 2000]
-
Hosseini, S.Z.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Hosseini, Sayed Mohsen
Fabrication and Investigation of Separation
Performance and Antifouling Properties of Mixed Matrix PES-Based Nanofiltration Membrane Containing Cobalt-Ferrite Nanoparticles [Volume 33, Issue 5, 2021, Pages 385-400]
-
Hosseini, Sayed Mohsen
Surface Modification of Nanofiltration Membrane Using Poly(vinyl alcohol) and Chitosan-Functionalized Activated Carbon Nanoparticles [Volume 34, Issue 4, 2021, Pages 349-358]
-
Hosseini, Sayed Mohsen
Fabrication of Bi-layer Polyethersulfone-based Nanofiltration Membrane Using Chitosan/Zeolite Nanocomposite Layer [Volume 36, Issue 4, 2024, Pages 393-407]
-
Hosseini, Sayed Mohsen
Fabrication and Surface Modification of PES-Based Nanofiltration Membrane Using Polymethyl Methacrylate/Graphene Oxide Nanoplates [Volume 36, Issue 5, 2023, Pages 551-565]
-
Hosseini, SayedMohsen
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Hosseini, Seid Mohammad
Dependence of Dielectric Constant and Mechanical Properties of Expanded Polystyrene Foam on Cell Wall Thickness [Volume 36, Issue 5, 2023, Pages 509-519]
-
Hosseini, seyed abdolkarim
Production and Characterization of Nanofibrous Yarn Containing Lignin and Feasibility Study of Its Use as a Drug Eluting Suture [Volume 35, Issue 2, 2022, Pages 111-125]
-
Hosseini, Seyed Hassan
Hydrolysis of Cellulose by Magnetic Poly(ionic liquid) Nanocatalyst Based on Poly(vinylimidazolium sulfonic acid) [Volume 31, Issue 4, 2018, Pages 307-318]
-
Hosseini, Seyed Mostafa
On the Mechanism of Physical Effects of Reinforcing Fillers in the Vulcanization Kinetics of Styrene-Butadiene-Rubber [Volume 31, Issue 5, 2019, Pages 447-460]
-
Hosseini, Seyed Mostaffa
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Hosseini, Seyed Mostaffa
Comparative Performance and Modification of Rubber and Reinforcing-Filler on the Tearing Resistance of Peroxide-Cured Natural-Rubber/Silica Compounds [Volume 35, Issue 5, 2023, Pages 487-500]
-
Hosseini, Seyed Saeed
Flexural Behavior of Sandwich Structures Consisting of Corrugated Composite Core with Different Geometries [Volume 28, Issue 3, 2015, Pages 187-175]
-
Hosseini, Seyed Saeid
The Importance and Influence of Rheological Properties of Polymer Solutions in Phase Inversion Process and Morphology of Polymeric Membranes [Volume 28, Issue 5, 2015, Pages 371-351]
-
Hosseini, Seyyed Mohsen
Surface Modification of Cation Exchange Membranes Using Chitosan-co-PANI/Graphene Oxide Nanocomposite Layer [Volume 31, Issue 5, 2019, Pages 435-446]
-
Hosseini Abbandanak, Seyyed Navid
Graphene Surface Treatment Effects on Mechanical Behavior of Basalt FibersEpoxy Composites [Volume 31, Issue 2, 2018, Pages 155-170]
-
Hosseini Bayan, S.M.
Study on Ethylene Polymerization by Active Ziegler?Natta Catalyst Based TiCl4 Supported on Mg(OEt)2 [Volume 10, Issue 3, 1997]
-
Hosseini Ravandi, S.A.
Production and Some Characteristics of Bulk Nanofibers Layers by Manipulation of Electrospinning System [Volume 21, Issue 4, 2008, Pages 307-313]
-
Hosseini Ravandi, S.A.
Evaluation of Surface Roughness of Polyacrylonitrile Nanowebs [Volume 21, Issue 1, 2008, Pages 61-69]
-
Hosseini Ravandi, S.Abdolkarim
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
-
Hosseini shiraz, S.S.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Hosseinipour, Amin
Bioplastic Nanocomposites Based on Polybutylene Succinate Adipate (PBSA)/Aminosilane Modified Nonocrystalline Cellulose: Structural, Thermal and Physical Properties [Volume 34, Issue 5, 2022, Pages 499-516]
-
Hosseinpour, Hamzeh
Fabrication and Investigation of Polyamine Thin Film Composite Membrane based on Poly(2,5-benzimidazole) with High Chemical Stability [Volume 31, Issue 6, 2019, Pages 551-561]
-
Hosseinzadeh, Hossein
Synthesis of Nanocomposite Hydrogels Based on Sodium Alginate for Effective Removal of Methylene Blue and Antibacterial Applications [Volume 31, Issue 2, 2018, Pages 186-202]
-
Hosseni, A.K.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Hossepian, M.
Investigation of Factors Affecting Slurry Copolymerization of Acrylonitrile - Vinylacetate for Preparation of Acrylic Fibers [Volume 14, Issue 1, 2001]
-
Hossienkhanli, H.
Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]
I
-
Imani, M.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
-
Imani, Mohammad
Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
-
Imani, Mohammad
Effect of Salt on Gelation Behavior of Injectable Nanocomposite Scaffold Based on Hydroxypropyl Methylcellulose and Hydroxyapatite/Tricalcium Phosphate Nanoparticles [Volume 27, Issue 2, 2014, Pages 109-99]
-
Imani, Mohammad
Rheology of Semi-Cured Silicone Rubber Compounds [Volume 27, Issue 3, 2014, Pages 259-251]
-
Imani, Mohammad
Effect of Interactions Between Anionic Vesicles and a Cationic Terpolymer in Concentrated Solution Regime: Morphology and Size Changes of the Vesicular Particles [Volume 29, Issue 1, 2016, Pages 3-14]
-
Imani, Mohammad
Temperature-Responsive Hydrogels: Materials, Mechanisms and Biological Applications [Volume 31, Issue 3, 2018, Pages 211-237]
-
Imani, Mohammad
Cyclic Olefin Copolymers: Superseding Glass Optical Characteristics with Plastics in Medical Devices [(Articles in Press)]
-
Iranmanesh, M.
Studying the Performance of Coal Tar Epoxy on ST37 Steel in Submerge Zone of Persian Gulf [Volume 20, Issue 4, 2007, Pages 349-359]
-
Islami, Zahra
Investigation of the Thermal Resistance of Phenolic Resin/Glass Fiber/Nanosilica Nanocomposites [Volume 31, Issue 4, 2018, Pages 359-371]
-
Ismail, A.F.
Thin Film Polyamide Membranes Containing Modified Manganese Dioxide Nanotubes for Removal of Sodium and Copper Ions [Volume 34, Issue 2, 2021, Pages 155-172]
-
Ismailipour, B.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, I: Effect of Pressure [Volume 16, Issue 3, 2003]
-
Ismailipour, B.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, II: Effect of Buffer and Emulsifier Concentration [Volume 16, Issue 4, 2003]
-
Isvand Rajabi, Shahrzad
Removal of Methyl Orange Dye from Aqueous Solution Using Bioadsorbent Modified with Polyaniline Nanofibers;
Isotherm, Kinetic and Thermodynamic Studies [Volume 35, Issue 5, 2023, Pages 435-453]
-
Iwanaga, Y.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Izadi, Mohsen
Preparation of Porous Thermoset Polyurethane with Supercritical CO2 as Non-solvent [Volume 28, Issue 2, 2015, Pages 109-101]
-
Izadi-Vasafi, Hossein
Effect of Graphene Oxide Nanoparticles on the Physical and Mechanical Properties of Chitosan/Gelatin/Polyvinyl Alcohol Films [Volume 33, Issue 1, 2020, Pages 75-87]
J
-
J, Morshedian
Effect of Aging on Mechanical Properties of EpoxyJR-Glass Composites [Volume 7, Issue 4, 1994]
-
J. Zohoorian-Mehr, M.
Comparative Thermal and Mechanical Study of Aromatic Tackifying Resins [Volume 13, Issue 1, 2000]
-
J. Zohourian Mehr, M.
Synthesis of an Epoxy Resin Having Anthracene Moiety: 1,4- Dihydroxytriptycene Instead of Bisphenol A [Volume 10, Issue 1, 1997]
-
Jabbari, E.
Effect of Hydrogel Content on Properties of a Composite Based on RTV Silicone Rubber on Matrix and Cross -linked Poly(acrylic acid) Particles as The Dispersed Phase [Volume 15, Issue 1, 2002]
-
Jabbari, E.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Jafari, Farid
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Jafari, Mostafa
Surface Modification of Indium Tin Oxide Nanoparticles to Improve Its Distribution in Epoxy-Silica Polymer Matrix [Volume 27, Issue 4, 2014, Pages 289-281]
-
Jafari, S.H.
Study on the Dynamic Rheological Behavior of Polyethylene Filled with Carbon Black [Volume 16, Issue 4, 2003]
-
Jafari, S.H.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Jafari, S.H.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Jafari, S.H.
Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
-
Jafari, S.H.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Jafari, S.H.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
-
Jafari, S.H.
An Investigation of Reactive Compatibilizer Effect on Thermal,
Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]
-
Jafari, Seyed Hassan
A Comparative Study on the Influence of Nanoalumina and Carbon Nanotubes on Thermal Stability, Adhesion Strength and Morphology of Epoxy Adhesives [Volume 27, Issue 6, 2015, Pages 369-361]
-
Jafari Onsor roodi, H.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Jafarifard, Samane
Effect of Hyperbranched Polymers on Curing Behavior of UV Curable Inks in Inkjet Printing [Volume 29, Issue 3, 2016, Pages 276-285]
-
Jafary, M.R.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Jafarzadeh, Yoones
Fabrication of ZSM-5 Zeolite Dispersed Polyethylene Membranes via Thermally Induced Phase Separation
Method [Volume 27, Issue 5, 2014, Pages 371-359]
-
Jafarzadeh, Yoones
The Effect of LiCl and Coagulation Bath Temperature on the Structure and Performance of PVDF Membranes [Volume 28, Issue 4, 2015, Pages 311-301]
-
Jafarzadeh, Yoones
Effects of TiO2 and ZnO Nanoparticles on the Structure and Fouling Behavior of Polyethylene Membranes [Volume 28, Issue 6, 2016, Pages 493-477]
-
Jafarzadeh, Yoones
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Jafarzadeh, Yoones
The Effects of Bore Fluid Composition and Coagulation Bath Temperature on the Structure and Performance of Polysulfone Hollow Fiber Membranes in Collagen Separation [Volume 29, Issue 6, 2017, Pages 559-570]
-
Jafarzadeh Haghighifard, Nematollah
Physicochemical Characterization of Biopolymer Chitosan Extracted from Shrimp Shells [Volume 27, Issue 6, 2015, Pages 380-371]
-
Jaffarian, A.
Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
-
Jah, R.Jam
Chemical Reactors [Volume 3, Issue 3, 1990]
-
Jahanara, Bijan
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Jahanbiglari, Maryam
Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]
-
Jahangard, Mohammad Javad
Surface Modification of PVDF-CTFE Hollow Fiber Membrane with Surface Modifying Macromolecules for Carbon Dioxide Absorption and Stripping [Volume 33, Issue 3, 2020, Pages 213-227]
-
Jahani, Mehran
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
-
Jahani, Y.
Ablative Materials [Volume 3, Issue 3, 1990]
-
Jahani, Y.
Cure and Decomposition Kinetics Determination of Polymers by Thermal Analysis [Volume 3, Issue 4, 1990]
-
Jahani, Y.
An Investigation on Cure Kinetics of Phenolic-Novolac Resins [Volume 5, Issue 1, 1992]
-
Jahani, Y.
Flame Retardant Hybrid System of Triphenyl Phosphate/Nanoclay in Evaluation of Flammability and Mechanical Properties of PC/ABS Compound [Volume 23, Issue 6, 2011, Pages 475-485]
-
Jahani, Yousef
Effect of Nucleating Agent Concentration on Non-Isothermal Melt Crystallization Kinetics of b-Nucleated Impact Polypropylene Copolymer [Volume 34, Issue 2, 2021, Pages 191-202]
-
Jahanshahi, Mohsen
Fabrication and Investigation of Polyamine Thin Film Composite Membrane based on Poly(2,5-benzimidazole) with High Chemical Stability [Volume 31, Issue 6, 2019, Pages 551-561]
-
Jahanzad, F.
Mathematical Model for Determination of Kinetic Behaviour of Styrene Polymerization [Volume 12, Issue 2, 1999]
-
Jalal, Razieh
Poly(styrene-alt-maleic anhydride) Conjugated with Spermine: Synthesis, Antibacterial Activity and Antibiotic Susceptibility [Volume 31, Issue 1, 2018, Pages 15-26]
-
Jalali, Kh.
Synthesis of PVC Organosol Lacquers for Internal Metal Can Coatings [Volume 12, Issue 2, 1999]
-
Jalali Arani, A.
Continuous Vulcanization for Extrusion Compounds [Volume 5, Issue 3, 1992]
-
Jalali Arani, A.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Jalali Arani, Azam
Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
-
Jalali Torshizi, H.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Jalayer, P.
Pyrolysis Gas Chromatography of Polymers [Volume 4, Issue 4, 1991]
-
Jalili, Kiyumars
Effects of Surface Microtopography on Wettability of Poly(dimethylsiloxane) Film: Superhydrophobicity [Volume 33, Issue 1, 2020, Pages 51-62]
-
Jalili, Kiyumars
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
-
Jalili, R.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
-
Jalili, R.
Investigation of Parameters Affecting the Productivity of Electrospun
Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]
-
Jalili Moghaddam, M.
Investigation in the Propetry Improvements of PE Solid Wastes [Volume 4, Issue 3, 1991]
-
Jalilian, Mehrdad
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Jalilian, S.M.
Synthesis of Vinyl Chloride-vinyl Acetate Copolymer Through Batch Emulsion Polymerization [Volume 16, Issue 4, 2003]
-
Jalilian, S.M.
Microstructural Study on Polyvinyl Chloride by One and Two Dimensional Nuclear Magnetic Resonance Spectroscopy Methods [Volume 23, Issue 4, 2010, Pages 311-321]
-
Jalilian, Seyed mehrdad
Polymerization Parameters of Methacrylic Acid Esters as Viscosity Index Improvers in Lubricants [Volume 32, Issue 2, 2019, Pages 123-134]
-
Jalilian, Seyed Mehrdad
Vinyl Chloride Emulsion Polymerization Reaction: Effect of Various Formulations [Volume 24, Issue 3, 2011, Pages 205-214]
-
Jalilian, Seyed Mehrdad
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Jalilian, Seyed Mehrdad
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Jalilnejad, Elham
Application of Hydrogels in Adsorptive Removal of Aqueous Pollutants [Volume 31, Issue 6, 2019, Pages 499-518]
-
Jamal Omidi, M.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
-
Jamal Omidi, Majid
The Impact Resistance of Fiber-Reinforced Polymer Composites: A Review [Volume 24, Issue 4, 2011, Pages 255-277]
-
Jamali Firouzabadi, Vahide
Triple Stimuli Responsive Poly(vinyl alcohol)Chitosan/Nanoclay/Nanosilver Nanocomposite Hydrogel [Volume 32, Issue 1, 2019, Pages 3-14]
-
Jamalpour, Seifollah
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Jamjah, R.
Study on Ethylene Polymerization by Active Ziegler?Natta Catalyst Based TiCl4 Supported on Mg(OEt)2 [Volume 10, Issue 3, 1997]
-
Jamjah, R.
Slurry Polymerization of Propylene Using High Activity Heterogeneous Ziegler-Natta Catalyst, MgCl2[Mg(OEt)2]/TiCl4/DNBP/TEA/DMDCHS [Volume 11, Issue 4, 1998]
-
Jamjah, R.
Study of Variation in Chemical Composition of EPDM Elastomers Synthesized with Ziegler-Natta Catalyst Based on Vanadium During Terpolymerization [Volume 16, Issue 5, 2004]
-
Jamshidbeigi, Shohreh
Nanomagnetic Hydrogels Based on Carboxymethylcellulose/Diatomaceous Earth Grafted with Acrylamide for Adsorption of Cationic Crystal Violet Dye [Volume 31, Issue 2, 2018, Pages 171-185]
-
Jamshidi, Ahmad
Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
-
Jamshidi, Hajar
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Jamshidi, Hajar
Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
-
Jamshidi, Hajar
Role of Polymers in Developing Phase Change Materials for Energy Storage: A Review on Encapsulation Methods and Their Applications [Volume 33, Issue 3, 2020, Pages 179-212]
-
Jamshidi, Hajar
Biobased Acids in Production of Hybrid Superabsorbent Polymer Hydrogels: A Review [Volume 34, Issue 3, 2021, Pages 207-231]
-
Jamshidi, Hajar
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Jamshidi, Hajar
Unsaturated Polyester Resin Nanocomposites: An Overview [Volume 36, Issue 4, 2024, Pages 327-363]
-
Jamshidi Kaljahi, Nasrin
Plasticized Starch Based Bionanocomposites Containing Cellulose Nanowhiskers and Titanium Dioxide Nanoparticles: Study of Structure and Water Vapor Permeability [Volume 27, Issue 3, 2014, Pages 192-179]
-
Janani, H.
Production of Polystyrene Open-celled Microcellular Foam in Batch Process by Super Critical CO2 [Volume 23, Issue 3, 2010, Pages 223-234]
-
Janghamsari, Yousef
Preparation and Evaluation of Polymer Aerogel
Adsorbents Based on Polyacrylonitrile Fibers to
Remove Oil Contaminants from Seawater [Volume 34, Issue 3, 2021, Pages 299-311]
-
Javad Mokhtari Aliabad, Javad
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Javadi, Azizeh
Biodegradable Poly(lactic acid)/Poly(butylene adipate-co-terephthalate) Nanocomposite [Volume 36, Issue 1, 2023, Pages 87-101]
-
Javadi, Seyed Mohamad
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Javanbakht Ghahfarokhi, Sanazgoli
Thermomechanical Properties of Poly(ethylene oxide)/Nanochitin Nanocomposite Prepared by Mechanical Method [Volume 30, Issue 3, 2017, Pages 247-254]
-
Javedani Bafekr, Jalil
Poly(styrene-alt-maleic anhydride) Conjugated with Spermine: Synthesis, Antibacterial Activity and Antibiotic Susceptibility [Volume 31, Issue 1, 2018, Pages 15-26]
-
Javid, Mahsa
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Javidi, Ailin
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Jaymand, Mehdi
Preparation and Characterization of Hyperbranched Polystyrene Nanocomposite Synthesized by Living Radical Polymerization and Solution Intercalation Method [Volume 24, Issue 6, 2012, Pages 433-443]
-
Jaymand, Mehdi
Synthesis and Characterization of Copolymer Poly(propylene-co-styrene) Grafted-Multiple-walled Carbon Nanotubes by Nitroxide-mediated Living Radical Polymerization and Solution Intercalation Method [Volume 33, Issue 5, 2021, Pages 401-417]
-
Jaymand, Mehdi
Conductive Nanofibrous Scaffolds Based on Tragacanth Gum, Polyaniline, and Poly(vinyl alcohol): Fabrication, Characterization and Exploring
Their Potential Application in Skin Tissue Engineering [Volume 36, Issue 3, 2023, Pages 259-279]
-
Jiriaei Sharahi, Zahra
Fabrication of Bi-layer Polyethersulfone-based Nanofiltration Membrane Using Chitosan/Zeolite Nanocomposite Layer [Volume 36, Issue 4, 2024, Pages 393-407]
-
Joghataie, Mohammad Taghi
Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
-
Johari, M.S.
Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
-
Jolaei, M.
Structure Modification of Polyester 3-Deminsional Fabrics with β-Cyclodextrin and Citric Acid [Volume 21, Issue 4, 2008, Pages 297-305]
-
Joorabloo, Ali Reza
Functionality Effect of Acrylic Pressure Sensitive Adhesive Formulations on Release Performance and Adhesion Properties of Stimulants in
an Adhesive Patch [Volume 24, Issue 6, 2012, Pages 493-503]
-
Jowdar, Effat
Nano Clay Effect on Morphology, Mechanical Properties and Water Absorption of Vinyl Ester-Based Nanocomposites [Volume 24, Issue 2, 2011, Pages 83-92]
-
Jozaghkar, Mohammad Reza
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Jozaghkar, Mohammad Reza
Kinetics of High-Temperature Bulk Thermal Polymerization of Methyl Styrene [Volume 32, Issue 3, 2019, Pages 225-238]
-
Jozaghkar, Mohammadreza
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
K
-
K., M.
Reclaiming Rubber [Volume 4, Issue 1, 1991]
-
Kabiri, E.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Kabiri, K.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Kabiri, K.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Kabiri, Koroush
Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
-
Kabiri, Kourosh
Cross-linking of Poly(sodium acrylate)-Based Hydrogels by a Non-vinyl Cross-linker [Volume 29, Issue 2, 2016, Pages 185-196]
-
Kabiri, Kourosh
Conversion of Lignocellulosic Bagasse Biomass into Hydrogel [Volume 29, Issue 5, 2017, Pages 455-467]
-
Kabiri, Kourosh
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
-
Kabiri, Kourosh
Biobased Acids in Production of Hybrid Superabsorbent Polymer Hydrogels: A Review [Volume 34, Issue 3, 2021, Pages 207-231]
-
Kabiri Badr, M.
Application of Aqueous Polymer Systems in Biotechnology [Volume 7, Issue 4, 1994]
-
Kaffashi, B.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
-
Kaffashi, Babak
Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]
-
Kafi, Mohamadreza
Preparation and Evaluation of Polymer Aerogel
Adsorbents Based on Polyacrylonitrile Fibers to
Remove Oil Contaminants from Seawater [Volume 34, Issue 3, 2021, Pages 299-311]
-
Kak Savandi, A.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Kalaee, M.R.
Prediction of Optimum Time for Oxygen Clearance in Solution
Polymerization of Vinyl Acetate in Isopropyl Alcohol [Volume 20, Issue 2, 2007, Pages 101-108]
-
Kalaee, Mohammad Reza
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Kalaie, Mohammad Reza
Steady State Simulation of Two-Gas Phase Fluidized Bed Reactors in Series for Producing Linear Low Density Polyethylene [Volume 24, Issue 4, 2011, Pages 301-316]
-
Kalhori, H.
Preparation of Conductive Polyaniline/Silica Composite [Volume 9, Issue 1, 1996]
-
Kalteh, N.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Kamakani, Z.
Optimization of Cost-properties in Production of a General Purpose Conveyer Belt Using Taguchi Method with Overall Evaluation Criteria Method [Volume 18, Issue 3, 2005, Pages 135-142]
-
Kamal, M.R.
Effects of Different Types of Clays and Maleic Anhydride Modified Polystyrene on Polystyrene/Clay Nanocomposites [Volume 22, Issue 2, 2009, Pages 151-157]
-
Kamalipour, Jamshid
Flame Retardant Compounds for Epoxy Resins: A Review [Volume 34, Issue 1, 2021, Pages 3-27]
-
Kamelaei, Edris
Preparation of Antibacterial Polyvinylcholoride-Zno Nanocomposite with Improved Mechanical Properties Using Taguchi Experimental Design [Volume 28, Issue 5, 2015, Pages 383-373]
-
Karabi, M.
A Parametric Study on Rubber to Steel-cord Adhesion for the Belt Section of Low Aspect Ratio Radial Passenger Car Tires [Volume 15, Issue 1, 2002]
-
Karabi, Mohammad
Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
-
Karabi, Mohammad
Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticle Functionalization [Volume 27, Issue 5, 2014, Pages 394-383]
-
Karabi, Mohammad
Correlation between Microstructure and Rheological Properties of Broad Molecular Weight Distribution High Density Polyethylenes [Volume 28, Issue 1, 2015, Pages 38-27]
-
Karabi, Mohammad
Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene)/ Modified Thermoplastic Starch Blends [Volume 29, Issue 4, 2016, Pages 311-321]
-
Karabi, Mohammad
Shear-Induced Crystallization of Poly(lactic acid)/Graphene Nanocomposite [Volume 29, Issue 5, 2017, Pages 415-427]
-
Karabi, Mohammad
The Interdependence of Biodegradability, Morphology and Mechanical Properties in Polyolefin Elastomer/Starch Blends [Volume 31, Issue 1, 2018, Pages 69-79]
-
Karami, Milad
Polyethersulfone-MIL-53(Al) Nanoparticles Mixed Matrix Membranes for Separation of Aqueous Dye Solutions [Volume 34, Issue 4, 2021, Pages 387-402]
-
Karami, Milad
Recent Advances in Polyolefin-Based Separators for Li-ion Battery Applications: A Review [Volume 34, Issue 5, 2022, Pages 423-442]
-
Karami, Sahar
Fabrication of Bi-layer Polyethersulfone-based Nanofiltration Membrane Using Chitosan/Zeolite Nanocomposite Layer [Volume 36, Issue 4, 2024, Pages 393-407]
-
Karami, Zeinab
A Novel Ultra-High Swelling Organogel: An Epoxy Resin Derived Gelator for Alcohols and Polar Organic Liquids [Volume 33, Issue 4, 2020, Pages 315-328]
-
Karami Ghahi, M.
Study of Room Temperature Curing of Phenolic Resin and Its Silica Reinforced Composites [Volume 21, Issue 2, 2008, Pages 149-155]
-
Karbasi, S.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
-
Karbasizadeh, M.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
-
Kargari, A.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Kargari, Ali
Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk [Volume 27, Issue 1, 2014, Pages 78-63]
-
Kargari, Ali
CO2/N2 Gas Separation Using Nanocomposite Membranes Comprised of Ethylene-Propylene-Diene Monomer/Multi-Walled Carbon Nanotube (EPDM/MWCNT) [Volume 28, Issue 3, 2015, Pages 224-211]
-
Kargari, Ali
Preparation of Ethylene Vinyl Acetate/Zeolite 4A Mixed Matrix Membrane for CO2/N2 Separation [Volume 29, Issue 3, 2016, Pages 231-247]
-
Kargari, Ali
Preparation and Characterization of a Cross-linked Matrimid/Polyvinylidene Fluoride Composite Membrane for H2/N2 Separation [Volume 29, Issue 6, 2017, Pages 505-517]
-
Kargozar, Saeed
Fabrication of Nanofibrous Hybrid Scaffolds from Polylactic Acid-Graphene and Gelatin for Application in Bone Tissue Engineering [Volume 31, Issue 6, 2019, Pages 563-574]
-
Karimi, A.H.
Analytical and Numerical Studies of the Effect of Impact Forces on Polymer/Clay Nanocomposites [Volume 23, Issue 3, 2010, Pages 235-245]
-
Karimi, Farnoosh
Atom Transfer RaAtom Transfer Radical Polymerization of Methyl Methacrylate Using Bis(2-dodecylsulfanyl-ethyl)-Amine/Copper Bromide: Kinetic Study [Volume 31, Issue 2, 2018, Pages 143-154]
-
Karimi, M.
Some Properties of Polyamide 6 Fibers Produced by Wet-spinning [Volume 15, Issue 2, 2002]
-
Karimi, M.
Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]
-
Karimi, Majid
Dispersion of Glycidyl POSS-modified Silica Nanoparticles in Epoxy [Volume 34, Issue 2, 2021, Pages 131-142]
-
Karimi, Meysam
Evaluation of Polymer Wettability Alteration and Adsorption of Modified Silica Nanoparticles for Enhanced Oil Recovery [Volume 33, Issue 3, 2020, Pages 272-285]
-
Karimi, Mohammad
Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk [Volume 27, Issue 1, 2014, Pages 78-63]
-
Karimi, Mohammad
Electrospinning of Nano-Porous Cellulose Acetate Fibers Under Humidified Condition [Volume 28, Issue 6, 2016, Pages 504-495]
-
Karimi, Mohammad
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
-
Karimi, Mohammad
Thermomechanical Properties of Nylon 6,6/Polyester Hybrid Tire Cord: Effect of Twist Level and Core Ratio [Volume 33, Issue 2, 2020, Pages 115-123]
-
Karimi, Mohammad
High-Speed Melt Spinnability, Structural and Physical Properties of a Low Melting Copolyester Multifilament Yarn [Volume 36, Issue 5, 2023, Pages 521-537]
-
Karimi, Reza
Mechanistic Evaluation of Silane-spacer Length on Dynamic and Tribological Behavior of SBR-Modified Silica Rubber Composite [Volume 30, Issue 6, 2018, Pages 489-500]
-
Karimi, Samira
Optimization of Gas Barrier Properties of Nanocomposites of HDPE/Nanoclay Using
Response Surface Methodology [Volume 33, Issue 1, 2020, Pages 25-39]
-
Karimi Khozani, Ghadamali
Synthesis of Plate-Like Nanoalumina and Its Effect on Gas Permeability of Carbon Fiber Epoxy Composite [Volume 30, Issue 1, 2017, Pages 43-51]
-
Karimzad Ghavidel, Ayub
Experimental Study on Oriented Mechanical, Rheological and Optical of a Multi-Walled Carbon Nanotube/Polymethyl Methacrylate Anisotropic Nanocomposite [Volume 29, Issue 3, 2016, Pages 249-263]
-
Karimzad Ghavidel, Ayub
Fabrication of Ultrasensitive Bio-Nanosensor Based on Polypyrrole/Graphene Nanocomposite [Volume 34, Issue 6, 2022, Pages 579-595]
-
Karimzadeh, Saeed
Experimental Comparison of the Effect of Microtalc and Nanoclay on the Structural Properties of Polyethylene Foams Fabricated by Rotational Molding [Volume 35, Issue 1, 2022, Pages 81-90]
-
Karrabi, M.
Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
-
Karrabi, Mohammad
Multiscale Modeling of Mechanical Properties of Green Tire Tread Compound [Volume 36, Issue 2, 2023, Pages 177-189]
-
Kasiri, N.
Analysis of the Parameters Affecting the Behaviour of Flexible Fibers in Power Law Fluid Flow Field in a Uniform Circular Pipe [Volume 14, Issue 4, 2001]
-
Kasiri Beedhendi, N.
Mathematical and Computational Modeling of Dynamic of Flexible Fibers in Suspension [Volume 12, Issue 2, 1999]
-
Kasiriha, S.M.
Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
-
Kasra Kermanshahi, R.
Study on Inhibition of Biological Deterioration of a Type of Polyurethane Binder by Using Some Chemical Agents [Volume 15, Issue 3, 2002]
-
Katbab, A..A.
The Heat Transfer in Rubber Vulcanization [Volume 1, Issue 1, 1988]
-
Katbab, A.A
Electrical Conductivity of Short Carbon Fibers and Carbon Black- Reinforced Chloroprene Rubber [Volume 15, Issue 3, 2002]
-
Katbab, A.A.
Improvement in Bio and Water Compatibility by γ-Radiation Induced Surface Graft Copolymerization of NVP, HEMA and AAm onto EPDM Rubber [Volume 5, Issue 4, 1992]
-
Katbab, A.A.
Surface Modification of EPR as Biomaterial by Laser Induced Graft Copolymerization of AAm, HEMA and NVP: II- HEMA and NVP [Volume 7, Issue 3, 1994]
-
Katbab, A.A.
Effects of Gamma Radiation on Polymeric Materials of Disposable Medical Supplies at Sterilizing Doses [Volume 7, Issue 3, 1994]
-
Katbab, A.A.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
-
Katbab, A.A.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Kavousian, A.
Using Different Methods to Determine Monomer Reactivity Ratios in Styrene/Acrylonitrile Copolymer [Volume 12, Issue 1, 1999]
-
Kavussi, A.
Improving Bitumen Properties by Polymeric Materials [Volume 15, Issue 2, 2002]
-
Kazemi, A.
Application of Phenolic Resins in Refractories [Volume 9, Issue 1, 1996]
-
Kazemi, A.
Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
-
Kazemi, Ali
Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
-
Kazemi, Mojtaba
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Kazemi, Shahin
High-Speed Melt Spinnability, Structural and Physical Properties of a Low Melting Copolyester Multifilament Yarn [Volume 36, Issue 5, 2023, Pages 521-537]
-
Kazemi Najafi, S.
A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
-
Kazemi Najafi, S.
The Effects of Filler Content and Water Absorption on Creep Behavior of HDPE Waste/MDF Flour Composites [Volume 21, Issue 1, 2008, Pages 53-59]
-
Kazemi Najafi, S.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
-
Kazemi Najafi, S.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Kazemian, Naeimeh
A PSf/Amino Acid-Modified Montmorillonite Mixed Matrix Membrane for Arsenic Removal from Water: Preparation and Evaluation of Its Properties [Volume 30, Issue 1, 2017, Pages 75-88]
-
Kazemifard, Sholeh
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Kazemnejad Lili, A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Kermani, Z.
Surface Modification of Silicone Elastomer to Increase Hydrophobicity [Volume 16, Issue 3, 2003]
-
Kermanshahi, K.
Study of Ultraviolet (UV) Effect on Stabilization of Polyurethane Against Bacterial Deterioration [Volume 12, Issue 3, 1999]
-
Kermanshahi, R.K.
Biodegradation of Polyurethanes by Fungi [Volume 6, Issue 4, 1993]
-
Keshavarz, Ali
Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
-
Keshavarz Ghasemi, Atieh
Controlled Release of Indomethacin from Smart Starch-Based Hydrogels Prepared Acrylic Acid and b-Cyclodextrin as a Nanocarrier [Volume 29, Issue 6, 2017, Pages 495-504]
-
Keshavarz Mirza-Mohamadi, Hasan
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Keshmirizadeh, elham
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
-
Keshvari, Hamid
Optimization of Polyurethane Scaffolds by Taguchi Design of Experiments for Vascular Tissue Engineering Applications [Volume 33, Issue 5, 2021, Pages 419-433]
-
Keyanpour, M.
Initial Study of Energy Transfer in Phthalocyanine -Mesoporphyrin-Styrene Copolymer [Volume 8, Issue 1, 1995]
-
Keyanpour, M.
Synthesis of a Polyester from 2-Dodecen-l-yl-succinic Acid as a Rust Inhibitor for Turbin Oil [Volume 9, Issue 1, 1996]
-
Keyanpour, M.
Application of Polymeric Binders in Ceramic Processing [Volume 9, Issue 2, 1996]
-
Keyanpour-Rad, M.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Keyhanpour, Ali
Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
-
Keyvan Rad, Jaber
Preparation of Photoresponsive Functionalized Acrylic Nanoparticles Containing Carbazole Groups for Smart Cellulosic Papers [Volume 30, Issue 5, 2018, Pages 435-446]
-
Kh. Pourabbas, B.
Electropolymerization of Thiophenes and Some of its Derivatives [Volume 5, Issue 3, 1992]
-
Khabiri, Mohammad
Effect of Cell Morphology on Energy Absorption of Nitrile Rubber Foam [Volume 33, Issue 6, 2021, Pages 497-507]
-
Khademeh Molavi, Fatemeh
Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
-
Khademian, M.
Preparation of Polypyrrole and Its Composites in Various Solutions Using Different Additives and Studying the orphology and Conductivity of the Prepared Film [Volume 19, Issue 2, 2006, Pages 131-136]
-
Khademian, Mohsen
Colloidal Preparation of Polyaniline-Poly(vinyl alcohol) - SiO2 Nanocomposite and Study of its Anti-corrosive Properties [Volume 28, Issue 1, 2015, Pages 46-39]
-
Khademzadeh Yeganeh, Jafar
Controlling the Kinetics of Spinodal Decomposition in LCST PS/PVME Blends in Presence of Spherical Nanoparticles [Volume 28, Issue 4, 2015, Pages 288-277]
-
Khademzadeh Yeganeh, Jafar
Effect of Nanocellulose on Phase Behavior of off-Critical PS/PVME Blend [Volume 30, Issue 6, 2018, Pages 531-545]
-
Khademzadeh Yeganeh, Jafar
Effect of Thermally-Reduced Graphene Nanoparticles on the Electromagnetic Interference Shielding Performance, Rheological Behavior and Thermal Stability of PP/PET Blend [Volume 31, Issue 4, 2018, Pages 319-330]
-
Khademzadeh Yeganeh, Jafar
A Highly Toughened Poly(lactic acid)/Ethylene-co-Vinyl Acetate Blend with the Simultaneous Addition of Hydrophobic Nanoparticles and Compatibilizer [Volume 33, Issue 6, 2021, Pages 509-524]
-
Khademzadeh Yeganeh, Jafar
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Khaghanipour, Maryam
Modified Silane Polymer Adhesive: Effect of Aluminum
Substrate Treatment Methods and the Adhesive
Thickness on Adhesive Durability and Joint Strength [Volume 34, Issue 1, 2021, Pages 43-54]
-
Khajavi, Ramin
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Khajeh-Amiri, Alireza
Fabrication of Electrospun Fibers Containing Ternary Eutectic Fatty Acid Mixture as Phase-Change Materials for Application in Textiles [Volume 32, Issue 2, 2019, Pages 135-143]
-
Khakvand, Shayesteh
Effects of Surface Microtopography on Wettability of Poly(dimethylsiloxane) Film: Superhydrophobicity [Volume 33, Issue 1, 2020, Pages 51-62]
-
Khakzad, Fahimeh
Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
-
Khalafi, Hamid Reza
Relationship Between the Process Parameters and Resin Content of a Glass/Epoxy Prepreg Produced by Dipping Method [Volume 27, Issue 6, 2015, Pages 402-391]
-
Khalaj, Ebrahim
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
-
Khaleghi Sarnamy, M.
Effect of Volatile Fatty Acids in Production of Polyhydroxyalkanoates by Activated Sludge [Volume 21, Issue 1, 2008, Pages 83-90]
-
Khalili, H.
The Effect of Microwave Radiation on Dyeing of Polyester Fibers [Volume 13, Issue 2, 2000]
-
Khalili, H.
The Study of Dyeing of Hydrolyzed Polyester Fibers: Investigation of Dyeing Behaviour of Hydrolyzed Polyester Fibers by Lipase [Volume 14, Issue 2, 2001]
-
Khalili, S.M.R.
Properties and Behaviour of Hybrid Composites (FML) of Reinforced Polyester with Glass Fibers & Aluminium (GLALL)- An Experimental Study [Volume 14, Issue 5, 2002]
-
Khalili, S.M.R.
The Analysis of Static and Dynamic Stresse, Natural Frequencies and Failure of Composite and Metallic Bicycle Frames by Using Bicycle Frames by Using Bicycle Frames by Using Finite Element Method [Volume 15, Issue 3, 2002]
-
Khalili Moghamir, V.
Modelling of the Indentation Behaviour of Thermoplastic Honeycomb Sandwich Panels [Volume 21, Issue 2, 2008, Pages 157-166]
-
Khalilinejad, Iman
Preparation of Ethylene Vinyl Acetate/Zeolite 4A Mixed Matrix Membrane for CO2/N2 Separation [Volume 29, Issue 3, 2016, Pages 231-247]
-
Khalkhali Zavih, T.
Effect of Surface Chlorination on Friction Reduction in RubberWiper Blades [Volume 19, Issue 5, 2007]
-
Khalkhali Zavih, T.
Die Design for Polyethylene Foam Extrusion with Azodicarbonamide as Foaming Agent [Volume 20, Issue 1, 2007]
-
Khamforoush, M.
Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
-
Khamforoush, Mehrdad
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
-
Khamforoush, Mehrdad
Synthesis of TiO2 Composite Nanofibers Doped with
Copper Oxide Nanoparticles through Electrospinning and Their Application in Photocatalytic Degradation of Pharmaceutical Wastewaters [Volume 33, Issue 6, 2021, Pages 465-478]
-
Khanlari, Tayebe
Optimization of Factors Affecting the Synthesis of Polypropylene Glycol/Polyglycidyl Nitrate/
Polypropylene Glycol Triblock Copolymer and
Evaluation of Its Thermal Properties [Volume 33, Issue 1, 2020, Pages 63-73]
-
Kharrat, R.
Effect of DRISPAC Polymer on the Rheological Behaviour of Drilling Mud [Volume 13, Issue 2, 2000]
-
Khatibi, M.A.
The Effect of a- Cellulose Fiber on the Properties of Melamine-Formaldehyde Molding Compounds [Volume 14, Issue 1, 2001]
-
Khavanin, A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Khavaran, B.
Preparation of Conductive Membranes Using Polypyrrole [Volume 15, Issue 6, 2003]
-
Khayyatan, F.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Khazaeian, Aboulghasem
Studying the Properties of Polyvinyl Alcohol/Cellulose Nanofiber/Hydroxyapatite Hybrid Nanocomposite [Volume 28, Issue 2, 2015, Pages 99-91]
-
Khazaie, Ardeshir
Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
-
Khazini, Leila
Effective Parameters on the Formation of Natural
Zeolite-Based Granules to Remove Cationic Dyes
from Contaminated Water [Volume 34, Issue 3, 2021, Pages 267-279]
-
Kheirandish, S.
Effect of Hydrogel Content on Properties of a Composite Based on RTV Silicone Rubber on Matrix and Cross -linked Poly(acrylic acid) Particles as The Dispersed Phase [Volume 15, Issue 1, 2002]
-
Khezri, Khezrollah
Atom Transfer Radical Polymerization of Styrene in Presence of Mesoporous Silica Nanoparticles: Application of Reverse, Simultaneous Reverse and Normal Initiation Techniques [Volume 27, Issue 1, 2014, Pages 90-79]
-
Khezri, Khezrollah
Synthesis of Polystyrene/MCM–41 Nanocomposites through AGET ATRP and ARGET ATRP [Volume 28, Issue 3, 2015, Pages 255-243]
-
Khodami, A.
The Effects of Time, Temperature, Concentration of Enzyme and Fuzz on Weight Loss in Biopolishing of Cotton Fabrics [Volume 10, Issue 4, 1997]
-
Khodami, A.
Effect of Enzymatic Hydrolysis on the Weight Loss and Pilling of Cotton and Cotton/Polyester Fabrics [Volume 11, Issue 1, 1998]
-
Khodami, A.
The Study of Dyeing of Hydrolyzed Polyester Fibers: Investigation of Dyeing Behaviour of Hydrolyzed Polyester Fibers by Lipase [Volume 14, Issue 2, 2001]
-
Khodaparast Haghi, Akbar
Determination of Morphological and Microstructural Properties of Polyacrylonitrile/Single-Walled Carbon Nanotubes Composite Nanofibers [Volume 27, Issue 4, 2014, Pages 279-267]
-
Khoddami, A.
Biopolishing of Cotton Fabrics in Enzymatic Desizing Process [Volume 11, Issue 4, 1998]
-
Khoddami, A.
Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes [Volume 15, Issue 3, 2002]
-
Khoddami, Akbar
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Khoee, Sepideh
An Overview on Synthesis and Functionalization of Mesoporous Silica and Its Application in Drug Delivery [Volume 29, Issue 3, 2016, Pages 201-229]
-
Khojastepour, Mehdi
Pyrolysis of Bioplastics Based on Bovine Gelatin-Potato Flour and Whey Protein-Potato Flour Blends and Their
Kinetics and Thermodynamic Analysis [Volume 31, Issue 6, 2019, Pages 575-592]
-
Kholghi, Amir
Polystyrene Porous Films Prepared by Non-solvent Induced Phase Separation Process: Structure-Thermodynamic Parameters Relationship” [Volume 34, Issue 4, 2021, Pages 403-415]
-
Khonakdar, H.A.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Khonakdar, H.A.
Study on the Dynamic Rheological Behavior of Polyethylene Filled with Carbon Black [Volume 16, Issue 4, 2003]
-
Khonakdar, H.A.
Evolution of Co-continuous Morphology along the Screw Length in a Co-rotating Twin-screw Extruder and Its Effect on Impact Strength of Compatibilized PA6/ABS Blend [Volume 23, Issue 1, 2010, Pages 41-52]
-
Khonakdar, H.A.
Assessment of Melt Rheological Behavior of PTT/PE and PTT/PA 12 Blends by Emulsion and Micromechanical Models [Volume 22, Issue 5, 2010, Pages 399-407]
-
Khonakdar, H.A.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
-
Khonakdar, H.A.
An Investigation of Reactive Compatibilizer Effect on Thermal,
Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]
-
Khonakdar, Hossein Ali
Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]
-
Khonakdar, Hossein Ali
A Comparative Study on the Influence of Nanoalumina and Carbon Nanotubes on Thermal Stability, Adhesion Strength and Morphology of Epoxy Adhesives [Volume 27, Issue 6, 2015, Pages 369-361]
-
Khonakdar, Hossien Ali
Comprehensive Study on Thermal and Dynamic Mechanical Behavior of PET/PEN Blends [Volume 26, Issue 4, 2013, Pages 316-303]
-
Khorasani, M.
Novel Synthesis of Water-reducible Alkyd Resin with High Hydrolytic Stability [Volume 19, Issue 4, 2006]
-
Khorasani, M.M.
Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]
-
Khorasani, M.T.
Evaluation of Effective Parameters on Cold Duration in Cryoaccumulator Gels [Volume 15, Issue 6, 2003]
-
Khorasani, M.T.
Surface Modification of Silicone Elastomer to Increase Hydrophobicity [Volume 16, Issue 3, 2003]
-
Khorasani, M.T.
Fabrication of Porous Scaffolds from Poly(D,L-lactic acid) by Liquid-Liquid Phase Separation [Volume 21, Issue 6, 2009, Pages 495-501]
-
Khorasani, Zeinab
Effect of Cationic Starch and Chitosan on Dry Strength of Bleached Soda Pulps Made of Pre-Extracted and Non-Extracted Bagasse [Volume 25, Issue 5, 2013, Pages 383-392]
-
Khorsand, Hamid
Effect of Alumina Nanoparticles on the Rheological Behavior of Aluminum-Binder Mixtures for Powder Injection Molding [Volume 27, Issue 4, 2014, Pages 324-313]
-
Khoshmanzar, Maryam
Sodium Caseinate-Carrageenan Biopolymeric Nanocomplexes as a Carrier of Vitamin D: Study of Complex Formation, Particles Size and Encapsulation Efficiency [Volume 27, Issue 1, 2014, Pages 49-37]
-
Khoshniat, A.R.
Electrical Conductivity of Short Carbon Fibers and Carbon Black- Reinforced Chloroprene Rubber [Volume 15, Issue 3, 2002]
-
Khoshniyat, A.R.
Studies on the Rheological Behavior of Compatibilized HIPS/HDPE Blends [Volume 17, Issue 1, 2004]
-
Khoshsima, H.
Photorefraction in Polymers [Volume 9, Issue 1, 1996]
-
Khosravi, M.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Khosravi, M.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Khosravi, Yasamin
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Khosroshahi, A.
Structural and Physical Properties of Filament Yarns Melt-Spun from PP/LDPE Blend Before and After False-Twist Texturing [Volume 21, Issue 1, 2008, Pages 9-18]
-
Khosrowshahi ASL, A.
Quality Evaluation of Chitin and Chitosan Extracted from Cyst Shell of the Artemia Urmiana and its Comparison with Other Type from Shrimp and Crab’s Shell [Volume 16, Issue 2, 2003]
-
Khoylou, F.
Effects of Gamma Radiation on Polymeric Materials of Disposable Medical Supplies at Sterilizing Doses [Volume 7, Issue 3, 1994]
-
Khoylou, F.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Khoylou, F.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
-
Kiani, Gholamreza
Fabrication of Ultrasensitive Bio-Nanosensor Based on Polypyrrole/Graphene Nanocomposite [Volume 34, Issue 6, 2022, Pages 579-595]
-
Kianpoor, M.
Synthesis of Polynaphthylethylene as Pour Point Depressant for Lubricating Oils from Polyethylene Wax Obtained from Polyethylene Unit of Arak Petrochemical Industry [Volume 10, Issue 3, 1997]
-
Kish, M.Haghighat
A Review of Cellulose Solvents for Man-Made Fiber Production [Volume 7, Issue 4, 1994]
-
Kohi, N.Mahmodi
Improvement of Wash Fastness of Direct Dyes on Wool and Nylon 6 by Natural and Synthetic Tannins [Volume 19, Issue 6, 2007]
-
Kokabi, M.
Effect of Curing System on Adhesion of Polyester Cord to Rubber in Radial Tires [Volume 12, Issue 3, 1999]
-
Kokabi, M.
Compatibility Study of PP/PET Blend Fibers by PP-g-MA Compatibilizer [Volume 15, Issue 2, 2002]
-
Kokabi, M.
Modelling the Degradation Process of Ablative Composites [Volume 16, Issue 5, 2004, Pages 313-318]
-
Kokabi, M.
Manufacture of Porous Support Systems of Membranes Using In-situ Polymerization [Volume 15, Issue 3, 2002]
-
Kokabi, M.
Thermal Degradation Kinetics of Phenolic Resins Used in Ablative Heat Shields [Volume 15, Issue 4, 2002]
-
Kokabi, M.
Polymeric Composite Leaf Spring [Volume 15, Issue 5, 2003]
-
Kokabi, M.
NdFeB-PEG Permanent Polymeric Composite Magnet [Volume 16, Issue 3, 2003]
-
Kokabi, M.
Design and Manufacture of a Composite Leaf Spring [Volume 17, Issue 1, 2004]
-
Kokabi, M.
Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
-
Kokabi, M.
Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
-
Kokabi, M.
Effect of Surface Modification of Nanosilica on the Viscoelastic Properties of Its Polystyrene Nanocomposite [Volume 21, Issue 6, 2009, Pages 523-531]
-
Kokabi, M.
Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]
-
Kokabi, Mehrdad
Thermal Protection Performance of Phase Changing Material Based on Polyethylene Glycol [Volume 25, Issue 3, 2012, Pages 193-202]
-
Kokabi, Mehrdad
Effect of Nanoclay on Mechanical Properties and Ablation Behavior of a Nitrile-Based Heat Insulator [Volume 25, Issue 6, 2013, Pages 449-458]
-
Kokabi, Mehrdad
VVertical Electrospinning of UHMWPE/ZnO Nanocomposite Fibers at High Temperature [Volume 27, Issue 2, 2014, Pages 141-131]
-
Kokabi, Mehrdad
Synthesis of Plate-Like Nanoalumina and Its Effect on Gas Permeability of Carbon Fiber Epoxy Composite [Volume 30, Issue 1, 2017, Pages 43-51]
-
Kokabi, Mehrdad
Triple Stimuli Responsive Poly(vinyl alcohol)Chitosan/Nanoclay/Nanosilver Nanocomposite Hydrogel [Volume 32, Issue 1, 2019, Pages 3-14]
-
Kookabi, M.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Koolivand, E.
Synthesis and Characterization of Several New Poly(benzimidazole-co-urea)s [Volume 13, Issue 2, 2000]
-
Koopaee, J.Abedi
Evaluating the Application of Superabsorbent Polymers on Soil Water Capacity and Potential on Three Soil Textures [Volume 17, Issue 3, 2004]
-
Korang Beheshti, Maryam
High-Speed Melt Spinnability, Structural and Physical Properties of a Low Melting Copolyester Multifilament Yarn [Volume 36, Issue 5, 2023, Pages 521-537]
-
Kotak, R.
Comparison of Chemical Changes During Photooxidation of Polypropylene Film and Filament Containing Phthalocyanine Pigment [Volume 20, Issue 6, 2008, Pages 561-574]
-
Koudzari Farahani, Samaneh
Surface Modification of Nanofiltration Membrane Using Poly(vinyl alcohol) and Chitosan-Functionalized Activated Carbon Nanoparticles [Volume 34, Issue 4, 2021, Pages 349-358]
-
Koudzari Farahani, Samaneh
Fabrication and Surface Modification of PES-Based Nanofiltration Membrane Using Polymethyl Methacrylate/Graphene Oxide Nanoplates [Volume 36, Issue 5, 2023, Pages 551-565]
-
Kowsari, Mojegan
Fabrication of Polyethersulfone-Based Symmetric Membrane by Applying Pause Stage in Coagulation [Volume 28, Issue 5, 2015, Pages 436-421]
-
Kurdtabar, Mehran
Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]
L
-
Laghaei, Reyhaneh
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Lahootifard, Farzad
Effect of Interactions Between Anionic Vesicles and a Cationic Terpolymer in Concentrated Solution Regime: Morphology and Size Changes of the Vesicular Particles [Volume 29, Issue 1, 2016, Pages 3-14]
-
Langroodi, A.Ershad
Effect of Wax Content on Physical Properties of HDPE [Volume 17, Issue 4, 2004]
-
Langroodi, A.Ershad
Improvement of Corrosion Resistance of Organic-inorganic Hybrid Coatings Based on Epoxy-silica via Aromatic Diol Curing Agent [Volume 17, Issue 6, 2005, Pages 367-357]
-
Langroodi, A.Ershad
Synthesis and Characterization of Hybrid Organic-inorganic Nanocomposite Coatings Based on Tetramethoxysilane and Epoxy Resin by Sol-gel Method [Volume 18, Issue 1, 2005]
-
Lariji, Somayeh
Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk [Volume 27, Issue 1, 2014, Pages 78-63]
-
Latibari, A.Jahan
Effect of Brightening Agent on Optical Properties and Photostability of Chemimechanical Pulp Bleached with Hydrogen Peroxide and Sodium Borohydride [Volume 17, Issue 4, 2004]
-
Latifi, M.
Leonov Constitutive Equation for Modeling of Rod Climbing in Viscoelastic Fluid [Volume 14, Issue 5, 2002]
-
Latifi, Masoud
Effect of Through-the-Thickness Yarn Fineness and Distanceon Damage Behavior of Carbon-Phenolic 3D Composites [Volume 27, Issue 5, 2014, Pages 448-441]
-
Latifi, Masoud
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
-
Latifi, Mohadeseh
Elastomer Nanocomposites Reinforcements with Nanosilicon Carbide and Nanoclay Particles [Volume 31, Issue 1, 2018, Pages 43-55]
-
Layasi, A.Rahmatpoor
Living Polymeric Systems: Design and Application (II) [Volume 8, Issue 2, 1995]
-
Liaghat, G.H.
Evaluation of Reinforced Plastic Pipes Efficiency in Rotating Die System [Volume 19, Issue 4, 2006]
-
Liaghat, G.H.
Evaluation of Fibers Orientation in Pipes Produced by Rotating Die System [Volume 19, Issue 5, 2007]
-
Liaghat, Gholamhossein
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Liaghat4, Golamhossein
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Liassi, A.Rahmatpoor
Application of Living Metathesis Polymerization in the Synthesis of Well Defined Polymers [Volume 9, Issue 2, 1996]
-
Liravi, Bentolhoda
Electrical Conductivity of High Density Polyethylene/Polyamide 6 Blend Induced by Multi-wall Carbon Nanotubes [Volume 33, Issue 2, 2020, Pages 125-136]
-
Lotfi Mayan Sofla, Reza
Effect of Glycerol in Soft and Hard Segments on Properties of Shape Memory Polyurethane [Volume 36, Issue 2, 2023, Pages 191-203]
M
-
M.,
Synthesis of Thermoplastic Polyurethane Elastomers and Effect of Structural Parameters on Their Properties [Volume 7, Issue 2, 1994]
-
M.,
Application of Chitosan as an Adsorbent for Colour Removal of Textile Industrial Wastewaters [Volume 12, Issue 4, 1999]
-
M.,
The Synthesis of Polytetramethylene Ether Glycol with Specific Molecular Weight and Narrow Distribution by Cationic Ring Opening Polymerization of THF and Protonated Acids Application of Chitosan as an Adsorbent for Colour [Volume 12, Issue 4, 1999]
-
M.,
NdFeB-PEG Permanent Polymeric Composite Magnet [Volume 16, Issue 3, 2003]
-
M.,
Ring-opening Bulk-melt Polymerization of Poly(L-lactide) [Volume 16, Issue 4, 2003]
-
M.,
Study of Association Behavior in Step Growth HEUR Aqueous Solutions [Volume 16, Issue 6, 2004]
-
M., M.
A General Overview of Synthetic and Naturally Available Biopolymers [Volume 2, Issue 1, 1989]
-
M., M.
The Importance of Biopolymers in the Controlled Release of Pesticides [Volume 3, Issue 3, 1990]
-
M., S.
Mechanical Behavior of Needle-Punched Nonwoven Fabrics Made from Parallel Acrylic Staple Fibers [Volume 16, Issue 2, 2003]
-
M. B., S.
The Effect of a Silane Coupling Agent on Dielectric Properties of Epoxy/Highly Pure Silica Composite [Volume 9, Issue 1, 1996]
-
M. E. Khosroshahi, S.
The Effect of Argon Laser Wavelength and Radiant Intensity on the Physical and Mechanical Properties of Dental Resin [Volume 19, Issue 5, 2007]
-
M. Golabi, S.
Electrochemical Behavior of Electroactive/Conductive Poly(α-naphthylamine) in Aqueous Media [Volume 5, Issue 2, 1992]
-
M. Haghighat,
Coating Some Synthetic Fibers by Polyaniline to Improve Conductivity [Volume 10, Issue 1, 1997]
-
M. Jalilian, S.
Quantitative and Qualitative Study of Parameters of Hydrogenation Reaction of Nitrile Rubber by Instrumental Method [Volume 14, Issue 6, 2002]
-
M. Mirabedini, S.
Characterization of Powder Molding Compounds (PMC) [Volume 14, Issue 6, 2002]
-
M. Nazhad, Mousa
The Effect of Degree of Substitution of Cationic Starch on Multi-layer Formation of Ionic Starches in Recycled Fibers [Volume 25, Issue 1, 2012, Pages 11-18]
-
M. Rychla, L.
Chemiluminescence of Polyamides: 2-Mechanism and Kinetics of Oxidation [Volume 8, Issue 1, 1995]
-
M. S. Mohaghegh, S.
The Effect of Titanium Acrylate on Thermal and Chemical Properties of modified Epoxy Resins [Volume 8, Issue 4, 1995]
-
M. Seyed Mohaghegh, S.
Using Different Methods to Determine Monomer Reactivity Ratios in Styrene/Acrylonitrile Copolymer [Volume 12, Issue 1, 1999]
-
M. Tabatabaie, S.
Enzyme Biopolishing of Cotton Fabric: Effects of Neurospora Crassa on Cotton Fabric Properties [Volume 9, Issue 3, 1996]
-
M. Taghizadeh, S.
Microencapsulation of Orange Oil and Evaluating the Effect of Some Processing Variables on Qualities of the Capsules [Volume 8, Issue 3, 1995]
-
M. Vahdati Mohadess, S.
Evaluation of Kinetics and Activation Parameters of Electrochemical Polymerization of Ortho-Aminophenol [Volume 13, Issue 1, 2000]
-
M.Kokabi,
Effect of Poly(methacrylic acid) Polyelectrolytes on Stability of Alumina Suspension Systems [Volume 15, Issue 2, 2002]
-
M.Shokrieh, Mamhmood
Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites [Volume 24, Issue 5, 2012, Pages 355-368]
-
Madadi, shirin
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
-
Madaeni, S.S.
Study of the Effect of Acetic Acid and Polyethylene Glycol on Morphology and Performance of Polyvinyl Alcohol Membrane [Volume 16, Issue 1, 2003]
-
Madhoushi, Mehrab
Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
-
Madhoushi, Mehrab
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Madi, Alireza
Pyrolysis Kinetics of Expanded Polystyrene and Polystyrene Wastes [Volume 34, Issue 5, 2022, Pages 469-483]
-
Mafi, R.
Study of Thermal Behavior of Polyester and Epoxy/Polyester Powder Lacquers [Volume 16, Issue 5, 2004]
-
Magagnin, Luca
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Maghsoud, Zahra
Preparation of Porous Thermoset Polyurethane with Supercritical CO2 as Non-solvent [Volume 28, Issue 2, 2015, Pages 109-101]
-
Maghsoudi, V.
Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
-
Maghsudi, Gh.
Effect of Coating Paste Formulation on the Mechanical Properties of Synthetic Leather [Volume 11, Issue 1, 1998]
-
Mahabadi, P.
Pyrolysis Gas Chromatography of Polymers [Volume 4, Issue 4, 1991]
-
Mahboudi, Rasool
The Effect of Novolac and Graphite Polycrystal on the Acetone Penetration and Thermal Resistance of Nanocomposites Based on Nitrile Rubber [Volume 28, Issue 1, 2015, Pages 82-73]
-
Mahdavi, H.
The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
-
Mahdavi, Hossein
Synthesis and Evaluation of Glyoxalated Polyacrylamide (GPAM) as a Wet and Dry-Strengthening Agent of Paper [Volume 27, Issue 2, 2014, Pages 129-121]
-
Mahdavi, Hossein
Polyethersulfone-MIL-53(Al) Nanoparticles Mixed Matrix Membranes for Separation of Aqueous Dye Solutions [Volume 34, Issue 4, 2021, Pages 387-402]
-
Mahdavi, Hossein
Recent Advances in Polyolefin-Based Separators for Li-ion Battery Applications: A Review [Volume 34, Issue 5, 2022, Pages 423-442]
-
Mahdavi Moghadam, Zahra Sadat
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Mahdavian, A.
Synthesis of Aliphatic Polyamides Containing 4-(4-Benzophenone)Urazole Linkages [Volume 11, Issue 3, 1998]
-
Mahdavian, Ali Reza
Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
-
Mahdavian, Ali Reza
Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
-
Mahdavian, Ali Reza
Preparation of Photoresponsive Functionalized Acrylic Nanoparticles Containing Carbazole Groups for Smart Cellulosic Papers [Volume 30, Issue 5, 2018, Pages 435-446]
-
Mahdavian, Ali Reza
Role of Polymers in Developing Phase Change Materials for Energy Storage: A Review on Encapsulation Methods and Their Applications [Volume 33, Issue 3, 2020, Pages 179-212]
-
Mahdavian, M.
Sorption Behavior of CO2 and CH4 of Glassy Polymeric Membranes and Analytical Discussion of Partial Immobilization Model [Volume 20, Issue 2, 2007, Pages 165-178]
-
Mahdavian, M.
Modelling of Multicomponent Gases Permeation Process through Glassy
Polymer Membranes by the Maxwell-Stefan Formulation [Volume 18, Issue 6, 2006, Pages 359-368]
-
Mahdavinia, Mahsa
Fabrication of Ultrasensitive Bio-Nanosensor Based on Polypyrrole/Graphene Nanocomposite [Volume 34, Issue 6, 2022, Pages 579-595]
-
Mahdavipour, Zahra
Thermomechanical Properties of Nylon 6,6/Polyester Hybrid Tire Cord: Effect of Twist Level and Core Ratio [Volume 33, Issue 2, 2020, Pages 115-123]
-
Mahfouzi, K.
Solvent Texturing of Polyester Yarns Using Trichloroacetic Acid/Methylene Chloride [Volume 20, Issue 5, 2008, Pages 429-436]
-
Mahi Hassanabadi, H.
Preparation of Esterified Styrene-maleic Anhydride Copolymer and Investigation of Physical and Mechanical
Properties of Its Blends with LLDPE [Volume 21, Issue 2, 2008, Pages 119-125]
-
Mahmoodi, Mahboobeh
Electron Beam-Irradiated Crosslinked Hydrogel Scaffold form Natural and Synthetic Polymers:
Synthesis and Characterization [Volume 36, Issue 1, 2023, Pages 47-60]
-
MahmoodiAsl, S.
Synthesis of a Triblock Nonionic Copolymer Poly(ricineoleic acid-b-ethyleneglycol-b-ricineoleic acid) and Investigation of
the Stability of Its Associated Water/Oil Emulsion [Volume 21, Issue 6, 2009, Pages 457-464]
-
Mahmoodpoor Sharbian, Lila
Alginate-based Hydrogel Nanocomposites Made by Carbon Nanotubes and Acrylamide/Itaconic acid as Co-monomers [Volume 24, Issue 5, 2012, Pages 413-423]
-
Mahmoudi Nejad, M.R.
Modification of Impact Strength of Nilon 6 with Butadiene Rubber [Volume 10, Issue 4, 1997]
-
Mahzoon, R.
Improved Laser Induced Birefringence in Highly Doped Optical Polymers [Volume 21, Issue 4, 2008, Pages 179-284]
-
Mahzoon, R.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
-
Majedi, S.
Alignment of Electrospun Nanofibers and Prediction of Electrospinning Linear Speed Using a Rotating Jet [Volume 22, Issue 3, 2009, Pages 233-242]
-
Majidian, D.
Elastomeric Insulator for Rockets [Volume 5, Issue 2, 1992]
-
Majidian, N.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Majzoobi, Mahsa
Effect of Ultrasound on Physicochemical Properties of Wheat Starch [Volume 27, Issue 1, 2014, Pages 23-15]
-
Malakoutikhah, Fatemeh
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Mallakpour, S.
Application of Functionalized Polymers in Chemistry and Organic Synthesis [Volume 7, Issue 1, 1994]
-
Mallakpour, S.E.
Synthesis of Functionalized Polymers [Volume 6, Issue 4, 1993]
-
Mallakpour, S.E.
Polymeric Food Dyes [Volume 7, Issue 2, 1994]
-
Mallakpur, S.
The Synthesis of Optical Active Polymers with the Use of Chiral Triazolinediones [Volume 4, Issue 3, 1991]
-
Mamizadeh Kaghal, A.
Recycling of PET Beverage Bottles and Studies on its Crystallinity, Mechanical and Rheological Properties [Volume 14, Issue 6, 2002]
-
Manafi, Mohammad Reza
Rheological Properties of Nanocomposite Aqueous Dispersions Based on Poly(acrylamide-co-acrylic acid) and Carbon Nanotube [Volume 30, Issue 3, 2017, Pages 207-219]
-
Manafi, Mohammad Reza
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Manafi, Mohammadreza
Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticle Functionalization [Volume 27, Issue 5, 2014, Pages 394-383]
-
Manafi, Pedram
Crystallization and Morphology of Nanocomposites Based on Poly(lactic acid)/Graphene Nanoplatelets: Effect of Nanoparticle Functionalization [Volume 27, Issue 5, 2014, Pages 394-383]
-
Manafi, Pedram
Rheological Properties of Nanocomposite Aqueous Dispersions Based on Poly(acrylamide-co-acrylic acid) and Carbon Nanotube [Volume 30, Issue 3, 2017, Pages 207-219]
-
Manafi, Pedram
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Manesh, K.Sobhan
Improvement of Physical and Mechanical Properties of Butadiene Rubber with Silica/ Silane Reinforcement System [Volume 17, Issue 5, 2005]
-
Manesh, K.Sobhan
Assessments on the Tear Resistance Improvement Mechanisms in the Carbon Black/Silica/Silane Reinforcement Systems [Volume 18, Issue 2, 2005]
-
Mansour, Masoud
Numerical Modeling and Experimental Study of Elastic-Plastic Behavior of Carbon Nanotubes Reinforced Nanocompsites of PA6/NBR Using a Microfinite Element Model [Volume 27, Issue 5, 2014, Pages 421-409]
-
Mansour Lakouraj, Moslem
Fabrication and Characterization of Dextrin-g-Polypyrrole/Graphene Oxide Nanocomposite for Effective Removal of Pb (II) and Methylene Blue Dye from Aqueous Solutions [Volume 30, Issue 5, 2018, Pages 447-462]
-
Mansour Lakouraj, Moslem
Rhodamine B Dye Removal from Aqueous Solutions Using Poly(N-vinylpyrrolidone-co-maleic anhydride)/Rice Husk Biocompatible Nanocomposite: Isothermal, Kinetics and Thermodynamic Studies [Volume 31, Issue 1, 2018, Pages 81-92]
-
Mansourian-Tabaei, Mohammad
A Comparative Study on the Influence of Nanoalumina and Carbon Nanotubes on Thermal Stability, Adhesion Strength and Morphology of Epoxy Adhesives [Volume 27, Issue 6, 2015, Pages 369-361]
-
Mansourirad, Maryam
Biological Reclaiming of Recycled Rubber and Its Effect on Mechanical Properties of New Rubber Vulcanizates [Volume 27, Issue 5, 2014, Pages 407-395]
-
Mansurnezhad, Reza
Coating of Silk Fabric Using PVA/Ciprofloxacin Hcl Nanofibers for Biomedical Applications [Volume 29, Issue 2, 2016, Pages 171-184]
-
Marandi, reza
Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of
Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
-
Mardani, Hanieh
Polystyrene Chains with Different Grafting Densities on the Surface of Graphene Oxide by "Grafting Through” Method [Volume 33, Issue 3, 2020, Pages 255-270]
-
Marefat, Mohamadreza
Synthesis of Chromium-Based Catalysts and Study of Various Solvents on the Morphology and Structural
Parameters of the Catalysts in Ethylene Polymerization [Volume 34, Issue 3, 2021, Pages 233-247]
-
Marefat Seyedlar, Roghayyeh
Effect of Salt on Gelation Behavior of Injectable Nanocomposite Scaffold Based on Hydroxypropyl Methylcellulose and Hydroxyapatite/Tricalcium Phosphate Nanoparticles [Volume 27, Issue 2, 2014, Pages 109-99]
-
Marefat Seyedlar, Roghayyeh
Temperature-Responsive Hydrogels: Materials, Mechanisms and Biological Applications [Volume 31, Issue 3, 2018, Pages 211-237]
-
Maroof, B.Tekie
Effect of Synergism on Fracture Toughness of an Epoxy-Based Blend Containing Recycled Rubber Particles [Volume 17, Issue 5, 2005]
-
Masaeli, E.
Study of Low Pressure Cold Plasma on Moisture Properties of Polyester Fabric [Volume 20, Issue 2, 2007, Pages 155-163]
-
Masdarolomoor, Fatemeh
Removal of Methyl Orange Dye from Aqueous Solution Using Bioadsorbent Modified with Polyaniline Nanofibers;
Isotherm, Kinetic and Thermodynamic Studies [Volume 35, Issue 5, 2023, Pages 435-453]
-
Mashak, A.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Mashak, A.
Progesterone Release from Electron Beam Crosslinked Silicone Rubber and Study of its Mechanical Properties [Volume 21, Issue 3, 2008, Pages 209-216]
-
Mashayekhi, Maryam
Effects of Neutralization and Crosslinking Agents on the Morphology of Chitosan Electrospun Scaffolds [Volume 29, Issue 6, 2017, Pages 519-529]
-
Mashayekhi, Maryam
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Mashhadi-Hasan-Shirazi, mahshid
Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of
Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
-
Mashhadi Farahani, Mina
Castor Oil-Based Waterborne Polyurethanes: An Overview [Volume 35, Issue 4, 2023, Pages 299-338]
-
Mashkour, Mahdi
Studying the Properties of Polyvinyl Alcohol/Cellulose Nanofiber/Hydroxyapatite Hybrid Nanocomposite [Volume 28, Issue 2, 2015, Pages 99-91]
-
Maskooki, A.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Masoodi, A.
Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
-
Masoudi, A.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Massoumi, B.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Massoumi, B.
Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
-
Massoumi, Bakhshali
Preparation and Characterization of Conducting Polymer Latices by Chemical Polymerization of Aniline or Anisidine in Presence of Latex: Study of Their Electroactivity and Anti-Corrosion Properties [Volume 26, Issue 4, 2013, Pages 325-317]
-
Massoumi, Bakhshali
Preparation of Water-Soluble Homo and Copolymers of Bithiophene with 3,4-Ethylene Dioxythiophene and 3-Dodecylthiophene in Presence of Polystyrene Sulfonic Acid: Structure, Morphology, Thermal Stability [Volume 28, Issue 1, 2015, Pages 18-3]
-
Massoumi, Bakhshali
Conductive Nanofibrous Scaffolds Based on Tragacanth Gum, Polyaniline, and Poly(vinyl alcohol): Fabrication, Characterization and Exploring
Their Potential Application in Skin Tissue Engineering [Volume 36, Issue 3, 2023, Pages 259-279]
-
Mazaheri, F.Mehr
Study of the Photochemical Degradation of Cotton Fabric Dyed with Vat Dyed [Volume 9, Issue 3, 1996]
-
Mazaheri, Leila
Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
-
Mazaheriyan, Maliheh
1-Hexene Polymerization Using Ziegler-Natta Catalytic System with Response Surface Methodology [Volume 30, Issue 3, 2017, Pages 197-206]
-
Mazinani, S.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Mazinani, Saeedeh
Physical and Mechanical Properties of Electrospun PLA Nanofibers in the Presence of Silicone Rubber Nanoparticles [Volume 35, Issue 5, 2023, Pages 455-468]
-
Medipour-Ataei, Shahram
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Meeghani, H.
Characterization and Synthesis of Denture Base Polymer [Volume 14, Issue 1, 2001]
-
Meghdadi Kasani, Rashid
Preparation and Investigation of Gum Tragacanth/Gelatin Nanofibers for Antibacterial Drug Delivery Systems [Volume 32, Issue 2, 2019, Pages 145-155]
-
Mehdipour-Ataei, shahram
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Mehdipour-Ataei, Shahram
A Review on Role and Characteristics of Polymeric Membrane in Vanadium Redox Flow Battery [Volume 35, Issue 5, 2023, Pages 411-434]
-
Mehdipour–Ataei, Shahram
Synthesis, Characterization, and Properties of Novel Aromatic UV Absorber Polyamides [Volume 32, Issue 4, 2019, Pages 327-337]
-
Mehr, M.J.Zohoorian
Reaction of Metal Atoms with monomers and Polymers [Volume 6, Issue 1, 1993]
-
Mehr, M.J.Zohoorian
Liquid Hydrocarbon Absorbents (Part II): Optimized Synthesis of Bagasse-Polystyrene Network [Volume 17, Issue 3, 2004]
-
Mehrabbaigi, H.
Health Hazards of Isocyanates in Polyurethane Industry: Safety and Storage of TDI [Volume 5, Issue 4, 1992]
-
Mehrabi, H.A.
Studying the Effect of Different Ratios of High Density Polyethylene Wax Binder on the Mechanical Strength of Ceramic Cores Made from an Injection Molding Process [Volume 13, Issue 4, 2000]
-
Mehrabi Kooshki, Razieh
Transesterification Reactions in PC/PBT Blend in Presence of Nanoclay Particles and Their Effect on Blend Morphology [Volume 26, Issue 2, 2013, Pages 101-113]
-
Mehrabli, B.
Structural and Physical Properties of Filament Yarns Melt-Spun from PP/LDPE Blend Before and After False-Twist Texturing [Volume 21, Issue 1, 2008, Pages 9-18]
-
Mehrabzadeh, M.
Composites [Volume 1, Issue 1, 1988]
-
Mehrabzadeh, M.
Composites (2) [Volume 1, Issue 2, 1988]
-
Mehrabzadeh, M.
Composites (3) [Volume 2, Issue 1, 1989]
-
Mehrabzadeh, M.
Composites (4) [Volume 2, Issue 2, 1989]
-
Mehrabzadeh, M.
Combustion Characteristics Studies of Flooring and Polymeric Materials by Cone Calorimetry [Volume 9, Issue 3, 1996]
-
Mehrabzadeh, M.
Study of Mechanical Properties, Thermal Behaviour and Morphology of PP/HDPE and PP/ LDPE Blends [Volume 10, Issue 2, 1997]
-
Mehrabzadeh, M.
Investigation of Polyvinyl Chloride and Nitrile Rubber Blends [Volume 10, Issue 4, 1997]
-
Mehrabzadeh, M.
Preparation of Silane Grafting and Crosslinking of Polyethylene: Studies of the Factors Affecting the Grafting and Crosslinking Processes [Volume 11, Issue 1, 1998]
-
Mehrabzadeh, M.
Preparation and Investigation of Physical and Mechanical Properties of Biocompatible Blend Based on PDMS/PHEMA [Volume 11, Issue 3, 1998]
-
Mehrabzadeh, M.
Maleic Anhydride Reaction of HDPE and Preparation of High Impact HDPE Calcium Carbonate [Volume 12, Issue 1, 1999]
-
Mehrabzadeh, M.
Preparation and Properties of PP/PET Blend [Volume 12, Issue 3, 1999]
-
Mehrabzadeh, M.
Studies on the Effect of Different Systems of Dynamic Vulcanization on the Mechanical Properties of Natural Rubber/Polypropylene Thermoplastic Elastomers [Volume 12, Issue 4, 1999]
-
Mehrabzadeh, M.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Mehrabzadeh, M.
Study on Physical and Mechanical Properties, Thermal Behaviour and Morphology of Polyacetal and Polyurethane Thermoplastic Elastomer Blends [Volume 13, Issue 3, 2000]
-
Mehrabzadeh, M.
Production of PVC/ABS/NBR Blend and the Study of Its Physical and Mechanical Properties, Thermal Behaviour and its Morphology [Volume 14, Issue 3, 2001]
-
Mehrabzadeh, M.
On the Compatibilization and Dynamic Vulcanization of POM/NBR Blends [Volume 14, Issue 3, 2001]
-
Mehrabzadeh, M.
Effects of Different Types of Clays and Maleic Anhydride Modified Polystyrene on Polystyrene/Clay Nanocomposites [Volume 22, Issue 2, 2009, Pages 151-157]
-
Mehranpour, Milad
Mechanism of Improvement in Tribological Properties of Polyamide 6 by Addition of Irradiated Polytetrafluoroethylene Powder [Volume 27, Issue 6, 2015, Pages 412-403]
-
Mehranpour, Milad
Effect of Liquid Waste Polysulfide and Nanoclay on Engineering Properties of Bitumen [Volume 30, Issue 3, 2017, Pages 255-268]
-
Mehrdad shokrieh, M.
Effects of Structural Parameters on Mechanical Properties
Polymer/Clay Nanocomposites [Volume 20, Issue 2, 2007, Pages 187-195]
-
Mehrdad shokrieh, M.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
-
Mehrdad Shokrieh, Mahmood
An Estimation of Longitudinal Strength Reduction of Unidirectional E-glass/Epoxy Composite Exposed to Sulfuric Acid Using a Micromechanics Model [Volume 25, Issue 2, 2012, Pages 91-101]
-
Mehrdad Shokrieh, Mahmood
The Impact Resistance of Fiber-Reinforced Polymer Composites: A Review [Volume 24, Issue 4, 2011, Pages 255-277]
-
Mehrdad Shokrieh, Mahmoud
Extension of Slitting Method for Simultaneous Measurement of Residual Normal and Shear Stresses in Polymer Composites [Volume 25, Issue 4, 2012, Pages 301-313]
-
Mehrdad Shokrieh, Mahmoud
Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
-
Mehrebzadeh, M.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Mehtarani, R.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Mehtarani, R.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Memar Maher, Behnaz
Modeling and Optimization of Cefixime Removal from Aqueous Solutions by Poly(vinylidene fluoride)/Graphitic Carbon Nitride/Chitosan Membrane Using Response Surface Methodology [Volume 35, Issue 2, 2022, Pages 139-149]
-
Mengelizadeh, Nezamaddin
Physicochemical Characterization of Biopolymer Chitosan Extracted from Shrimp Shells [Volume 27, Issue 6, 2015, Pages 380-371]
-
Mighani, H.
Effect of Various Factors on Mobility of Inner Layers to Outer Layers of Polypropylene in Two-Component Injection Moulding Machines [Volume 9, Issue 2, 1996]
-
Mihankhah, Peyman
Effect of Printer Process Parameters of Fused Filament Fabrication on the Tensile Strength and Density of Polylactic Acid/Nanoclay Nanocomposites [Volume 36, Issue 5, 2023, Pages 539-549]
-
Minuchehr, Abdol Hamid
Molecular Dynamics Study on the Effect of Silicon Carbide Nanoparticles on Mechanical and Thermal Properties of an Araldite Epoxy Resin [Volume 32, Issue 3, 2019, Pages 211-224]
-
Mir, M.
Electrical Conductivity of Short Carbon Fibers and Carbon Black- Reinforced Chloroprene Rubber [Volume 15, Issue 3, 2002]
-
Mir Mohamad Sadeghi, Gity
Synthesis of Shape Memory Polyurethane/Nanoclay Composites: Chemical Structure and Interactions between Polymer and Nanoclay Particles [Volume 25, Issue 1, 2012, Pages 19-30]
-
Mirabedini, M.
Adhesion Improvement of Epoxy Coating on Aluminium Substrate Using an Amino-Silane Compound [Volume 16, Issue 2, 2003]
-
Mirabedini, M.
Study of Thermal Behavior of Polyester and Epoxy/Polyester Powder Lacquers [Volume 16, Issue 5, 2004]
-
Mirabedini, M.
Application of Silane Compounds for Improving Adhesion of a Silicone
Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
-
Mirabedini, S.M.
Effect of Surface Pretreatment on Adhesion Strength and Corrosion Resistance of Powder Coated Aluminium [Volume 12, Issue 3, 1999]
-
Mirabedini, S.M.
The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
-
Mirabedini, S.M.
Effect of Silane Compounds on the Adhesion Strength of Acrylic Lacquers to the Flame Pretreated Polypropylene Surfaces [Volume 19, Issue 4, 2006]
-
Mirabedini, S.M.
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Mirabedini, S.M.
Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
-
Mirabedini, Sayed Mojtaba
Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
-
Mirabedini, Seyed Mojtaba
Mechanical Properties of a Water-Based Acrylic Coating Containing Microcapsules of Rapeseed Oil- Ethyl Cellulose [Volume 26, Issue 4, 2013, Pages 358-349]
-
Mirabedini, Seyed Mojtaba
Effect of Benzoyl Peroxide Content on Physical and Mechanical Properties of a Two-Component Methylmethacrylate-based Traffic Paint [Volume 30, Issue 6, 2018, Pages 547-555]
-
Mirali, M.
Studies on the Rheological Behavior of Compatibilized HIPS/HDPE Blends [Volume 17, Issue 1, 2004]
-
Mirhosseini, Mohammad Masoud
Effect of Pluronic Introduction to Polycaprolactone Substrate on the Blend Hydrophilicity by Molecular Dynamic Simulation [Volume 29, Issue 3, 2016, Pages 286-300]
-
Miri, S. Taghi
Removal of Fluoride Ion from Aqueous Solution by Nanocomposite Hydrogel Based on Starch/Sodium Acrylate/Nano Aluminum Oxide [Volume 26, Issue 5, 2014, Pages 391-381]
-
Mirimani, Seyyed Mehdi
Modification and Performance Enhancement of PVC Ultrafiltration Membrane by Grafting of Sulfonated Polystyrene [Volume 33, Issue 3, 2020, Pages 243-254]
-
Mirjalili, A.
Spiders: Silk Spinning and Properties [Volume 5, Issue 4, 1992]
-
Mirkhalilzadeh Ershady, F.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Mirmohammad, G.
Effect of Styrene and Maleic Anhydride Content on Compressive Strength of TDI Modified Closed Cell Rigid Crosslinked PVC Foam [Volume 10, Issue 2, 1997]
-
Mirmohammad, M.
Study of Ultraviolet (UV) Effect on Stabilization of Polyurethane Against Bacterial Deterioration [Volume 12, Issue 3, 1999]
-
Mirmohammad, M.
Study on Inhibition of Biological Deterioration of a Type of Polyurethane Binder by Using Some Chemical Agents [Volume 15, Issue 3, 2002]
-
Mirmohammad Sadeghi, M.
Biodegradation of Polyurethanes by Fungi [Volume 6, Issue 4, 1993]
-
Mirmohammadi, Seyed Amin
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Mirmohseni, Abdolreza
Epoxy-Based Composite Adhesive Containing Silver Coated Copper Powder: Preparation and Evaluation of Its Electrical Properties [Volume 30, Issue 1, 2017, Pages 53-61]
-
Mirshafiei, Mojdeh Sadat
Preparation of Hyaluronic acid-Aloevera Nanoparticles for Sustained Delivery of Doxycycline [Volume 31, Issue 6, 2019, Pages 539-550]
-
Mirshokraie, S.A.
Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
-
Mirshokraie, S.A.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Mirshokraie, Seyed Ahmad
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Mirza, M.
Role of the Effective Factors on Laboratory Synthesis of Poly(p-phenylene terephthalamide) Fibers [Volume 11, Issue 2, 1998]
-
Mirza-Seyyedi, S.H.
Prediction of Viscoelastic Properties of Reinforced Epoxy/Unidirectional Glass Fiber Composite [Volume 11, Issue 1, 1998]
-
Mirzababaei, Mehdi
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Mirzadeh, H.
Jute Reinforced Polyester Structures [Volume 2, Issue 2, 1989]
-
Mirzadeh, H.
Surface Modification of EPR as Biomaterial by Laser Induced Graft Copolymerization of AAm, HEMA and NVP: II- HEMA and NVP [Volume 7, Issue 3, 1994]
-
Mirzadeh, H.
The Present Status of Iran's Natural Gas Industry and its Importance in Country's Future Development Programmings [Volume 9, Issue 2, 1996]
-
Mirzadeh, H.
Evaluation of the Excimer and CO2 Laser Effects on the Surface Properties of Polyethylene Terephthalate [Volume 12, Issue 1, 1999]
-
Mirzadeh, H.
Production of a Polymeric Ocular Prosthesis for Glaucoma Production of a Polymeric Ocular Prosthesis for Glaucoma Therapy [Volume 13, Issue 1, 2000]
-
Mirzadeh, H.
Determination of Crosslinking Density of Poly(dimethylsiloxane) Network by Calorimetry and its Comparison with Equilibrim Swelling Method [Volume 12, Issue 4, 1999]
-
Mirzadeh, H.
Effect of Hydrogel Content on Properties of a Composite Based on RTV Silicone Rubber on Matrix and Cross -linked Poly(acrylic acid) Particles as The Dispersed Phase [Volume 15, Issue 1, 2002]
-
Mirzadeh, H.
Optimization of Chitin Extraction from Shrimp’s Shell and Chitosan Preparation: Study of Parameters Influence on Chitin Deacetylation Reaction and Biocompatibility Evaluation (In vitro) [Volume 15, Issue 1, 2002]
-
Mirzadeh, H.
Evaluation of Effective Parameters on Cold Duration in Cryoaccumulator Gels [Volume 15, Issue 6, 2003]
-
Mirzadeh, H.
Manufacture and Investigation of Mechanical Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers [Volume 16, Issue 1, 2003]
-
Mirzadeh, H.
Surface Modification of Silicone Elastomer to Increase Hydrophobicity [Volume 16, Issue 3, 2003]
-
Mirzadeh, H.
Effect of Radio Frequency Plasma on Polystyrene Surface Properties [Volume 19, Issue 5, 2007]
-
Mirzadeh, H.
Chitosan and Nanohydroxyapatite Roles in Physical and Chemical Characteristics of
Gelatin/Chitosan/Nanohydroxyapatite Microspheres [Volume 23, Issue 6, 2011, Pages 487-498]
-
Mirzadeh, H.
Effect of Fabrication Process Parameters on the Size of Gelatin/Nanohydroxyapatite Microspheres [Volume 22, Issue 4, 2009, Pages 285-294]
-
Mirzadeh, H.
Fabrication of Porous Scaffolds from Poly(D,L-lactic acid) by Liquid-Liquid Phase Separation [Volume 21, Issue 6, 2009, Pages 495-501]
-
Mirzadeh, H.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Mirzadeh, H.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
-
Mirzadeh, Hamid
Effect of Solution Surface Tension on Morphology of PLGA and Gelatin Electrospun Fibers [Volume 25, Issue 1, 2012, Pages 3-10]
-
Mirzadeh, Hamid
Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
-
Mirzadeh, Hamid
Effects of Neutralization and Crosslinking Agents on the Morphology of Chitosan Electrospun Scaffolds [Volume 29, Issue 6, 2017, Pages 519-529]
-
Mirzai, Mohammad Ali
Bioplastic Nanocomposites Based on Polybutylene Succinate Adipate (PBSA)/Aminosilane Modified Nonocrystalline Cellulose: Structural, Thermal and Physical Properties [Volume 34, Issue 5, 2022, Pages 499-516]
-
Mirzai, Mohammad Ali
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
-
Mirzamohammadi, Mohammad
Surface Modification of Nanofiltration Membrane Using Poly(vinyl alcohol) and Chitosan-Functionalized Activated Carbon Nanoparticles [Volume 34, Issue 4, 2021, Pages 349-358]
-
Mirzapour, Aidin
Effect of Nanosilica on Bending Strength and Thermal Stability of Glass Fiber/Phenolic Nanocomposite [Volume 29, Issue 4, 2016, Pages 377-386]
-
Mirzapour, Aidin
Investigation of the Thermal Resistance of Phenolic Resin/Glass Fiber/Nanosilica Nanocomposites [Volume 31, Issue 4, 2018, Pages 359-371]
-
Mirzapour, M.A.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Mirzapour, Mir Asad
Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]
-
Mirzataheri, M.
Synthesis of Poly(p-phenyleneterephthalamide) for Producing Kevlar Super Fibers [Volume 10, Issue 3, 1997]
-
Mirzataheri, M.
The Synthesis of Polytetramethylene Ether Glycol with Specific Molecular Weight and Narrow Distribution by Cationic Ring Opening Polymerization of THF and Protonated Acids Application of Chitosan as an Adsorbent for Colour [Volume 12, Issue 4, 1999]
-
Mirzataheri, M.
Studying and Analyzing the Effect of SBR Substitution by PU in Rubber Compounds Properties [Volume 15, Issue 5, 2003]
-
Mirzataheri, M.
Synthesis and Characterization of Suitable Resole for Preparation of Phenolic Foam [Volume 16, Issue 5, 2004]
-
Mirzataheri, M.
Studying the Effective Parameters on Preparation of Resole Used in Phenolic Foam [Volume 17, Issue 1, 2004]
-
Mirzataheri, Mojgan
Preparation and Determining Factors in Adhesion Properties of Acrylic Pressure-Sensitive Adhesive [Volume 28, Issue 6, 2016, Pages 476-465]
-
Mirzataheri, Mojgan
Potassium Permanganate Solution-containing Polyethylene Nanocomposite Film Used as Color Indicator in Smart Packaging [Volume 30, Issue 3, 2017, Pages 183-196]
-
Mitchell, G.R.
The Role of Polymer Matrix in Nonlinear Optical Properties of Dye Doped Polymer Films [Volume 7, Issue 4, 1994]
-
Mivechi, H.
The Role of Photosensitive Polymers in Printing Industry [Volume 2, Issue 4, 1989]
-
Mivehchi, H.
The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
-
Moatar, M.T.Zaferani
Polymer Properties and Theory of Scaling [Volume 6, Issue 1, 1993]
-
Moballegh, L.
Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
-
Mobarake, H.Salehi
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization (Part III): Effect of Scale up and Heat Generation Comparison [Volume 17, Issue 3, 2004]
-
Mobedi, H.
Ring-opening Bulk-melt Polymerization of Poly(L-lactide) [Volume 16, Issue 4, 2003]
-
Mobedi, H.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Mobedi, H.
Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
-
Modarresi-Alam, Ali Reza
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Modarress, H.
A Review on Experimental Methods and Applications for Measurement of Thermodynamic Properties of Polymer Solutions [Volume 6, Issue 4, 1993]
-
Moeini, M. Hasan
The Effect of Foaming Process on the Radar Absorbing Properties of PMMA/MWCNT Composites [Volume 28, Issue 3, 2015, Pages 195-189]
-
Moeini, Mohammad Hassan
Morphological Parameters in Relation to the Electromagnetic Properties of Microcellular Thermoplastic Polyurethane Foam in X-Band Frequency Ranges [Volume 30, Issue 1, 2017, Pages 19-30]
-
Moeini, Razieh
Effect of Thermally-Reduced Graphene Nanoparticles on the Electromagnetic Interference Shielding Performance, Rheological Behavior and Thermal Stability of PP/PET Blend [Volume 31, Issue 4, 2018, Pages 319-330]
-
Moeini, T.
Effects of Decalin on Some Properties of Polypropylene Continuous Filaments [Volume 20, Issue 5, 2008, Pages 465-479]
-
Moemen Bellah, Samad
Effect of Exfoliated Graphene Nanoplatelets on Rheological, Morphological, Mechanical and Thermal Properties of Immiscible Polypropylene/Polystyrene (PP/PS) Blends [Volume 29, Issue 5, 2017, Pages 478-488]
-
Moghadam, Farhad
DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
-
Moghadam, M.Jalili
Effect of Processing Conditions on the Orientation and Properties of Polyethylene Blown Film [Volume 2, Issue 4, 1989]
-
Moghadam, S.Motahari
Continuous Vulcanization for Extrusion Compounds [Volume 5, Issue 3, 1992]
-
Moghadas Nejad, Fereydon
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Moghadasibagha, Behrouz
Effect of Sonification Time on Synthesisi and Corrosion Resistance of Epoxy-Clay Nanocomposite [Volume 29, Issue 4, 2016, Pages 335-346]
-
Moghadassi, A.R.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Moghadassi, Abdolreza
Surface Modification of Polyethersulfone-Based Nanofiltration Membrane Using Carboxylated Graphene Oxide and Polyethyleneimine [Volume 35, Issue 5, 2023, Pages 501-513]
-
Moghaddam, M.R.Abdollahi
Styrene Monomer Recovering from Thermal Degradation of Polystyrene [Volume 20, Issue 1, 2007]
-
Moghaddam, M.Sedighi
Study of Effective Paramertes on Polymerization Kinetics of HDPE [Volume 20, Issue 1, 2007]
-
Moghiman, Mohamad
Simulation of Injection Molding Process Including Mold Filling and Compound Curing [Volume 24, Issue 4, 2011, Pages 317-327]
-
Moghimi, A.
Skin Permeation Enhancers and their Effects on Narcotic Transdermal Drug Delivery Systems through Response Surface Experimental Design [Volume 26, Issue 6, 2014, Pages 473-459]
-
Mohaddes Mojtahedi, M.R.
Structural and Physical Properties of Filament Yarns Melt-Spun from PP/LDPE Blend Before and After False-Twist Texturing [Volume 21, Issue 1, 2008, Pages 9-18]
-
Mohades Mojtahedi, M.R.
The Effect of Drawing Parameters on Some Properties of Nylon 6 Filament Yarn [Volume 16, Issue 4, 2003]
-
Mohadeth Mojtahedi, M.R.
Matrix-Fibril Morphology and Structure of Polyblend Fibers in Melt Spinning Process: A Review [Volume 21, Issue 5, 2009, Pages 367-388]
-
Mohaghegh, S.M.
Synthesis and Characterization of Emulsion Copoly(Butylacrylate-Methyl methacrylate) [Volume 10, Issue 1, 1997]
-
Mohajerani, A.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Mohajerani, E.
Improved Laser Induced Birefringence in Highly Doped Optical Polymers [Volume 21, Issue 4, 2008, Pages 179-284]
-
Mohajerani, E.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
-
Mohamadnia, F.
Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
-
Mohamadpour Gorgi, Abolghasem
Dehumidification of Gas Stream Using Nanostructured Polyetherimide Hollow Fiber Membrane in Membrane Contactor [Volume 32, Issue 5, 2020, Pages 373-384]
-
Mohammad, H.R.
Effect of Monomer Concentraion on the Kinetics of Emulsifier-free Emulsion Polymerization of Vinyl Acetate and Methyl Acrylate [Volume 14, Issue 1, 2001]
-
Mohammad, S.
Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
-
Mohammad Beigi, kh.
Comparison of Different Biopolymers Performance in Water Treatment [Volume 18, Issue 5, 2006, Pages 285-290]
-
Mohammad Hassani, Z.
Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property,
Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
-
Mohammadi, Abbas
Polyurethane Nanocomposites Based on Layered
Double Hydroxides: A Review on Their Syntheses
and Applications [Volume 33, Issue 5, 2021, Pages 369-384]
-
Mohammadi, Abbas
Antibacterial Coatings Based on Waterborne Polyurethanes: A Review on Synthesis Methods, Properties and Applications [Volume 35, Issue 1, 2022, Pages 3-23]
-
Mohammadi, Abbas
A Review on Chitosan-Containing Polyurethanes: Synthesis, Properties and Applications [Volume 36, Issue 1, 2023, Pages 3-22]
-
Mohammadi, M.
Investigation of Mixing, Morphology and Mechanical Properties of Polyethylene/Starch/Polycaprolactone Compounds [Volume 18, Issue 3, 2005, Pages 181-190]
-
Mohammadi, Maryam
A Review on Role and Characteristics of Polymeric Membrane in Vanadium Redox Flow Battery [Volume 35, Issue 5, 2023, Pages 411-434]
-
Mohammadi, Mohammad Mehdi
Investigation of Mechanical and Thermal Properties of Polymer Composites Reinforced by Multi-Walled Carbon Nanotube for Reduction of Residual Stresses [Volume 27, Issue 3, 2014, Pages 230-213]
-
Mohammadi, Mohsen
The Absorption of Alcohol and Saline Solution by
Carbopol Grafted with 2-Acrylamido-2-methylpropane Sulfonic Acid Prepared Through Ultrasonic Method [Volume 32, Issue 3, 2019, Pages 255-266]
-
Mohammadi, N.
Morphology Control in Cellulose Acetate Membrane [Volume 11, Issue 4, 1998]
-
Mohammadi, N.
Continuous Injection Molding of Thermoplastic Structural Foam [Volume 16, Issue 2, 2003]
-
Mohammadi, N.
Investigation of the Effect of Compatibilizer on Adhesion of Polyethylene to Plasticized Starch [Volume 19, Issue 3, 2006]
-
Mohammadi, N.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Mohammadi, N.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Mohammadi, V.
A Comparison between Silica–immobilized Ligands and their Polysiloxane Counterparts [Volume 16, Issue 5, 2004]
-
Mohammadi, V.
Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
-
Mohammadi, Y.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Mohammadi-Rovshandeh, J.
Synthesis of Poly(dl-lactide-co-dl-3,6-dimethyl-morpholine-2,5-dione) [Volume 14, Issue 3, 2001]
-
Mohammadi-Vanyar, Omid
Stabilization of Polymer Solar Cells and Their Importance in Photovoltaic Systems [Volume 34, Issue 2, 2021, Pages 99-129]
-
Mohammadi Arbati, S.
Functionalization of PP Wax with Maleic Anhydride by Gamma-ray [Volume 14, Issue 4, 2001]
-
Mohammadi Ghermezgoli, Zahra
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Mohammadi Roodbari, Motahareh
Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA) and Nanoclay [Volume 28, Issue 4, 2015, Pages 299-289]
-
Mohammadi Roshandeh, J.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Mohammadi Shojaa, M.
Properties and Behaviour of Hybrid Composites (FML) of Reinforced Polyester with Glass Fibers & Aluminium (GLALL)- An Experimental Study [Volume 14, Issue 5, 2002]
-
Mohammadian-Gezaz, S.
Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]
-
Mohammadian-Gezaz, Somayyeh
Effect of Graphene Nanoplatelets on Rheology, Tensile Properties and Curing Behavior of Nanocomposites Based on NBR/PVC Blends Prepared by Melt Intercalation Method [Volume 31, Issue 3, 2018, Pages 289-301]
-
Mohammadian Gazaz, S.
Investigation on Properties of CaCO3-filled Polypropylene for Thermoforming Application [Volume 19, Issue 3, 2006]
-
Mohammadnia, Zahra
Atom Transfer RaAtom Transfer Radical Polymerization of Methyl Methacrylate Using Bis(2-dodecylsulfanyl-ethyl)-Amine/Copper Bromide: Kinetic Study [Volume 31, Issue 2, 2018, Pages 143-154]
-
Mohammadzadeh Pakdel, Parisa
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Mohammdi, Behzad
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Mohebali, S.
To Control Bead Size Distribution in Suspension Polymerization [Volume 21, Issue 5, 2009, Pages 409-415]
-
Mohseni, M.
Adhesion Improvement of Epoxy Coating on Aluminium Substrate Using an Amino-Silane Compound [Volume 16, Issue 2, 2003]
-
Mohseni, M.
The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
-
Mohseni, M.
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Mohseni, M.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Mohseni, Mohsen
A Study of UV Resistance of a Water-based Polyurethane Lacquer Containing Nano Ceria [Volume 23, Issue 6, 2011, Pages 441-454]
-
Mohseni Lavi, R.
Thermal Degradation Kinetics of Phenolic Resins Used in Ablative Heat Shields [Volume 15, Issue 4, 2002]
-
Mohseniyan, S.H.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Mohsenzadeh, Rasol
Experimental Studies on Mechanical Properties and Thermal Behavior of Polyoxymethylene/CaCO3
NanoComposites [Volume 27, Issue 1, 2014, Pages 62-51]
-
Mohsenzadeh, Rasool
Evaluation of the Impact Resistance of POM/TPU/CB Three-Phase Nanocomposite for Application in Bumper Bracket [Volume 34, Issue 6, 2022, Pages 557-568]
-
Mohsenzadeh, Rasool
Experimental Study on Wear Behavior of Polyacetal Nanocomposite Gears [Volume 36, Issue 2, 2023, Pages 151-165]
-
Mojarad Jabali, Solmaz
Cross-linking of Poly(sodium acrylate)-Based Hydrogels by a Non-vinyl Cross-linker [Volume 29, Issue 2, 2016, Pages 185-196]
-
Mojtahedi, M.R.M.
Producing Dyeable Polypropylene Fibers with Blending PP/PET Blending PP/PET [Volume 13, Issue 2, 2000]
-
Mokhber Yousefabad, A.
Modification of Polyphenol - formaldehydes by Some Natural Oils [Volume 16, Issue 3, 2003]
-
Mokhtar, Javad
Electrospinning of Silk Fibroin/Β-Cyclodextrin Nanofibers for Controlled Drug Release [Volume 29, Issue 1, 2016, Pages 89-100]
-
Mokhtarani, N.
Comparison of Natural Polymers and Chemical Coagulants in the Reduction of Organic Load of Whey [Volume 15, Issue 2, 2002]
-
Mokhtarani, N.
Effect of Volatile Fatty Acids in Production of Polyhydroxyalkanoates by Activated Sludge [Volume 21, Issue 1, 2008, Pages 83-90]
-
Mokhtari, J.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Mokhtari, Javad
Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]
-
Mokhtari, Javad
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
-
Mokhtari Motameni Shirvan, Mozafar
Effect of Stabilization on Morphology Polystyrene and Supercritical Carbon Dioxide Thermoplastic Foams [Volume 28, Issue 6, 2016, Pages 515-505]
-
Mokhtari Motameni Shirvan, Mozafar
Morphological Parameters in Relation to the Electromagnetic Properties of Microcellular Thermoplastic Polyurethane Foam in X-Band Frequency Ranges [Volume 30, Issue 1, 2017, Pages 19-30]
-
Mokhtari Motameni Shirvan, Mozaffar
Dispersion of Zinc Oxide Nanoparticles in Polystyrene Matrix: Comparison of Rheological and Electrical
Properties [Volume 31, Issue 2, 2018, Pages 99-109]
-
Molaee, Morteza
Kinetic Theory of Fracture Strength in Prediction of Fatigue Lifetime of Epoxy/Carbon Fiber Composites [Volume 29, Issue 5, 2017, Pages 429-441]
-
Molahosseini, Hossein
Coating of Silk Fabric Using PVA/Ciprofloxacin Hcl Nanofibers for Biomedical Applications [Volume 29, Issue 2, 2016, Pages 171-184]
-
Molla-Abbasi, Payam
Porous Poly(vinyl alcohol)/Carbon Nanotube Sensitive Layer for Detection of Lung Cancer Biomarkers [Volume 33, Issue 2, 2020, Pages 147-158]
-
Monsef, Kamalodin
Modification of Structural Properties of Nanocomposite Membranes for Improving Dye Separation from Textile Effluents [Volume 31, Issue 5, 2019, Pages 475-492]
-
Monshi, A.
Application of Phenolic Resins in Refractories [Volume 9, Issue 1, 1996]
-
Montakhabi-Kalajahi, Saeed
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
-
Montasser Kouhsari, S.
Polysaccharide Biopolymers [Volume 7, Issue 2, 1994]
-
Montazar, M.
Structure Modification of Polyester 3-Deminsional Fabrics with β-Cyclodextrin and Citric Acid [Volume 21, Issue 4, 2008, Pages 297-305]
-
Montazer, M.
Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
-
Montazer, M.
Comparison of Different Methods of Denim Stone Washing by Pumice Stone, Acid Cellulases and Neutral Cellulases [Volume 20, Issue 4, 2007, Pages 369-380]
-
Montazer, M.
Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes
during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
-
Montazer, M.
Surface Modification of Polyester by Nano Titanium Dioxide in Alkaline Media and Their Synergism Effect on the Fabric [Volume 26, Issue 5, 2014, Pages 437-450]
-
Montazer, Majid
Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
-
Montazer, Majid
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Moosabeiki, Vahid
Manufacturing Method of Carbon/Phenolic Composites and its Implication on Ablative Charactristics [Volume 26, Issue 3, 2013, Pages 256-243]
-
Moosavi, S.A.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Moosavi, S.M.A.Ebrahimzadeh
Study on the Variations in the Physico-mechanical Properties of PET Bottles During Shelf-life of Carbonated Beverages and its Effect on Permeation of CO2 [Volume 17, Issue 6, 2005, Pages 343-339]
-
Moosavi shoshtari, A.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
-
Mootab Saei, Amir
Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
-
Moradi, Ayub
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
-
Moradi, Ayub
Synthesis of TiO2 Composite Nanofibers Doped with
Copper Oxide Nanoparticles through Electrospinning and Their Application in Photocatalytic Degradation of Pharmaceutical Wastewaters [Volume 33, Issue 6, 2021, Pages 465-478]
-
Moradi, Gholamreza
Design and Fabrication of Polyurethane Foams Modified with Rock Wool Fiber: The Effect of Reinforcement Amount on Acoustical and Mechanical Properties [Volume 35, Issue 2, 2022, Pages 97-109]
-
Moradi, Mahdi
Investigation of Mechanical and Thermal Properties of Polymer Composites Reinforced by Multi-Walled Carbon Nanotube for Reduction of Residual Stresses [Volume 27, Issue 3, 2014, Pages 230-213]
-
Moradi, Meysam
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Moradi, Salar
A Highly Toughened Poly(lactic acid)/Ethylene-co-Vinyl Acetate Blend with the Simultaneous Addition of Hydrophobic Nanoparticles and Compatibilizer [Volume 33, Issue 6, 2021, Pages 509-524]
-
Moradian, Ali
Synthesis Methods of In Situ Forming Injectable
Hydrogels and Their Applications in Tissue
Engineering: A Review [Volume 33, Issue 2, 2020, Pages 95-113]
-
Moradian, S.
Effect of Surface Pretreatment on Adhesion Strength and Corrosion Resistance of Powder Coated Aluminium [Volume 12, Issue 3, 1999]
-
Moradian, S.
Study of Thermal Behavior of Polyester and Epoxy/Polyester Powder Lacquers [Volume 16, Issue 5, 2004]
-
Moradian, S.
Synthesis and Characterization of Organic-Inorganic Polyacrylate-Silica Nanocomposites [Volume 20, Issue 4, 2007, Pages 381-390]
-
Moradian, Siamak
Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
-
Morady, Sadegh
Responses of Polystyrene/MWCNT Nanocomposites to Electromagnetic Waves and the Effect of Nanotubes Dispersion [Volume 27, Issue 3, 2014, Pages 201-193]
-
Morshed, M.
The Effects of Time, Temperature, Concentration of Enzyme and Fuzz on Weight Loss in Biopolishing of Cotton Fabrics [Volume 10, Issue 4, 1997]
-
Morshed, M.
Effect of Enzymatic Hydrolysis on the Weight Loss and Pilling of Cotton and Cotton/Polyester Fabrics [Volume 11, Issue 1, 1998]
-
Morshed, M.
Alkaline Hydrolysis of Polyester Fabrics in Alcoholic Sodium Hyroxide Solution [Volume 13, Issue 3, 2000]
-
Morshed, M.
The Study of Dyeing of Hydrolyzed Polyester Fibers: Investigation of Dyeing Behaviour of Hydrolyzed Polyester Fibers by Lipase [Volume 14, Issue 2, 2001]
-
Morshed, M.
Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes Enzymatic Hydrolysis of Cotton-polyester Fabric by Using Lipase and Cellulase Enzymes [Volume 15, Issue 3, 2002]
-
Morshed, M.
Effect of Microwave Heating on the Fine Structure of Polyester Filaments [Volume 15, Issue 4, 2002]
-
Morshed, M.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Morshed, M.
Study of the Effect of Heat Treatment on Nylon 66 Tire Cords Structure and its Physical Properties [Volume 20, Issue 2, 2007, Pages 109-117]
-
Morshed, M.
Effect of Drying Temperature of Polyester Chips on the Properties of Textured Yarn [Volume 18, Issue 3, 2005, Pages 171-180]
-
Morshed, M.
Electrospinning of Uniaxially Aligned and Molecularly Oriented Polyacrylonitrile Nanofibers with Divided Collectors [Volume 18, Issue 4, 2005, Pages 241-248]
-
Morshed, M.
Investigation of Parameters Affecting the Productivity of Electrospun
Polyacrylonitrile Nanofibers [Volume 19, Issue 2, 2006, Pages 121-130]
-
Morshed, M.
Study of Microstructure of Poly(ethylene terephthalate) Fibers by Exposing to Supercritical Carbon Dioxide [Volume 26, Issue 5, 2014, Pages 379-365]
-
Morshed, Mohamad
Fabrication of Antibacterial Poly(vinyl alcohol) Microfibers Mat for Wound Dressing Application [Volume 29, Issue 1, 2016, Pages 15-25]
-
Morshed, Mohammad
Coating of Silk Fabric Using PVA/Ciprofloxacin Hcl Nanofibers for Biomedical Applications [Volume 29, Issue 2, 2016, Pages 171-184]
-
Morshedian, J.
Investigation in the Propetry Improvements of PE Solid Wastes [Volume 4, Issue 3, 1991]
-
Morshedian, J.
An Investigation on Cure Kinetics of Phenolic-Novolac Resins [Volume 5, Issue 1, 1992]
-
Morshedian, J.
Qualitative and Quantitative Analysis of Modelling Wax and the Study of Its Production [Volume 8, Issue 3, 1995]
-
Morshedian, J.
Preparation and Characterization of Alginate Impression Materials in Dental Applications [Volume 8, Issue 4, 1995]
-
Morshedian, J.
Applications of High-Resolution Solid-State 13C NMR Spectroscopy to Polymers [Volume 10, Issue 2, 1997]
-
Morshedian, J.
Preparation of Silane Grafting and Crosslinking of Polyethylene: Studies of the Factors Affecting the Grafting and Crosslinking Processes [Volume 11, Issue 1, 1998]
-
Morshedian, J.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Morshedian, J.
The Effect of a- Cellulose Fiber on the Properties of Melamine-Formaldehyde Molding Compounds [Volume 14, Issue 1, 2001]
-
Morshedian, J.
On the Improvement of Physical and Mechanical Properties of PE by Crosslinking [Volume 14, Issue 2, 2001]
-
Morshedian, J.
Sioplas Crosslinking of PE: The Effect of EVA on Properties of XLPE [Volume 14, Issue 5, 2002]
-
Morshedian, J.
Kinetic Study of Cross-linking Reaction by Peroxide Method in LDPE Using DSC, a Rheometer and an Internal Mixer [Volume 15, Issue 2, 2002]
-
Morshedian, J.
Sioplas Crosslinking of Polyethylene: Study of the Effect of Alumina Trihydrate and Antimony Trioxide on Properties of XLPE [Volume 15, Issue 6, 2003]
-
Morshedian, J.
Investigation of the Effect of Electron Beam on Various Polyethylene Blends [Volume 16, Issue 2, 2003]
-
Morshedian, J.
Study on the Dynamic Rheological Behavior of Polyethylene Filled with Carbon Black [Volume 16, Issue 4, 2003]
-
Morshedian, Jalil
Elastomer Nanocomposites Reinforcements with Nanosilicon Carbide and Nanoclay Particles [Volume 31, Issue 1, 2018, Pages 43-55]
-
Mortazaei, Mehrzad
Polyvinyl Alcohol-Sulfonated Polyethersulfone Blend for Application in Proton-Exchange Membranes [Volume 29, Issue 5, 2017, Pages 405-414]
-
Mortazaei, Mehrzad
Synthesis of Benzoxazine Resin and Evaluating the Mechanical Properties of Epoxy-Benzoxazine-Silica Nanocomposites [Volume 32, Issue 5, 2020, Pages 439-448]
-
Mortazavi, M.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Mortazavi, M.M.
Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
-
Mortazavi, M.M.
Study of Ethylene Polymerization Kinetics by TiCl4/Mg(OC2H5)2 Catalyst and Determination of the Active
Sites Concentration [Volume 21, Issue 6, 2009, Pages 515-522]
-
Mortazavi, S. Mohammad Mehdi
1-Hexene Polymerization Using Ziegler-Natta Catalytic System with Response Surface Methodology [Volume 30, Issue 3, 2017, Pages 197-206]
-
Mortazavi, S.B.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Mortazavi, S.M.
Hot Mercerizing of Cotton/Polyester Blend Fabric: The Effect of some Factors on Dye and Moisture Absorption of the Fabric [Volume 19, Issue 2, 2006, Pages 101-109]
-
Mortazavi, S.M.A.
Investigation and Optimization of Mechanical and Morphological Properties of a Three-component PP/PU/EVA Blend Using Taguchi Experimental Design [Volume 19, Issue 2, 2006, Pages 91-99]
-
Mortazavi, S.M.M.
Synthesis of Metallocene Catalyst for Terpolymerization of Ethylene, Propylene and Diene [Volume 27, Issue 1, 2014, Pages 35-25]
-
Mortazavi, Seyed Mohammad Mehdi
A Study on the Effect of Catalyst Types on Microstructure of Ethylene/1-Hexene Copolymer by Thermal Fractionation [Volume 28, Issue 5, 2015, Pages 394-385]
-
Mortazavi, Seyed Mohammad Mehdi
Synthesis and Functionalization of α-Olefines (6 and 10 Carbons)/Maleic Anhydride Comb-like Copolymers and Their Application in Silica Nanohybrid and Hydrogel [Volume 33, Issue 6, 2021, Pages 537-551]
-
Mortezaee, M.
On the Compatibilization and Dynamic Vulcanization of POM/NBR Blends [Volume 14, Issue 3, 2001]
-
Mortezaeei, Mehrzad
Effect of Aromatic Amine Structure as a Curing Agent on Molecular Packing and Mechanical Properties of Cured Epoxy Resin [Volume 32, Issue 3, 2019, Pages 267-276]
-
Mortezaei, Hamideh
Evaluation of Parameters in Preparation of PVC/PU Blend Foams [Volume 29, Issue 2, 2016, Pages 157-170]
-
Mortezaei, M.
Effect of Surface Modification of Nanosilica on the Viscoelastic Properties of Its Polystyrene Nanocomposite [Volume 21, Issue 6, 2009, Pages 523-531]
-
Mortezaei, Mehrzad
Relationship Between the Process Parameters and Resin Content of a Glass/Epoxy Prepreg Produced by Dipping Method [Volume 27, Issue 6, 2015, Pages 402-391]
-
Mortezaei, Mehrzad
Improving Fracture Toughness of Epoxy Nanocomposites by Silica Nanoparticles [Volume 30, Issue 1, 2017, Pages 3-17]
-
Mortezaei, Mehrzad
Effect of Solid Epoxy Resin on Properties of an Epoxy/Glass Prepreg [Volume 34, Issue 5, 2022, Pages 485-497]
-
Mortezaei, Mehrzad
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
-
Mortezaie, M.
Leonov Constitutive Equation for Modeling of Rod Climbing in Viscoelastic Fluid [Volume 14, Issue 5, 2002]
-
Mortezaie, M.
Studying the Effective Parameters on Welding of Polyethylene Joints [Volume 16, Issue 3, 2003]
-
Mosalaaei, H.
Synthesis of Insoluble Polyorganosiloxanes and their Application for Heavy Metals Extraction [Volume 19, Issue 4, 2006]
-
Mosalmani, Reza
Preparation and Characterization of a Polymer Concrete and Estimation of Compressive Strength Using a Two-Phase Micromechanical Model [Volume 28, Issue 2, 2015, Pages 120-111]
-
Moshirnia, M.
Design and Manufacture of a Composite Leaf Spring [Volume 17, Issue 1, 2004]
-
Mosleh, Nastaran
Synthesis of Polyaniline/Graphene Oxide Composites with Different Morphologies and Investigation of Their Electrochemical Properties [Volume 29, Issue 5, 2017, Pages 469-477]
-
Moslemin, Mohammad Hosein
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Moslempoor, Mostafa
Hole-Transporting Materials Based on p-Type Polymers in Invert Perovskite Solar Cells [Volume 36, Issue 2, 2023, Pages 107-132]
-
Mostafazadeh, M.
The Effects of Filler Content and Water Absorption on Creep Behavior of HDPE Waste/MDF Flour Composites [Volume 21, Issue 1, 2008, Pages 53-59]
-
Motahari, S.
Residual Stresses in Polymer Composites with Continuous Fibers [Volume 18, Issue 5, 2006, Pages 325-330]
-
Motasadizadeh, Hamidreza
Cross-linking of Poly(sodium acrylate)-Based Hydrogels by a Non-vinyl Cross-linker [Volume 29, Issue 2, 2016, Pages 185-196]
-
Motiaai, Fereshteh
Determination of Gel Content (C-C Crosslink) in Polybutadiene Rubber by Differential Scanning Calorimetry [Volume 27, Issue 3, 2014, Pages 211-203]
-
Mottaghi, A.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Mouraki, Alireza
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Mousavi, Golshan
Modification and Performance Enhancement of PVC Ultrafiltration Membrane by Grafting of Sulfonated Polystyrene [Volume 33, Issue 3, 2020, Pages 243-254]
-
Mousavi, Seyed Mohammad
Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
-
Mousavi, Seyed Mohammad
Biological Reclaiming of Recycled Rubber and Its Effect on Mechanical Properties of New Rubber Vulcanizates [Volume 27, Issue 5, 2014, Pages 407-395]
-
Mousavi, Seyedeh Mohaddeseh
The Importance and Influence of Rheological Properties of Polymer Solutions in Phase Inversion Process and Morphology of Polymeric Membranes [Volume 28, Issue 5, 2015, Pages 371-351]
-
Mousavi Shoshtari, A.
Structural and Physical Properties of Filament Yarns Melt-Spun from PP/LDPE Blend Before and After False-Twist Texturing [Volume 21, Issue 1, 2008, Pages 9-18]
-
Mousavi Shoushtari, A.
Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
-
Mousavi Shoushtari, A.
Matrix-Fibril Morphology and Structure of Polyblend Fibers in Melt Spinning Process: A Review [Volume 21, Issue 5, 2009, Pages 367-388]
-
Mousazadeh, S.
The Effects of Reaction Variables on Solution Polymerization of Vinyl Acetate and Molecular Weight of Poly(vinyl alcohol) Using Taguchi Experimental Design [Volume 22, Issue 5, 2010, Pages 341-351]
-
Movahed, H.R.
Study of the Effect of Core-Twist Hybrid Yarn Glass/PET on Mechanical Properties of Unsaturated Polyester Resin [Volume 16, Issue 1, 2003]
-
Movahedifar, Fahimeh
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Mozafari, S.M.
Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]
-
Mozaffari, Sayed Morteza
Thermally-Latent Curing Agents for Epoxy Resins:
A Review [Volume 31, Issue 5, 2019, Pages 409-426]
-
Mozaffari, Seyed Morteza
Concentration Effect of Mcroencapsulated 1-Methyl Imidazole Curing Agent with Solid Epoxy Shell on Mechanical Properties of Epoxy Resin [Volume 34, Issue 6, 2022, Pages 523-532]
-
Moztarzadeh, F.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
N
-
N., M.
Preparation of Cellular Rigid PVC by Extrusion: Investigation on Processing Variables [Volume 8, Issue 4, 1995]
-
N. Famili, M. Hossien
The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
-
N. Famili, Mohamad Hossein
Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
-
N. KhaliIi, G.
Qualitative and Quantitative Analysis of Modelling Wax and the Study of Its Production [Volume 8, Issue 3, 1995]
-
Naalbandi, A.
Kinetics of Polyurethane Polymerization Using Differential Scanning Calorimetry [Volume 4, Issue 3, 1991]
-
Nademi, M.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Naderi, G.
The Compounding of Phenolic Nitrile Blends: I-Effect of Phenolic Resin [Volume 14, Issue 5, 2002]
-
Naderi, G.
The Compounding of Phenolic Nitrile Blends: II-Effect of Nitrile Elastomer Type [Volume 14, Issue 5, 2002]
-
Naderi, G.
Effect of Composition and Type of Phenolic Resin on Mechanical Properties andMorphology of Phenolic Nanocomposites [Volume 22, Issue 6, 2010, Pages 421-428]
-
Naderi, G.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Naderi, G.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Naderi, G.
Effect of Mixing Conditions on Mechanical and Physical Properties of Nanocomposites Based on NBR/PVC/Nanoclay [Volume 23, Issue 4, 2010, Pages 293-304]
-
Naderi, G.
Studies on Properties of Short Fiber Reinforced Natural Rubber Composites [Volume 21, Issue 3, 2008, Pages 259-267]
-
Naderi, Gasem
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Naderi, Gh.
Scale-up of Rubber Mixing Using Unit Work Method [Volume 13, Issue 3, 2000]
-
Naderi, Ghasem
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Naderi, Ghasem
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Naderi, Ghasem
Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
-
Naderi, Ghasem
Effect of Carbon Black Blends on the Mechanical Properties of a Tread Compound for Passenger Radial Tires [Volume 26, Issue 1, 2013, Pages 45-56]
-
Naderi, Ghasem
Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
-
Naderi, Ghasem
Optimization of Mechanical, Dynamical and Thermal Properties of a High Performance Tread Compound for Radial Tires [Volume 26, Issue 2, 2013, Pages 125-138]
-
Naderi, Ghasem
Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
-
Naderi, Ghasem
Steady State Analysis and Prediction of Rolling Resistance for a Moving Radial Tire Using Hyper-Viscoelastic Model [Volume 27, Issue 3, 2014, Pages 240-231]
-
Naderi, Ghasem
Computer Simulation and Experimental Study of Deformation in a Radial Tire under Different Static Loads Using Finite Element Method [Volume 27, Issue 4, 2014, Pages 336-325]
-
Naderi, Ghasem
Numerical Modeling and Experimental Study of Elastic-Plastic Behavior of Carbon Nanotubes Reinforced Nanocompsites of PA6/NBR Using a Microfinite Element Model [Volume 27, Issue 5, 2014, Pages 421-409]
-
Naderi, Ghasem
A Theoretical and Experimental Investigation of Mechanical Behavior of Steel-Rubber Long Fiber Composites Using Finite Element Method and Analytical Models [Volume 29, Issue 2, 2016, Pages 139-155]
-
Naderi, Ghasem
Mechanical and Morphological Properties of Short Nylon Fibers and Carbon Nanotubes Reinforced NR/SBR Nanocomposites [Volume 31, Issue 4, 2018, Pages 345-357]
-
Naderi, Ghasem
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Naderi, Ghasem
Experimental Investigation of Mechanical Properties, Fracture Mechanism and Crack Propagation of PA6/NBR/Clay Nanocomposites [Volume 33, Issue 2, 2020, Pages 159-172]
-
Naderi, Ghasem
Multiscale Modeling of Mechanical Properties of Green Tire Tread Compound [Volume 36, Issue 2, 2023, Pages 177-189]
-
Naderi, N.
Effect of Initiator on Thermal Curing of Unsaturated Polyester Resins [Volume 23, Issue 5, 2011, Pages 415-422]
-
Naeimian, F.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Nafisi, Siavash
Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
-
Naghavi Ilkhichi, , Peyman
Effect of Glycerol in Soft and Hard Segments on Properties of Shape Memory Polyurethane [Volume 36, Issue 2, 2023, Pages 191-203]
-
Naimi - Jamal, Mohammad Reza
Fire Performance of Intumescent Flame Retardant/Nanosilica/Thermoplastic Polyurethane Composite:
A Study on Synergism [Volume 36, Issue 1, 2023, Pages 73-86]
-
Naimian, F.
Effects of Gamma Radiation on Polymeric Materials of Disposable Medical Supplies at Sterilizing Doses [Volume 7, Issue 3, 1994]
-
Naimian, F.
The Role of Solvent on Radiation Degradation and Antibacterial Activity of Chitosan Against Pectobacterium Carotovorum [Volume 23, Issue 4, 2010, Pages 305-310]
-
Naimpoor, F.
Preparation of Pullulan Biopolymer and Kinetics of Its roduction [Volume 7, Issue 3, 1994]
-
Najafi, Hossein
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
-
Najafi, M.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Najafi, M.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Najafi, M.
Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
-
Najafi, M.
Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
-
Najafi, M.
Intermediate Radical Termination Theory in Elucidation of RAFT Kinetics and Comparison to Experimental Data [Volume 21, Issue 6, 2009, Pages 503-513]
-
Najafi, M.
Employing Moment Equations Model to Study the Effect of Different Active Centers on Homopolymerization Kinetics of Ethylene [Volume 21, Issue 5, 2009, Pages 431-444]
-
Najafi, M.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Najafi, M.
Investigating the Effect of Different Kinetic Parameters on UHMWPE Synthesis [Volume 21, Issue 2, 2008, Pages 141-148]
-
Najafi, Mohsen
Anti-Bacterial Microgel Synthesis: Sonochemical Modification of Carbopol for Hygienic Applications [Volume 33, Issue 6, 2021, Pages 525-535]
-
Najafian, Sh.
Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
-
Najafian, Shila
Conductive Nanofibrous Scaffolds Based on Tragacanth Gum, Polyaniline, and Poly(vinyl alcohol): Fabrication, Characterization and Exploring
Their Potential Application in Skin Tissue Engineering [Volume 36, Issue 3, 2023, Pages 259-279]
-
Najafloo, Behzad
Effect of Through-the-Thickness Yarn Fineness and Distanceon Damage Behavior of Carbon-Phenolic 3D Composites [Volume 27, Issue 5, 2014, Pages 448-441]
-
Najafpour, Mahdi
Fabrication of Bi-layer Polyethersulfone-based Nanofiltration Membrane Using Chitosan/Zeolite Nanocomposite Layer [Volume 36, Issue 4, 2024, Pages 393-407]
-
Nakhaei, Alireza
Study of Abrasion of Rubber Materials by Experimental Design, Response Surface and Artificial Neural Network Modeling [Volume 28, Issue 3, 2015, Pages 209-197]
-
Nakhaei, Mohammad Reza
Experimental Investigation of Mechanical Properties, Fracture Mechanism and Crack Propagation of PA6/NBR/Clay Nanocomposites [Volume 33, Issue 2, 2020, Pages 159-172]
-
Nalbandi, A.
A Study on Melt Fracture and Its Effect on Limiting the Output in A Study on Melt Fracture and Its Effect on Limiting the Output in Extrusion Process of LLDPE [Volume 14, Issue 4, 2001]
-
Namazi, H.
Determination of the Chemical Reactivity Ratios of Acrylamide and 2- Vinyl Pyridine in Copolymerization Reaction [Volume 3, Issue 1, 1990]
-
Namazi, H.
Studies on the Doping of Polyaniline with Organic Acids by UV-Vis Spectroscopy [Volume 17, Issue 1, 2004]
-
Namdarpour Bengar, Elahe
Optimization of Gas Barrier Properties of Nanocomposites of HDPE/Nanoclay Using
Response Surface Methodology [Volume 33, Issue 1, 2020, Pages 25-39]
-
Narengi, M.R.Golkar
Dynamic Modelling of Extrusion Dies by Finite Volume Method [Volume 9, Issue 4, 1996]
-
Naseri, I.
Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
-
Naseri, Iman
Thermal Protection Performance of Carbon Aerogels Filled with Magnesium Chloride Hexahydrate as a Phase Change Material [Volume 26, Issue 6, 2014, Pages 535-525]
-
Nasir, Vahid
An Estimation of Longitudinal Strength Reduction of Unidirectional E-glass/Epoxy Composite Exposed to Sulfuric Acid Using a Micromechanics Model [Volume 25, Issue 2, 2012, Pages 91-101]
-
Nasiri, A.
Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
-
Nasiri, A.R.
Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
-
Nasiri, Ali reza
Synthesis and Characterization of Native Lignin/Acrylamide-Based Copolymers Obtained by Graft Radical Polymerization [Volume 30, Issue 6, 2018, Pages 501-516]
-
Nasiri, M.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Nasiri, Morteza
Effective Parameters on Reaction Kinetics and Particle Size in the Suspension Polymerization of Styrene in the Presence of Graphite [Volume 33, Issue 2, 2020, Pages 137-146]
-
Nasiri*, Ali Reza
Performance of Partially-Hydrolyzed Polyacrylamide in Water Based Drilling Fluids [Volume 26, Issue 1, 2013, Pages 3-13]
-
Nasisrizadeh, Navid
Physicomechanical Properties, Release Behavior and Cell Proliferation of PVA/Agar/PEG Hydrogel Containing Aloe Vera [Volume 34, Issue 1, 2021, Pages 69-80]
-
Nasouri, Komil
Determination of Morphological and Microstructural Properties of Polyacrylonitrile/Single-Walled Carbon Nanotubes Composite Nanofibers [Volume 27, Issue 4, 2014, Pages 279-267]
-
Nasouri, Komil
Effect of Multi-Walled Carbon Nanotubes' Aspect Ratio and Purity on the Surface Morphology and Electrical Properties of Composite Nanofibers [Volume 31, Issue 3, 2018, Pages 275-287]
-
Nassiri, F.
Infuence of Electrochemical Protonation and Doping on the Electrical Conductivity of BasicPolyaniline [Volume 6, Issue 4, 1993]
-
Nateghi-Boroujeni, Iman
Experimental Study on the Effect of Pentanediol as a Chain Extender on the Mechanical Properties of MDI Polyurethane Foams [Volume 32, Issue 4, 2019, Pages 317-326]
-
Navaee ardeh, Sh.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Navarchian, Amir
Anticorrosion Self-Healing Polymer Coatings Containing Micro/Nanofibers with Core-Shell Microstructures: A Review [Volume 36, Issue 5, 2023, Pages 527-537]
-
Navarchian, M.H.
The Effects of Reaction Variables on Solution Polymerization of Vinyl Acetate and Molecular Weight of Poly(vinyl alcohol) Using Taguchi Experimental Design [Volume 22, Issue 5, 2010, Pages 341-351]
-
Naveed, M.H.
Leonov Constitutive Equation for Modeling of Rod Climbing in Viscoelastic Fluid [Volume 14, Issue 5, 2002]
-
Naveed Family, M.H.
On the Compatibilization and Dynamic Vulcanization of POM/NBR Blends [Volume 14, Issue 3, 2001]
-
Navid Chakherlou, Tajbakhsh
Experimental Study on Wear Behavior of Polyacetal Nanocomposite Gears [Volume 36, Issue 2, 2023, Pages 151-165]
-
Navid Famili, M. Hossein
Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
-
Navid Famili, M.H.
Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
-
Navid Famili, M.H.
Effect of Surface Modification of Nanosilica on the Viscoelastic Properties of Its Polystyrene Nanocomposite [Volume 21, Issue 6, 2009, Pages 523-531]
-
Navid Famili, Mohamad Hosein
Prediction of Bubble Size Distribution in a Batch Foaming System of Polystyrene-Supercritical CO2 [Volume 36, Issue 4, 2024, Pages 437-450]
-
Navid Famili, Mohamad Hossein
Numerical Simulation and Visual Evaluation of the Mixing of Polymer Fluids in Twin Screw Extruder Based on Components Miscibility [Volume 32, Issue 1, 2019, Pages 55-64]
-
Navid Famili, Mohammad Hoessein
Dispersion of Zinc Oxide Nanoparticles in Polystyrene Matrix: Comparison of Rheological and Electrical
Properties [Volume 31, Issue 2, 2018, Pages 99-109]
-
Navid Famili, Mohammad Hossein
Preparation of Porous Thermoset Polyurethane with Supercritical CO2 as Non-solvent [Volume 28, Issue 2, 2015, Pages 109-101]
-
Navid Famili, Mohammad Hossein
The Effect of Foaming Process on the Radar Absorbing Properties of PMMA/MWCNT Composites [Volume 28, Issue 3, 2015, Pages 195-189]
-
Navid Famili, Mohammad Hossein
Effect of Stabilization on Morphology Polystyrene and Supercritical Carbon Dioxide Thermoplastic Foams [Volume 28, Issue 6, 2016, Pages 515-505]
-
Navid Famili, Mohammad Hossein
Control of Foam Structure in PolyStyrene-Nanosilica-Carbon Dioxide: Effect of Temperature and Nanoparticles [Volume 29, Issue 1, 2016, Pages 73-88]
-
Navid Famili, Mohammad Hossein
Evaluation of Parameters in Preparation of PVC/PU Blend Foams [Volume 29, Issue 2, 2016, Pages 157-170]
-
Navid Famili, Mohammad Hossein
Morphological Parameters in Relation to the Electromagnetic Properties of Microcellular Thermoplastic Polyurethane Foam in X-Band Frequency Ranges [Volume 30, Issue 1, 2017, Pages 19-30]
-
Navid Famili, Mohammad Hossein Navid Famili
Responses of Polystyrene/MWCNT Nanocomposites to Electromagnetic Waves and the Effect of Nanotubes Dispersion [Volume 27, Issue 3, 2014, Pages 201-193]
-
Nazaran, P.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Nazari, A.
Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
-
Nazari, H.
The Analysis of Static and Dynamic Stresse, Natural Frequencies and Failure of Composite and Metallic Bicycle Frames by Using Bicycle Frames by Using Bicycle Frames by Using Finite Element Method [Volume 15, Issue 3, 2002]
-
Nazari, Kobra
Cellulose Modification Through Grafting of Polyacrylonitrile by Atom Transfer Radical Polymerization [Volume 28, Issue 4, 2015, Pages 332-323]
-
Nazari, Mohammad
Parameters Affecting the Crystalinity of Poly (vinyl alcohol) Prepared at Different Reaction Conditions [Volume 27, Issue 4, 2014, Pages 311-299]
-
Nazarzadeh Zare, Ehsan
Fabrication and Characterization of Dextrin-g-Polypyrrole/Graphene Oxide Nanocomposite for Effective Removal of Pb (II) and Methylene Blue Dye from Aqueous Solutions [Volume 30, Issue 5, 2018, Pages 447-462]
-
Nazarzadeh Zare, Ehsan
Rhodamine B Dye Removal from Aqueous Solutions Using Poly(N-vinylpyrrolidone-co-maleic anhydride)/Rice Husk Biocompatible Nanocomposite: Isothermal, Kinetics and Thermodynamic Studies [Volume 31, Issue 1, 2018, Pages 81-92]
-
Nazarzadeh Zare, Ehsan
Study of Nonlinear Properties of Poly(m-phenylene diamine)@BaTiO3 Nanocomposite for Laser Application [Volume 34, Issue 6, 2022, Pages 533-546]
-
Nazifi, Sajjad
The Effect of Process Parameters on the Synthesis of Thermoplastic Polyurethane Elastomer Through Reactive Melt Blending [Volume 33, Issue 1, 2020, Pages 41-49]
-
Nazock, H.
Effect of Mixing Ratio and Compatibilizer on Rheological, Morphological and Thermal Properties of Polypropylene/Nylon 6 Alloy [Volume 14, Issue 4, 2001]
-
Nazockdast, H.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
-
Nazockdast, Hossein
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Nazokdast, H.
Morphology Control in Cellulose Acetate Membrane [Volume 11, Issue 4, 1998]
-
Nehchiri, F.
An Overwiew on Spectroscopy Methods IR and their Applications on the Identification of Polymers [Volume 3, Issue 1, 1990]
-
Nehzat, M.S.
Emulsion Copolymerization of Methyl Methacrylate and Butyl Acrylate: The Study of Effective Parameters on Resin Formation and its Physical Properties [Volume 19, Issue 4, 2006]
-
Nejabat, G.R.
Preparation of Silicious Mesoporous Spherical and Rod- Like MCM-41 Using Cetyltrimethylammonium Bromide
as the Structure Directing Agent [Volume 21, Issue 3, 2008, Pages 243-250]
-
Nejabat, Gholam-Reza
Ziegler-Natta Catalyst Preparation Process: Influential Parameters on Particles Morphology and Activity of Catalyst in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 219-209]
-
Nekomanesh, Mehdi
Synthesis of Isotactic Polybutene-1 with Ziegler-Natta Catalyst [Volume 35, Issue 2, 2022, Pages 163-174]
-
Nekoomanesh, M.
Synthesis and Characterization of Bisphenol A-glycidyl Methacrylate Monomer and Study of the Physical and Mechanical Properties of Its Dental Composite [Volume 15, Issue 5, 2003]
-
Nekoomanesh, M.
Study of Variation in Chemical Composition of EPDM Elastomers Synthesized with Ziegler-Natta Catalyst Based on Vanadium During Terpolymerization [Volume 16, Issue 5, 2004]
-
Nekoomanesh, M.
Process Conditions in Preparation of MgCl2 Adduct on Crystalline Structure of the Support in ZN Catalyst [Volume 23, Issue 2, 2010, Pages 171-179]
-
Nekoomanesh, M.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Nekoomanesh, M.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Nekoomanesh, M.
Preparation of Silicious Mesoporous Spherical and Rod- Like MCM-41 Using Cetyltrimethylammonium Bromide
as the Structure Directing Agent [Volume 21, Issue 3, 2008, Pages 243-250]
-
Nekoomanesh, M.
Slurry Polymerization of Ethylene in the Presence of Fatty Amine Anti-fouling by Ziegler-Natta Catalyst through a 23 Full Factorial Experimental Design [Volume 18, Issue 4, 2005, Pages 219-227]
-
Nekoomanesh, M.
Synthesis of Metallocene Catalyst for Terpolymerization of Ethylene, Propylene and Diene [Volume 27, Issue 1, 2014, Pages 35-25]
-
Nekoomanesh, M.H.
Study on Ethylene Polymerization by Active Ziegler?Natta Catalyst Based TiCl4 Supported on Mg(OEt)2 [Volume 10, Issue 3, 1997]
-
Nekoomanesh, M.H.
Using Different Methods to Determine Monomer Reactivity Ratios in Styrene/Acrylonitrile Copolymer [Volume 12, Issue 1, 1999]
-
Nekoomanesh, M.H.
Mathematical Model for Determination of Kinetic Behaviour of Styrene Polymerization [Volume 12, Issue 2, 1999]
-
Nekoomanesh, Mehdi
Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
-
Nekoomanesh-Haghighi, Mehdi
MgCl2 Support Preparation Techniques and Their Effects on Ziegler-Natta Catalysts Performance in Propylene Polymerization [Volume 26, Issue 3, 2013, Pages 266-257]
-
Nekoomanesh-Haghighi, Mehdi
The Use of Electron Donors to Increase Stereospecificity in Ziegler-Natta Propylene Polymerization [Volume 29, Issue 2, 2016, Pages 105-125]
-
Nekoomanesh Haghighi, M.
Light-Cure Dental Composites: A Review [Volume 9, Issue 3, 1996]
-
Nekoomanesh Haghighi, M.
Synthesis and Characterization of Emulsion Copoly(Butylacrylate-Methyl methacrylate) [Volume 10, Issue 1, 1997]
-
Nekoomanesh Haghighi, M.
The Substitution of High-Cis Polybutadiene Instead of Low-Cis Types in Production of High Impact Polystyrene [Volume 14, Issue 5, 2002]
-
Nekoomanesh Haghighi, M.
Azeotropic Styrene-acrylonitrile Suspension Polymerization at Atmospheric Pressure [Volume 15, Issue 6, 2003]
-
Nekoomanesh Haghighi, M.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
-
Nekoomanesh Haghighi, M.
Ethylene Homopolymerization by Ziegler-Natta (TiCl4/MgCl2) Catalyst through Full Factorial Experimental Design [Volume 22, Issue 5, 2010, Pages 353-362]
-
Nekoomaneshesh, M.
Microstructure Determination of Styrene/Butyl Acrylate Copolymer by 13C Nuclear Magnetic Resonance Spectroscopy [Volume 9, Issue 1, 1996]
-
Nematei Lay, Ebrahim
Preparation and Evaluation of Polymer Aerogel
Adsorbents Based on Polyacrylonitrile Fibers to
Remove Oil Contaminants from Seawater [Volume 34, Issue 3, 2021, Pages 299-311]
-
Nemati, Mahsa
Surface Modification of Cation Exchange Membranes Using Chitosan-co-PANI/Graphene Oxide Nanocomposite Layer [Volume 31, Issue 5, 2019, Pages 435-446]
-
Nemati, saeed
Effect of Rigid Polyurethane Foam Core Density on Flexural and Compressive Properties of Sandwich Panels with Glass/Epoxy Faces [Volume 23, Issue 1, 2010, Pages 3-16]
-
Nezadi, Maryam
Optimization of Polyurethane Scaffolds by Taguchi Design of Experiments for Vascular Tissue Engineering Applications [Volume 33, Issue 5, 2021, Pages 419-433]
-
Nik Akhtar, A.
Mathematical Model for Determination of Kinetic Behaviour of Styrene Polymerization [Volume 12, Issue 2, 1999]
-
Nikooamal, Hamid Reza
Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
-
Nikoofard, H.
Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Influence of Electropolymerization Conditions on the Electrochemical Behaviour and Film Morphology of Polypyrrole Polypyrrole [Volume 10, Issue 2, 1997]
-
Nikoofard, H.
Influence of Stabilizers on the Electroactivity and Morphology of Polypyrrole Film [Volume 10, Issue 3, 1997]
-
Nikrai, J.
A Comparative Study on Creep Behavior of Wood Flour-Polypropylene Composite, Medium Density Fiberboard (MDF) and Particleboard [Volume 22, Issue 5, 2010, Pages 363-371]
-
Nodehi, A.
Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
-
Nodehi, A.O.
Simulation of the Film Blowing Extrusion Process: An Investigation on Heat Transfer and Deformation [Volume 13, Issue 3, 2000]
-
Nodehi, Azizolah
Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
-
Nodehi, Azizollah
Effect of Salt on Gelation Behavior of Injectable Nanocomposite Scaffold Based on Hydroxypropyl Methylcellulose and Hydroxyapatite/Tricalcium Phosphate Nanoparticles [Volume 27, Issue 2, 2014, Pages 109-99]
-
Nodehi, Azizollah
Properties of Nitrile Rubber/Clay Nanocomposites Prepared by In-Situ Emulsifier-free Emulsion Polymerization [Volume 28, Issue 3, 2015, Pages 242-233]
-
Nodehi, Azizollah
Temperature-Responsive Hydrogels: Materials, Mechanisms and Biological Applications [Volume 31, Issue 3, 2018, Pages 211-237]
-
Nohekhan, Mojtaba
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
-
Nömani, H.
Study of the Effect of Acetic Acid and Polyethylene Glycol on Morphology and Performance of Polyvinyl Alcohol Membrane [Volume 16, Issue 1, 2003]
-
Noori, M.
Comparison of the Electrical Conductivity of Textile Fibers Coated with
Polyaniline and Polypyrrole [Volume 18, Issue 5, 2006, Pages 291-301]
-
Noori, Maryam
Effective Parameters on the Formation of Natural
Zeolite-Based Granules to Remove Cationic Dyes
from Contaminated Water [Volume 34, Issue 3, 2021, Pages 267-279]
-
Noormohammad, Asma
Porous Poly(vinyl alcohol)/Carbon Nanotube Sensitive Layer for Detection of Lung Cancer Biomarkers [Volume 33, Issue 2, 2020, Pages 147-158]
-
Noruzi, Mohamadreza
Fabrication of Antibacterial Poly(vinyl alcohol) Microfibers Mat for Wound Dressing Application [Volume 29, Issue 1, 2016, Pages 15-25]
-
Nosratzadegan, Keyvan
Synthesis and Characterization of Low Density PMMA-based Microballoons [Volume 25, Issue 6, 2013, Pages 467-475]
-
Nourani, M.
The Use of Reclaimed Rubber in Rubber Compounds for Optimized Applications [Volume 16, Issue 1, 2003]
-
Nourbakhsh, S.M.S.
The Effect of Argon Laser Wavelength and Radiant Intensity on the Physical and Mechanical Properties of Dental Resin [Volume 19, Issue 5, 2007]
-
Nouri, A.
Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
-
Nouri, Arezou
Elucidation of Chemical Structure of Wood Lignin by Dissolving in 1-Butyl-3-methylimidazolium Chloride Ionic Liquid [Volume 24, Issue 4, 2011, Pages 279-289]
-
Nouri, M.
A Review of Cellulose Solvents for Man-Made Fiber Production [Volume 7, Issue 4, 1994]
-
Nouri, M.
Alkaline Hydrolysis of Polyester Fibers: A Review [Volume 8, Issue 4, 1995]
-
Nouri, M.
Wet Spun Blend Fibers of Silk Fibroin and Polyamide 6 [Volume 19, Issue 5, 2007, Pages 369-376]
-
Nouri, M.
Structural Characterization of Electrically Conductive Nanofibers of Polyaniline/Copolyacrylonitrile Blend [Volume 22, Issue 3, 2009, Pages 217-224]
-
Nouri, M.
The Electrical Conductivity of Stretched Polyaniline and Polypyrrole Coated Yarns [Volume 22, Issue 5, 2010, Pages 373-379]
-
Nouri, M.
Solvent Texturing of Polyester Yarns Using Trichloroacetic Acid/Methylene Chloride [Volume 20, Issue 5, 2008, Pages 429-436]
-
Nouri, mahdi
Core/Shell Nanofibers of Silk Fibroin/Polyvinyl Alcohol: Structure and Controlled Release Behavior [Volume 30, Issue 6, 2018, Pages 473-488]
-
Nouri, Mahdi
Chromic Behavior of Conductive Poly(3-Methylthiophene) Nanoparticles-Coated Polyester Fabric [Volume 25, Issue 4, 2012, Pages 277-287]
-
Nouri, Mahdi
Electrospinning of Silk Fibroin/Β-Cyclodextrin Nanofibers for Controlled Drug Release [Volume 29, Issue 1, 2016, Pages 89-100]
-
Nouri, Mehdi
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
-
Nouri-Ahangarani, Farshid
The Use of Electron Donors to Increase Stereospecificity in Ziegler-Natta Propylene Polymerization [Volume 29, Issue 2, 2016, Pages 105-125]
-
Noushirvani, Nooshin
Comparison of Tensile, Permeability and Color Properties of Starch-based Bionanocomposites Containing Two Types of Fillers: Sodium Montmorilonite and Cellulose Nanocrystal [Volume 24, Issue 5, 2012, Pages 391-402]
O
-
Ogy, J.
Preparation of Polyethylene Glycol with Low Ash Content [Volume 13, Issue 2, 2000]
-
Ohadi Hamedani, Abdolreza
Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core [Volume 29, Issue 1, 2016, Pages 55-72]
-
Omidian, H.
Electrically Conducting Polymers [Volume 2, Issue 2, 1989]
-
Omidian, H.
Honeycombs [Volume 4, Issue 1, 1991]
-
Omidian, H.
The Study of the Parametrs Affecting the Choice of Adhesive in Sandwich Panels and Honeycombs [Volume 4, Issue 4, 1991]
-
Omidian, H.
Preparation and Optimization of Nitrile-phenolic Structural Adhesives [Volume 5, Issue 1, 1992]
-
Omidkhah, M.R.
Study of Catalyst, Aging Time and Surfactant Effects on Silica Inorganic Polymer Characteristics [Volume 20, Issue 2, 2007, Pages 147-153]
-
Omidkhah, Mohammad Reza
DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
-
Omidkhah, Mohammadreza
CO2/CH4 Separation by a Mixed Matrix Membrane of Polymethylpentyne/MIL-53 Particles [Volume 27, Issue 4, 2014, Pages 351-337]
-
Omidkhah, Mohammadreza
Effect of Amine-Functionalized MIL-53 Metal Organic Frameworks on the Performance of Poly(4-methyl-1-pentyne) Membrane in CO2/CH4 Separation Gas Mixture [Volume 28, Issue 2, 2015, Pages 147-131]
-
Omidkhah, Mohammadreza
A Mixed Matrix Membrane of Poly (4-methyl-1-pentyne) Filled with MIL 53 Particles and Its Application in Carbon Dioxide and Nitrogen Separation [Volume 29, Issue 2, 2016, Pages 127-138]
-
Omidkhah, Mohammadreza
Fabrication Parameters of Asymmetric Mixed Matrix Matrimid-MIL-53/PMHS Membrane for CO2/CH4 Separation [Volume 30, Issue 1, 2017, Pages 63-73]
-
Omidvar, A.
Investigation on the Effect of Type, Quantity and Size of Straw Particles on the Mechanical Properties of Crops Straw-High Density Polyethylene Composites [Volume 19, Issue 4, 2006]
-
Omrani, Ismail
Solubility and Phase Transfer of Insoluble Dyes in Organic Solvent by Polyurethane Reverse Micelle [Volume 34, Issue 5, 2022, Pages 443-455]
-
Omrani fard, Hesam
Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
-
Omranifard, Hesam
Pyrolysis of Bioplastics Based on Bovine Gelatin-Potato Flour and Whey Protein-Potato Flour Blends and Their
Kinetics and Thermodynamic Analysis [Volume 31, Issue 6, 2019, Pages 575-592]
-
Orang, F.
Effect of Physical Environment on Chondrocytes Seeded onto a Biodegradable Polyurethane Scaffold for Articular Cartilage Tissue Engineering [Volume 18, Issue 6, 2006, Pages 383-390]
-
Oromehie, A.
Effect of Mixing Ratio and Compatibilizer on Rheological, Morphological and Thermal Properties of Polypropylene/Nylon 6 Alloy [Volume 14, Issue 4, 2001]
-
Oromiehi, A.R.
Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]
-
Oromiehie, A.
Recycling of PET Beverage Bottles and Studies on its Crystallinity, Mechanical and Rheological Properties [Volume 14, Issue 6, 2002]
-
Oromiehie, A.
Morphology and Rheological, Thermal and Thermomechanical Properties of PP/PET Blends [Volume 16, Issue 6, 2004]
-
Oromiehie, A.R.
Crystallization Behavior of PA6 in ABS/PA6 Blends Prepared by In Situ Polymerization and Compatibilization Method [Volume 22, Issue 6, 2010, Pages 469-482]
-
Oromiehie, Abdulrasoul
Films Based on Poly(lactic acid) Biopolymer: Effect of Clay and Cellulosic Nanoparticles on their Physical, Mechanical and Structural Properties [Volume 25, Issue 2, 2012, Pages 127-136]
-
Oromiehie, Abdulrasoul
Mechanical Properties and Biodegradability of Polypropylene/Starch Reinforced Nanoclay Blends [Volume 26, Issue 2, 2013, Pages 139-148]
-
Oroumehi, A.
An Overwiew on Spectroscopy Methods IR and their Applications on the Identification of Polymers [Volume 3, Issue 1, 1990]
-
Otadi, Mayram
Superabsorbent Sulfonated Polyacrylamide/Aluminum Nitrate Hydrogel: Swelling, Mechanical, Thermal and Structural Properties [Volume 30, Issue 5, 2018, Pages 419-433]
P
-
Pakian, Sarvenaz
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Pakizeh, M.
Study of Catalyst, Aging Time and Surfactant Effects on Silica Inorganic Polymer Characteristics [Volume 20, Issue 2, 2007, Pages 147-153]
-
Pakseresht, Maryam
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Pakzad, Mousa
Cellulose Modification Through Grafting of Polyacrylonitrile by Atom Transfer Radical Polymerization [Volume 28, Issue 4, 2015, Pages 332-323]
-
Palashi, M.
Ring-opening Bulk-melt Polymerization of Poly(L-lactide) [Volume 16, Issue 4, 2003]
-
Parvazinia, M.
The Temperature Control of Batch Polymerization Reactors [Volume 4, Issue 2, 1991]
-
Parvazinia, M.
Experimental Study of Particle Size Distribution in Suspension Polymerization [Volume 14, Issue 3, 2001]
-
Parvazinia, M.
Effect of Diluent Type and Composition and the Amount of Cross-linking Agent on Bulk and Surface Morphology of Macroporous Styrene-Divinylbenzene Copolymer [Volume 19, Issue 5, 2007]
-
Parvin, A.
Manufacture and Investigation of Mechanical Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers [Volume 16, Issue 1, 2003]
-
Parvin, Ali
Preparation of NR/BR Compound Using ZnO Nanoparticles [Volume 22, Issue 2, 2009, Pages 117-124]
-
Parvinzadeh Gashti, Mazeyar
Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
-
Parvizian, Fahime
Surface Modification of Nanofiltration Membrane Using Poly(vinyl alcohol) and Chitosan-Functionalized Activated Carbon Nanoparticles [Volume 34, Issue 4, 2021, Pages 349-358]
-
Payamani, Mahdi
Synthesis and Characterization of 4,4'-Bis(maleimido)diphenylmethane Resin and Evaluation of Its Curing Behavior in Blending with Epoxy [Volume 35, Issue 4, 2023, Pages 339-352]
-
Payami, A.
The Substitution of High-Cis Polybutadiene Instead of Low-Cis Types in Production of High Impact Polystyrene [Volume 14, Issue 5, 2002]
-
Payami, A.
Improvement in Char Formability of Phenolic Resin for Development of Carbon/Carbon Composites [Volume 21, Issue 2, 2008, Pages 127-132]
-
Pazoki, S.
The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
-
Pazokifard, Shahla
Surface Modification of Silica Nanoparticles with Titanium Tetraisopropoxide and Evaluation of their Photocatalytic Activity [Volume 25, Issue 3, 2012, Pages 221-230]
-
Pazokifard, Shahla
Effect of Benzoyl Peroxide Content on Physical and Mechanical Properties of a Two-Component Methylmethacrylate-based Traffic Paint [Volume 30, Issue 6, 2018, Pages 547-555]
-
Pazooki, M.
Damping of Mechanical Waves with Styrene/Butadiene Rubber Filled with Polystyrene Particle: Effects of Particles Size and Wave Frequency [Volume 20, Issue 3, 2007, Pages 227-234]
-
Pazookifard, Sh.
Application of Silane Compounds for Improving Adhesion of a Silicone
Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
-
Peighambardoust, Seyed Jamaleddin
Epoxy-Based Composite Adhesive Containing Silver Coated Copper Powder: Preparation and Evaluation of Its Electrical Properties [Volume 30, Issue 1, 2017, Pages 53-61]
-
Peighambardoust, Seyed Jamaleddin
Physical, Mechanical and Antibacterial Properties of Nanobiocomposite Films Bosed on Carboxymethyl Cellulose/Nanoclay [Volume 30, Issue 6, 2018, Pages 557-572]
-
Peighambardoust, Seyed Jamaleddin
Synthesis and Performance Evaluation of Carboxymethyl Cellulose Nanocomposite Hydrogel Adsorbent Grafted with Acrylic Acid and Itaconic Acid Copolymer Containing Carbon Black Nanoparticles for Fuchsin Removal [Volume 35, Issue 1, 2022, Pages 39-51]
-
Peyravi, Majid
Fabrication and Investigation of Polyamine Thin Film Composite Membrane based on Poly(2,5-benzimidazole) with High Chemical Stability [Volume 31, Issue 6, 2019, Pages 551-561]
-
Peyravi, Majid
Structural Modification of Polymeric PES Membrane by SiO2/ZIF-8 Nanoparticle for Forward Osmosis Process [Volume 34, Issue 1, 2021, Pages 29-41]
-
Peyvand Kermani, Zohreh
Synthesis of Collagen-Based Hydrogel Nanocomposites Using Montmorillonite and Study of Adsorption Behavior of Cd from Aqueous Solutions [Volume 26, Issue 1, 2013, Pages 73-82]
-
Pezeshki-Modaress, Mohamad
Synthesis Methods of In Situ Forming Injectable
Hydrogels and Their Applications in Tissue
Engineering: A Review [Volume 33, Issue 2, 2020, Pages 95-113]
-
Pircheraghi, G.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
-
Pircheraghi, Gholamreza
Rheological Properties of Nanocomposite Aqueous Dispersions Based on Poly(acrylamide-co-acrylic acid) and Carbon Nanotube [Volume 30, Issue 3, 2017, Pages 207-219]
-
Pircheraghi, Gholamreza
Preparation and Characterization of Sintered Microporous Polymeric Filters [Volume 30, Issue 4, 2017, Pages 311-323]
-
Pirouzfar, H.
Etch-Resist Paints for Printed Circuit Boards [Volume 5, Issue 4, 1992]
-
Pishdad, Atefeh
Investigation of Dispersion, Interaction and Superstructure Formation in PTMEG/MWCNT Nanocomposites [Volume 25, Issue 4, 2012, Pages 289-300]
-
Poor, B.Esmaeeli
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization (Part III): Effect of Scale up and Heat Generation Comparison [Volume 17, Issue 3, 2004]
-
Poorabdollah, Mehdi
Dynamic-Mechanical Properties and Thermal
Conductivity of a Polyester Resin Containing
Modified Graphene Oxide Particles [Volume 34, Issue 3, 2021, Pages 281-297]
-
Poorjozi, P.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Poorkhalil, A.
Evaluation of Polymer Concentration Effect on Doxycycline Hyclate Drug Release from in SituForming System based on Poly(lactide-co-glycolide) [Volume 22, Issue 6, 2010, Pages 495-505]
-
Poorkhamene, M.B.Sadeghi
Natural Gas Conversion to Polymer via Ethylene and Ethylene Oxide [Volume 6, Issue 3, 1993]
-
Poorsang, F.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
-
Pour, B.
Soliton, Polaron and Biopolaron in Conducting Polymers [Volume 4, Issue 4, 1991]
-
Pour, S.
Study of the Effect of Acetic Acid and Polyethylene Glycol on Morphology and Performance of Polyvinyl Alcohol Membrane [Volume 16, Issue 1, 2003]
-
Pourabbas, Behzad
Study on the Fouling Behavior of Polyethylene and Silica Nanoparticles Mixed Matrix Membranes in Filtration of Humic Acid Solution [Volume 29, Issue 4, 2016, Pages 347-363]
-
Pourhasan, Bahram
Effect of Nanosilica on Bending Strength and Thermal Stability of Glass Fiber/Phenolic Nanocomposite [Volume 29, Issue 4, 2016, Pages 377-386]
-
Pourhasan, Bahram
Investigation of the Thermal Resistance of Phenolic Resin/Glass Fiber/Nanosilica Nanocomposites [Volume 31, Issue 4, 2018, Pages 359-371]
-
Pourhossaini, Mohamad Reza
Nanocomposite of SBR/Hydroxy-terminated Polybutadiene Grafted- Fumed Silica [Volume 25, Issue 2, 2012, Pages 103-112]
-
Pourhossaini, Mohamad Reza
Polyvinyl Alcohol-Sulfonated Polyethersulfone Blend for Application in Proton-Exchange Membranes [Volume 29, Issue 5, 2017, Pages 405-414]
-
Pourhossaini, Mohammad-reza
Mechanistic Evaluation of Silane-spacer Length on Dynamic and Tribological Behavior of SBR-Modified Silica Rubber Composite [Volume 30, Issue 6, 2018, Pages 489-500]
-
Pourhossaini, Mohammad Reza
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Pourhossaini, Mohammad Reza
Dependence of Dielectric Constant and Mechanical Properties of Expanded Polystyrene Foam on Cell Wall Thickness [Volume 36, Issue 5, 2023, Pages 509-519]
-
Pourhossainy, Mohammad Reza
Effect of Cell Morphology on Energy Absorption of Nitrile Rubber Foam [Volume 33, Issue 6, 2021, Pages 497-507]
-
Pourjavadi, A.
Synthesis of an Epoxy Resin Having Anthracene Moiety: 1,4- Dihydroxytriptycene Instead of Bisphenol A [Volume 10, Issue 1, 1997]
-
Pourjavadi, A.
Preparation of Phosphino(polyacrylic acid) and Study on Its Application as Precipitation Inhibitor [Volume 12, Issue 1, 1999]
-
Pourjavadi, A.
Synthesis of a Triblock Nonionic Copolymer Poly(ricineoleic acid-b-ethyleneglycol-b-ricineoleic acid) and Investigation of
the Stability of Its Associated Water/Oil Emulsion [Volume 21, Issue 6, 2009, Pages 457-464]
-
Pourjavadi, Ali
Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
-
Pourjavadi, Ali
Hydrolysis of Cellulose by Magnetic Poly(ionic liquid) Nanocatalyst Based on Poly(vinylimidazolium sulfonic acid) [Volume 31, Issue 4, 2018, Pages 307-318]
-
Pourjouzi, M.
Important Differences in Some Properties of Gypsumboard Reinforced with Two Types of Natural Fibers (Bagasse and Wood) [Volume 15, Issue 4, 2002]
-
Pourliasi, A.Rahmat
From Living to Immortal Polymerization [Volume 11, Issue 2, 1998]
-
Pourmahdi, Maryam
Synthesis and Characterization of Native Lignin/Acrylamide-Based Copolymers Obtained by Graft Radical Polymerization [Volume 30, Issue 6, 2018, Pages 501-516]
-
Pourmahdian, S.
Initiation of Degradation in Polymers and Preventive Stabilization [Volume 5, Issue 4, 1992]
-
Pourmahdian, S.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
-
Pourmahdian, Saeed
Non-Chemical Routes to Tailor Polymer Polydispersity, Activity and Fragmentation Mechanism of ZN Catalytic Systems in Heterogeneous Propylene Polymerization [Volume 35, Issue 3, 2022, Pages 233-255]
-
Pourmousa, Shademan
Synthesis and Evaluation of Glyoxalated Polyacrylamide (GPAM) as a Wet and Dry-Strengthening Agent of Paper [Volume 27, Issue 2, 2014, Pages 129-121]
-
Pourrashidi, A.
Investigation of the Effect of Electron Beam on Various Polyethylene Blends [Volume 16, Issue 2, 2003]
-
Poursadegh, Hossein
Magnetic Graphene Quantum Dot/Chitosan Bionanocomposite Hydrogel Beads for Drug Delivery System: Synthesis and Application [Volume 36, Issue 4, 2024, Pages 409-420]
-
Poursorkh Abi, V.
Study on the Synthesis and Physical Properties of Polyethylene Imide Derived from HDPE [Volume 21, Issue 1, 2008, Pages 35-44]
Q
-
Qasemifard, Mahmoud
Structure and Crystallinity of Expanded Graphite-Reinforced Carbon Nanocomposite Aerogels and Their Influence on Paraffin Fuel Gases
Filtration Efficiency [Volume 32, Issue 5, 2020, Pages 427-438]
R
-
R., A.
Jute Reinforced Polyester Structures [Volume 2, Issue 2, 1989]
-
R., G.
Identification of Elastomers by Differential Scanning Calorimetry [Volume 4, Issue 4, 1991]
-
R., G.
Elastomeric Insulator for Rockets [Volume 5, Issue 2, 1992]
-
R., G.
The Photo-Oxidative Degradation of EPDM Rubber [Volume 8, Issue 3, 1995]
-
R., G.
Enzyme Biopolishing of Cotton Fabric: Effects of Trichoderma Cellulase on Cotton Fabric Properties [Volume 9, Issue 1, 1996]
-
R., G.
Enzyme Biopolishing of Cotton Fabric: Effects of Neurospora Crassa on Cotton Fabric Properties [Volume 9, Issue 3, 1996]
-
R., G.
Effect of Silica Filler Concentration on Resistance of NBR Vulcanizates in Hot Oil [Volume 10, Issue 2, 1997]
-
R., G.
The Use of Reclaimed Rubber in Rubber Compounds for Optimized Applications [Volume 16, Issue 1, 2003]
-
R., G.
Manufacture and Investigation of Mechanical Properties and Blood Compatibility of Silicone O-Ring Used in Dialyzers [Volume 16, Issue 1, 2003]
-
R., M.
Mathematical and Computational Modeling of Dynamic of Flexible Fibers in Suspension [Volume 12, Issue 2, 1999]
-
R., M.
Quality Evaluation of Chitin and Chitosan Extracted from Cyst Shell of the Artemia Urmiana and its Comparison with Other Type from Shrimp and Crab’s Shell [Volume 16, Issue 2, 2003]
-
R. Pourliassi, A.
A New Conceptulization in Relation to Ionic Polymerization [Volume 10, Issue 2, 1997]
-
R. Rezaie, M.
Combustion Characteristics Studies of Flooring and Polymeric Materials by Cone Calorimetry [Volume 9, Issue 3, 1996]
-
R. Sadradini, M.
Improving Bitumen Properties by Polymeric Materials [Volume 15, Issue 2, 2002]
-
Rabea, A. Mohammad
Staining Behavior of an Anti-Graffiti Polyurethane Clear Coating against Accelerated Weathering Test [Volume 23, Issue 4, 2010, Pages 283-291]
-
Rabiee, Ahmad
Preparation of Acrylamide-based Anionic Polyelectrolytes for Soil Establishment [Volume 24, Issue 4, 2011, Pages 291-300]
-
Rabiee, Ahmad
Preparation and Characterization of Hybrid Nanocomposite of Polyacrylamide/Silica-Nanoparticles [Volume 25, Issue 5, 2013, Pages 405-414]
-
Rabiei, A.
Comparative Thermal and Mechanical Study of Aromatic Tackifying Resins [Volume 13, Issue 1, 2000]
-
Rabiei karahroudi, Narjes
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Rad, Rahy
The Developed Trends in Powder Coatings Technology [Volume 36, Issue 1, 2023, Pages 23-46]
-
Radpour, Maryam
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Rafeezadeh, M.
A New Approach in Multivariable Fuzzy Control of Polymerization Reactors: Fuzzy Trajectory Definition and Tracking [Volume 16, Issue 6, 2004]
-
Rafei, M.
Computer Simulation of Cure Process of an Axisymmetric Rubber Article Reinforced by Metal Plates Using Extended ABAQUS Code [Volume 23, Issue 2, 2010, Pages 121-131]
-
Rafei, Mehdi
A Theoretical and Experimental Investigation of Mechanical Behavior of Steel-Rubber Long Fiber Composites Using Finite Element Method and Analytical Models [Volume 29, Issue 2, 2016, Pages 139-155]
-
Rafi'ee Fanood, M.
Extraction, Fractionation and Molecular Weight Determination of Alginic Acid From Phaeophytas of Persian Gulf [Volume 11, Issue 4, 1998]
-
Rafi'ee Fanood, M.H.
Degradation and Stability of Cellulose Triacetate Cinematograph Films [Volume 7, Issue 1, 1994]
-
Rafi'ee Fanood, M.H.
Unperturbed Molecular Dimensions of Polyacrylamide in Water and in I-Molar Sodium Chloride Solution [Volume 7, Issue 4, 1994]
-
Rafie, Mohammad
Concentration Effect of Mcroencapsulated 1-Methyl Imidazole Curing Agent with Solid Epoxy Shell on Mechanical Properties of Epoxy Resin [Volume 34, Issue 6, 2022, Pages 523-532]
-
Rafiee, Reza
Application of Hydrogels in Adsorptive Removal of Aqueous Pollutants [Volume 31, Issue 6, 2019, Pages 499-518]
-
Rafiee Fanood, M.
Preparation and Characterization of Alginate Impression Materials in Dental Applications [Volume 8, Issue 4, 1995]
-
Rafiei, Monireh
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Rafiei, Negar
Surface Modification of Cation Exchange Membranes Using Chitosan-co-PANI/Graphene Oxide Nanocomposite Layer [Volume 31, Issue 5, 2019, Pages 435-446]
-
Rafiemanzelat, Fatemeh
Synthesis of Self-Colored Nano-Sized Water-Dispersion Polyurethane Coatings with Tunable Particle Size and Color: Anionomer vs. Cationomer [Volume 31, Issue 6, 2019, Pages 519-538]
-
Rafieyan, Faezeh
An Evaluation and Comparison of Mechanical Properties of Phenolic-Glass Fabric Composites Prepared by Vacuum Bag-Only and Autoclave Processes [Volume 36, Issue 3, 2023, Pages 281-294]
-
Rafipoor, Majid
Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
-
Rahbar Shamskar, K.
Tricalcium Phosphate Containing Sodium Hexametaphosphate as Polymer Suspension Stabilizer [Volume 21, Issue 5, 2009, Pages 401-408]
-
Rahbar Shamskar, K.
To Control Bead Size Distribution in Suspension Polymerization [Volume 21, Issue 5, 2009, Pages 409-415]
-
Rahbari, A.H.
Studies on Nano Barium Strontium Titanate/Cellulose Derivatives Composites [Volume 22, Issue 5, 2010, Pages 381-388]
-
Rahbari-Sisakht, Masoud
Surface Modification of PVDF-CTFE Hollow Fiber Membrane with Surface Modifying Macromolecules for Carbon Dioxide Absorption and Stripping [Volume 33, Issue 3, 2020, Pages 213-227]
-
Rahimi, A.
Polycarbonates: Synthetic Methods and Applications [Volume 7, Issue 3, 1994]
-
Rahimi, A.
Preparation and Identification of BPA [Volume 8, Issue 2, 1995]
-
Rahimi, A.
X-Ray and Its Role in O[timization of Functioning Parameters of Polymer Processing [Volume 10, Issue 1, 1997]
-
Rahimi, A.
Preparation and Characterization of Tetrabromobisphenol A [Volume 12, Issue 3, 1999]
-
Rahimi, A.
Preparation and Characterization of Liquid Epoxy Resin DGEBA [Volume 16, Issue 1, 2003]
-
Rahimi, A.
Synthesis of 4,4’-Isopropylidene Diphenol with Cation-exchange Resin
Catalyst Based on Polystyrene-divinyl Benzene [Volume 19, Issue 2, 2006, Pages 143-149]
-
Rahimi, Azam
Surface Modification of Indium Tin Oxide Nanoparticles to Improve Its Distribution in Epoxy-Silica Polymer Matrix [Volume 27, Issue 4, 2014, Pages 289-281]
-
Rahimi, Gholamhossein
Flexural Behavior of Sandwich Structures Consisting of Corrugated Composite Core with Different Geometries [Volume 28, Issue 3, 2015, Pages 187-175]
-
Rahimi, H.
A Theoretical and Experimental Study of the Mould Filling Time in Resin Transfer Moulding Process [Volume 14, Issue 1, 2001]
-
Rahimi, H.
Modelling of the Indentation Behaviour of Thermoplastic Honeycomb Sandwich Panels [Volume 21, Issue 2, 2008, Pages 157-166]
-
Rahimi, H.
Effect of Ethylene Vinyl Acetate on Mechanical Properties of Glass Mat Reinforced Polypropylene Composites [Volume 18, Issue 5, 2006, Pages 303-310]
-
Rahimi, M.K.
Concurrent Antimicrobial and Anticrease of Bleached and Cationic Cotton Using Nano Titanium Dioxide and Butane Tetracarboxylic Acid [Volume 22, Issue 1, 2009, Pages 41-51]
-
Rahimi, Mohmmad Karim
Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
-
Rahimi, Saman
Study of Nonlinear Properties of Poly(m-phenylene diamine)@BaTiO3 Nanocomposite for Laser Application [Volume 34, Issue 6, 2022, Pages 533-546]
-
Rahimi Bandarabadi, Saaid
Compatibility, Morphology, Mechanical Properties and Biodegradability of Poly(styrene-ethylene-propylenestyrene)/ Modified Thermoplastic Starch Blends [Volume 29, Issue 4, 2016, Pages 311-321]
-
Rahimi Tanha, Nadia
Core/Shell Nanofibers of Silk Fibroin/Polyvinyl Alcohol: Structure and Controlled Release Behavior [Volume 30, Issue 6, 2018, Pages 473-488]
-
Rahimian, R.
Synthesis, Characterization and Drug Release Study of Vinylic Monomer of Acetaminophen [Volume 7, Issue 2, 1994]
-
Rahmani, Farhad
Synthesis of TiO2 Composite Nanofibers Doped with
Copper Oxide Nanoparticles through Electrospinning and Their Application in Photocatalytic Degradation of Pharmaceutical Wastewaters [Volume 33, Issue 6, 2021, Pages 465-478]
-
Rahmani, Rahmat Allah
Flexural Behavior of Sandwich Structures Consisting of Corrugated Composite Core with Different Geometries [Volume 28, Issue 3, 2015, Pages 187-175]
-
Rahmatinejad, Jalal
Nanoscale Roughness on the Surface of Polyester Fibers Through Ultraviolet/Ozone Treatment [Volume 32, Issue 6, 2020, Pages 457-473]
-
Rahmatpour, A.
Studies on the Rheological Behavior of Compatibilized HIPS/HDPE Blends [Volume 17, Issue 1, 2004]
-
Rahmatpour Liassi, A.
Living Polymeric Systems: Design and Applications [Volume 8, Issue 1, 1995]
-
Rajabi, F.Hosseinpour
Investigations on Effect of Heat and Humidity on Polyurea and Gelatin Microcapsules [Volume 14, Issue 3, 2001]
-
Rajabi, Laleh
Dynamic-Mechanical Properties and Thermal
Conductivity of a Polyester Resin Containing
Modified Graphene Oxide Particles [Volume 34, Issue 3, 2021, Pages 281-297]
-
Rajabi, Samaneh
Effect of Organoclay on Photo-oxidation of Mulching Films Based on Low Density Polyethylene (LDPE)/ Ethylene-Vinyl Acetate (EVA) Containing Ca- stearate as a Pro-oxidant [Volume 29, Issue 1, 2016, Pages 45-54]
-
Rajabi, Yaser
Study of Nonlinear Properties of Poly(m-phenylene diamine)@BaTiO3 Nanocomposite for Laser Application [Volume 34, Issue 6, 2022, Pages 533-546]
-
Rajabi, Zeinab
CO2/N2 Gas Separation Using Nanocomposite Membranes Comprised of Ethylene-Propylene-Diene Monomer/Multi-Walled Carbon Nanotube (EPDM/MWCNT) [Volume 28, Issue 3, 2015, Pages 224-211]
-
Rajabi Dehaki, H.
An Investigation of the Crimp Effect on the Cotton Cloth [Volume 14, Issue 2, 2001]
-
Rajabzadeh, Hojjat
Optimization of Tensile Strength of Phenolic-Glass Compound for Compression Molding Process [Volume 28, Issue 1, 2015, Pages 26-19]
-
Ramazani, A.
Synthesis of Epoxy-Novalac Resin and Determination of its Physical and Mechanical properties [Volume 7, Issue 3, 1994]
-
Ramazani, A.
Investigation on a Rheological Model for Miscible Polymer Blends and Its Evaluation with Experimental Data [Volume 14, Issue 6, 2002]
-
Ramazani, A.
Optimization of Cost-properties in Production of a General Purpose Conveyer Belt Using Taguchi Method with Overall Evaluation Criteria Method [Volume 18, Issue 3, 2005, Pages 135-142]
-
Ramazani, Ali
Cellulose Modification Through Grafting of Polyacrylonitrile by Atom Transfer Radical Polymerization [Volume 28, Issue 4, 2015, Pages 332-323]
-
Ramazani, Ali
Biobased Acids in Production of Hybrid Superabsorbent Polymer Hydrogels: A Review [Volume 34, Issue 3, 2021, Pages 207-231]
-
Ramazani Saadat Abadi1, Ahmad
A Poly(vinyl acetate)/Colloidal SiO2 Nanocomposite Synthesized by Emulsion Polymerization and Study of Its Mechanical, Thermal and Rheological Properties [Volume 30, Issue 2, 2017, Pages 151-161]
-
Ramezani, S.
Study of the Effect of Heat Treatment on Nylon 66 Tire Cords Structure and its Physical Properties [Volume 20, Issue 2, 2007, Pages 109-117]
-
Ramezani Dakhel, H.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Ramezanian, Navid
Effect of Polysulfone and Graphene Nanosheets on the Flexibility of Epoxy Coatings [Volume 30, Issue 2, 2017, Pages 105-114]
-
Ramzani Saadat Abadi, A.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Ramzanian, Navid
Poly(styrene-alt-maleic anhydride) Conjugated with Spermine: Synthesis, Antibacterial Activity and Antibiotic Susceptibility [Volume 31, Issue 1, 2018, Pages 15-26]
-
Ranjbar, Aazam
Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
-
Ranjbar, Heidar
Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator
Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
-
Ranjbar, M.
Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
-
Ranjbar-Mohammadi, Marziyeh
Fabrication of Nanofibrous Hybrid Scaffolds from Polylactic Acid-Graphene and Gelatin for Application in Bone Tissue Engineering [Volume 31, Issue 6, 2019, Pages 563-574]
-
Ranjbar-Mohammadi, Marziyeh
Fibrous Structures Fabricated from
Polylactic Acid and Nanofibrillated Chitosan/
Zinc Oxide Nanoparticles [Volume 34, Issue 2, 2021, Pages 173-190]
-
Ranjbar-Mohammadi, Marziyeh
Gelatin/Polycaprolactone and Polyvinyl Alcohol/Chitosan Hybrid Nanofibers: Determining Factors on Their Morphology [Volume 35, Issue 3, 2022, Pages 201-214]
-
Raof, J.
Electrochemical Behavior of Electroactive/Conductive Poly(α-naphthylamine) in Aqueous Media [Volume 5, Issue 2, 1992]
-
Raoof, J.
Polymeric and Nonpolymeric Modified Electrodes [Volume 7, Issue 1, 1994]
-
Raouf Dehkordi, M.
Compatibility Study of PP/PET Blend Fibers by PP-g-MA Compatibilizer [Volume 15, Issue 2, 2002]
-
Rasaee, M.J.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Rashedi, Reza
Correlation between Microstructure and Rheological Properties of Broad Molecular Weight Distribution High Density Polyethylenes [Volume 28, Issue 1, 2015, Pages 38-27]
-
Rashidi, Abosaeed
Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
-
Rashidi, Abu Saeed
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Rashidi, B.
Study on Shape Memory of Poly(vinyl chloride)/Thermoplastic Polyester Urethane Blends [Volume 20, Issue 2, 2007, Pages 125-132]
-
Rasoulzadeh, Y.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Rastgoo, Mehdi
Preparation and Investigation of Mechanical Properties and Optical Clarity of Polyvinylbutyral Film [Volume 22, Issue 2, 2009, Pages 125-131]
-
Ravari, F.
Crystallization Behavior of Poly(l-lactide) Films in Presence of Mg(OH)2 and l-Lactide [Volume 23, Issue 5, 2011, Pages 405-413]
-
Ravati, S.
Study of Rheological Properties of Rubber/Carbon Black Compounds
During Incorporation Stage in Internal Mixers [Volume 18, Issue 3, 2005, Pages 159-169]
-
Raveshiyan, Saba
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
-
Razaghi Kashani, Mehdi
The Effect of Graphite Nanoparticles on Thermal Stability and Ablation of Phenolic/Carbon Fiber/Graphite Nanocomposites [Volume 27, Issue 3, 2014, Pages 249-241]
-
Razaghian, Farhad
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Razavi, Bahareh
Effect of Polysulfone and Graphene Nanosheets on the Flexibility of Epoxy Coatings [Volume 30, Issue 2, 2017, Pages 105-114]
-
Razavi, J.
Synthesis of PVC Organosol Lacquers for Internal Metal Can Coatings [Volume 12, Issue 2, 1999]
-
Razavi, Morteza
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Razavi, Seyyed Reza
Synthesis of Chromium-Based Catalysts and Study of Various Solvents on the Morphology and Structural
Parameters of the Catalysts in Ethylene Polymerization [Volume 34, Issue 3, 2021, Pages 233-247]
-
Razavi-Nouri, M.
Effect of Single-walled Carbon Nanotubes on Non-isothermal Crystallization Kinetics of Polypropylene: Comparison of
Ozawa and Cazé-Chuah Methods [Volume 22, Issue 1, 2009, Pages 53-61]
-
Razavi-Nouri, M.
3-Dimensional Modeling of Flow of Polymeric Fluids with Various Viscosities in an Extrusion Die Using Mixed
Method and Tetrahedral Elements [Volume 21, Issue 2, 2008, Pages 167-179]
-
Razavi-Nouri, Mohammad
Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
-
Razavi-Nouri, Mohammad
Optimization of Processing Parameters in 3D-Printing of Poly(lactic acid) by Fused Deposition Modeling Method [Volume 30, Issue 2, 2017, Pages 115-126]
-
Razavi-Nouri, Mohammad
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Razavi Aghjeh, Mirkarim
Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA) and Nanoclay [Volume 28, Issue 4, 2015, Pages 299-289]
-
Razavi Nouri, M.
Polymer Impregnated Concrete: A Review [Volume 11, Issue 1, 1998]
-
Razavi Nouri, M.
Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]
-
Razavi Nouri, M.
Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
-
Razavizade, Mohamoud
Dependence of Dielectric Constant and Mechanical Properties of Expanded Polystyrene Foam on Cell Wall Thickness [Volume 36, Issue 5, 2023, Pages 509-519]
-
Razavizadeh, Mohamoud
Effect of Cell Morphology on Energy Absorption of Nitrile Rubber Foam [Volume 33, Issue 6, 2021, Pages 497-507]
-
Razmjoo, Faezeh
Mechanical and Morphological Properties of Short Nylon Fibers and Carbon Nanotubes Reinforced NR/SBR Nanocomposites [Volume 31, Issue 4, 2018, Pages 345-357]
-
Razzaghi-Kashani, Mehdi
Simulation of Rubber Friction Using Viscoelastic Behavior of Rubber and Roughness Parameters of Surfaces [Volume 26, Issue 2, 2013, Pages 149-158]
-
Razzaghi-Kashani, Mehdi
Mechanism of Improvement in Tribological Properties of Polyamide 6 by Addition of Irradiated Polytetrafluoroethylene Powder [Volume 27, Issue 6, 2015, Pages 412-403]
-
Razzaghi-Kashani, Mehdi
The Effect of Novolac and Graphite Polycrystal on the Acetone Penetration and Thermal Resistance of Nanocomposites Based on Nitrile Rubber [Volume 28, Issue 1, 2015, Pages 82-73]
-
Razzaghi-Kashani, Mehdi
Mechanistic Evaluation of Silane-spacer Length on Dynamic and Tribological Behavior of SBR-Modified Silica Rubber Composite [Volume 30, Issue 6, 2018, Pages 489-500]
-
Razzaghi-Kashani, Mehdi
On the Mechanism of Physical Effects of Reinforcing Fillers in the Vulcanization Kinetics of Styrene-Butadiene-Rubber [Volume 31, Issue 5, 2019, Pages 447-460]
-
Razzaghi-Kashani, Mehdi
Effect of Irradiated Poly(tetrafluoroethylene)
Additive on Mechanical and Tribological Properties in Nitrile Rubber Composites [Volume 32, Issue 4, 2019, Pages 339-348]
-
Razzaghi-Kashani, Mehdi
Evaluation of Fatigue Crack Growh Resistance of
Rubber-Silica Composites and Analysis of the Role of Filler-Filler Interaction and Interface Bonding [Volume 32, Issue 5, 2020, Pages 397-409]
-
Razzaghi Kashani, M.
Polymerization of Phenol Formaldehyde in Solvent-Saturated Vapor and Study on the Microstructure and Mechanical Properties of Novolac Aerogel Product [Volume 26, Issue 5, 2014, Pages 435-427]
-
Razzaghi Kashani, Mehdi
Nanocomposite of SBR/Hydroxy-terminated Polybutadiene Grafted- Fumed Silica [Volume 25, Issue 2, 2012, Pages 103-112]
-
Razzaghi Kashani, Mehdi
Design, Construction, and Evaluation of Rubber Friction Tester [Volume 24, Issue 2, 2011, Pages 153-164]
-
Razzaghi Kashani, Mehdi
Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
-
Razzaghi Kashani, Mehdi
Biological Reclaiming of Recycled Rubber and Its Effect on Mechanical Properties of New Rubber Vulcanizates [Volume 27, Issue 5, 2014, Pages 407-395]
-
Redaei, Alireza
Barium Ferrite-containing Polymer Composite Magnets: Magnetic and Mechanical Properties [Volume 34, Issue 2, 2021, Pages 143-154]
-
Reghat, Mojdeh
Shear-Induced Crystallization of Poly(lactic acid)/Graphene Nanocomposite [Volume 29, Issue 5, 2017, Pages 415-427]
-
Rekabdar, F.
Morphology Control in Cellulose Acetate Membrane [Volume 11, Issue 4, 1998]
-
Rekabdar, F.
Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
-
Rekabdar, Fatemeh
Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator
Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
-
Resalati, H.
Application of Galbanum Gum Polysaccharide as a Natural Polymer to Improve Dry Strength Properties of Recycled Papers Obtained from Old Corrugated Cartons [Volume 23, Issue 4, 2010, Pages 345-353]
-
Resalati, H.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Reza Bahramian, Ahmad
Non-Parametric Kinetic (NPK) Analysis of Thermal Oxidation of Carbon Aerogels [Volume 30, Issue 2, 2017, Pages 163-176]
-
Rezadoost, A.M.
Investigation of the Effect of Internal Mold Release Agent and Filler on the Pulling Force in Pultrusion Process [Volume 20, Issue 3, 2007, Pages 271-279]
-
Rezadoust, A.M.
Investigation of Factors ِِِAffecting the Surface Quality of Pultruded Profiles [Volume 15, Issue 4, 2002]
-
Rezadoust, A.M.
Study of the Thickening Behavior and the Mechanical Properties of Sheet Molding Compound Prepared by Alkaline, Isocyanate and Dual Thickening Methods [Volume 16, Issue 6, 2004]
-
Rezadoust, A.M.
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Rezadoust, A.M.
Improvement in Char Formability of Phenolic Resin for Development of Carbon/Carbon Composites [Volume 21, Issue 2, 2008, Pages 127-132]
-
Rezadoust, A.M.
Study of Room Temperature Curing of Phenolic Resin and Its Silica Reinforced Composites [Volume 21, Issue 2, 2008, Pages 149-155]
-
Rezadoust, A.M.
Modelling of the Indentation Behaviour of Thermoplastic Honeycomb Sandwich Panels [Volume 21, Issue 2, 2008, Pages 157-166]
-
Rezadoust, Amir Masood
Optimization of Tensile Strength of Phenolic-Glass Compound for Compression Molding Process [Volume 28, Issue 1, 2015, Pages 26-19]
-
Rezadoust, Amir Masood
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Rezadoust, Amir Masood
An Evaluation and Comparison of Mechanical Properties of Phenolic-Glass Fabric Composites Prepared by Vacuum Bag-Only and Autoclave Processes [Volume 36, Issue 3, 2023, Pages 281-294]
-
Rezadoust, Amir Masoud
Effect of Through-the-Thickness Yarn Fineness and Distanceon Damage Behavior of Carbon-Phenolic 3D Composites [Volume 27, Issue 5, 2014, Pages 448-441]
-
Rezadoust, Amir Masoud
Optimization of Processing Parameters in 3D-Printing of Poly(lactic acid) by Fused Deposition Modeling Method [Volume 30, Issue 2, 2017, Pages 115-126]
-
Rezaee, M.
Preparation and Investigation of Physical and Mechanical Properties of Biocompatible Blend Based on PDMS/PHEMA [Volume 11, Issue 3, 1998]
-
Rezaee Alam, D.
Study on Physical and Mechanical Properties, Thermal Behaviour and Morphology of Polyacetal and Polyurethane Thermoplastic Elastomer Blends [Volume 13, Issue 3, 2000]
-
Rezaee cherani, P.
Use of Central Composite Design in Cellulosic Industrial Research: Dimethyl Formamide Pulping of Bagasse [Volume 18, Issue 6, 2006, Pages 345-358]
-
Rezaee Shirin-Abadi, Abbas
Preparation of Melamine - Formaldehyde Microcapsules Containing Hexadecane as a Phase Change Material: The Effect of Surfactants Type and Concentration [Volume 26, Issue 1, 2013, Pages 33-44]
-
Rezaee Shirin-Abadi, Abbas
A Comparative Study of CO2-Responsive Worm-like Micelles Prepared by Macromolecules and Small Molecules [Volume 31, Issue 3, 2018, Pages 265-274]
-
Rezaei, M.
Dewatering of Yoghurt Using Permeable Membrane and Acrylic Superabsorbent Hydrogel [Volume 20, Issue 6, 2008, Pages 551-559]
-
Rezaei, Mostafa
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Rezaei, Mostafa
Effect of Glycerol in Soft and Hard Segments on Properties of Shape Memory Polyurethane [Volume 36, Issue 2, 2023, Pages 191-203]
-
Rezaei, Nima
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Rezaei Haghighat, Hasan
Study on Ablation Behavior of Phenolic Composites Prepared with Different Amounts of Zirconia and Asbestos Fiber [Volume 25, Issue 3, 2012, Pages 181-191]
-
Rezaeian, I.
The Use of Polymer Lining and Reinforced Plastics (FRP) Against Corrosion in Chemical Industry (part I) [Volume 3, Issue 1, 1990]
-
Rezaeian, I.
The Use of Polymer Lining and Reinforced Plastics (FRP) Against Corrosion in Chemical Industry (Part II) [Volume 3, Issue 2, 1990]
-
Rezaiean, I.
Modified Lignosulfonate as a Concrete Superplasticizer [Volume 8, Issue 3, 1995]
-
Rezakhani Roozbehani, Shokofeh
Optimization of Effective Parameters in Fabrication of PVC Flat Sheet Membranes by Response Surface Method for Application in Humic Acid Separation [Volume 36, Issue 4, 2024, Pages 421-435]
-
Rezanejade Bardajee, Ghasem
Synthesis and Characterization of Iron Magnetic Nanocomposite Hydrogel Based on Modified
Sodium Carboxymethyl Cellulose Using Acrylamide and Acrylic Acid and Investigation of Drug Delivery Properties [Volume 29, Issue 3, 2016, Pages 265-275]
-
Rezayi Mokarram, R.
Gamma Oryzanol Bearing Nanoliposome Produced by Modified Thermal Method: Thermal Property,
Encapsulation Efficiency, Oscillatory Rheometry [Volume 26, Issue 5, 2014, Pages 425-413]
-
Rezvani, M.H.
Improved Laser Induced Birefringence in Highly Doped Optical Polymers [Volume 21, Issue 4, 2008, Pages 179-284]
-
Rezvani, M.H.
Investigation of Contact Poling Process in Thin Films of Polymer Doped with Disperse Red 1 Dye [Volume 20, Issue 5, 2008, Pages 449-455]
-
Rezvani, Sina
Preparation and Characterization of a Polymer Concrete and Estimation of Compressive Strength Using a Two-Phase Micromechanical Model [Volume 28, Issue 2, 2015, Pages 120-111]
-
Riahi samani, M.
Chromium Removal from Chromium-plating Industry Waste Water Using
Conductive Polymers [Volume 19, Issue 2, 2006, Pages 137-141]
-
Rikhtegar, Hamed
Epoxy-Based Composite Adhesive Containing Silver Coated Copper Powder: Preparation and Evaluation of Its Electrical Properties [Volume 30, Issue 1, 2017, Pages 53-61]
-
Roghani-Mamaqani, H.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Roghani-Mamaqani, H.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Roghani-Mamaqani, H.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Roghani-Mamaqani, H.
Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
-
Roghani-Mamaqani, hossein
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Roghani-Mamaqani, Hossein
Atom Transfer Radical Polymerization of Styrene in Presence of Mesoporous Silica Nanoparticles: Application of Reverse, Simultaneous Reverse and Normal Initiation Techniques [Volume 27, Issue 1, 2014, Pages 90-79]
-
Roghani-Mamaqani, Hossein
Synthesis of Polystyrene/MCM–41 Nanocomposites through AGET ATRP and ARGET ATRP [Volume 28, Issue 3, 2015, Pages 255-243]
-
Roghani-Mamaqani, Hossein
Grafting of Polystyrene Chains at the Edge of Graphene Nanolayers by "Grafting Through" Approach Using Reversible Addition-Fragmentation Chain Transfer Polymerization [Volume 30, Issue 4, 2017, Pages 351-363]
-
Roghani-Mamaqani, Hossein
Preparation of Thermally-Resistant Nanohybrids Based on Novolac and Epoxy Resins and Epoxidized Carbon Nanotubes [Volume 31, Issue 4, 2018, Pages 373-383]
-
Roghani-Mamaqani, Hossein
Polystyrene Chains with Different Grafting Densities on the Surface of Graphene Oxide by "Grafting Through” Method [Volume 33, Issue 3, 2020, Pages 255-270]
-
Roshandeh, J.Mohammadi
Preparation of Alpha Cellulose from Poplar Sawdust [Volume 17, Issue 3, 2004]
-
Rostami, A.
Evaluation of Kinetics and Activation Parameters of Electrochemical Polymerization of Ortho-Aminophenol [Volume 13, Issue 1, 2000]
-
Rostami, A.A.
Influence of Stabilizers on the Electroactivity and Morphology of Polypyrrole Film [Volume 10, Issue 3, 1997]
-
Rostami, Amir
A New Modified Emulsion Model for Immiscible
Binary Polymeric Blends Containing Nanoparticles Distributed in Droplets [Volume 34, Issue 1, 2021, Pages 81-92]
-
Rostami, M.R.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, I: Effect of Pressure [Volume 16, Issue 3, 2003]
-
Rostami, M.R.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, II: Effect of Buffer and Emulsifier Concentration [Volume 16, Issue 4, 2003]
-
Rostami, Mohamad Taghi
The Effect of non-Newtonian Behavior of Fluid on the Tubular Reactor Performance and Studying Different Variables in Relation to the Degree of Conversion [Volume 27, Issue 6, 2015, Pages 436-423]
-
Rostami, S.
Crystallization Behavior of a Semi-Crystalline Miscible Blend [Volume 5, Issue 3, 1992]
-
Rostami Daronkola, M.R.
Structure/Glass Transition Temperature Relationship of PVAc-b-poly(MA-co-MMA) Terpolymers with Theoretical and Topological Methods [Volume 23, Issue 2, 2010, Pages 133-144]
-
Rostami Daronkola, M.R.
Thermal Property and Microstructures of Poly(VAc-b-MA) and PVAc-b-Poly(MA-co-MMA) Block Copolymers and
Terpolymers [Volume 22, Issue 3, 2009, Pages 197-207]
-
Rostami Daronkola, Mohamad Reza
Kinetic Study of Atom Transfer Radical Polymerization of Methyl Acrylate with Polyvinyl Acetate Macroinitiator [Volume 24, Issue 3, 2011, Pages 181-193]
-
Rostami Daronkola, Mohammad Reza
Synthesis and Characterization of Quaternary Polymers as Superplasticizer and Assessing Their Effectiveness on Micronized Cement Particles [Volume 30, Issue 3, 2017, Pages 221-233]
-
Rostami Daronkola, Mohammad Reza
Superabsorbent Microparticles for Production of Concrete Using Ultrasound: A Performance Study [Volume 36, Issue 1, 2023, Pages 61-72]
-
Rostami Daroonkola, M.R.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
-
Rostami Darounkola, Mohammad Reza
Synthesis of Branched Polymers and Dispersion of Nanosilica and the Effect of Their Interaction on Hydrated Cement Morphology [Volume 31, Issue 3, 2018, Pages 239-250]
-
Rostami Darounkola, Mohammad Reza
Synthesis and Functionalization of α-Olefines (6 and 10 Carbons)/Maleic Anhydride Comb-like Copolymers and Their Application in Silica Nanohybrid and Hydrogel [Volume 33, Issue 6, 2021, Pages 537-551]
-
Rostamloo, Mahsa
Effect of Nanoclay on the Electrospinning of Poly(ε-caprolactone) [Volume 24, Issue 3, 2011, Pages 231-240]
-
Roughani Mamaghani, H.
Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
-
Rowshanzamir, S.
The Role of Reaction Parameter on Leaching of SiO2 Doped Nafion Membrane for Use in High Temperature PEM Fuel Cells [Volume 23, Issue 2, 2010, Pages 111-120]
-
Rozrokh, Kamil
Optimization and Enhancement of PAN Ultrafiltration Membrane for Separation of Lignin from Waste Water of Paper Mill Using Response Surface Methodology [Volume 32, Issue 3, 2019, Pages 239-254]
-
Rychly, J.
Chemiluminescence of Polyamides: 2-Mechanism and Kinetics of Oxidation [Volume 8, Issue 1, 1995]
S
-
S. Madaeni, S.
Preparation of Conductive Membranes Using Polypyrrole [Volume 15, Issue 6, 2003]
-
S. Zarin, A.
Combustion Characteristics Studies of Flooring and Polymeric Materials by Cone Calorimetry [Volume 9, Issue 3, 1996]
-
S.A, Ghasempour
Effect of Aging on Mechanical Properties of EpoxyJR-Glass Composites [Volume 7, Issue 4, 1994]
-
S.A., Hassanzadeh-Tabrizi
Fabrication of CoCr2O4 nanoparticles using polyacrylamide gel polymer template [Volume 35, Issue 6, 2023, Pages 519-527]
-
S.A., Hassanzadeh-Tabrizi
A review on biopolymers for the application of new hemostatic materials in medicine [(Articles in Press)]
-
S.A. Hashemi,
Silane Coupling Agents Effects on Reinforced Phenolic Molding Compounds [Volume 7, Issue 2, 1994]
-
Saadat-Monfared, Arash
A Study of UV Resistance of a Water-based Polyurethane Lacquer Containing Nano Ceria [Volume 23, Issue 6, 2011, Pages 441-454]
-
Saadat Joo, N.
Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes
during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
-
Saadat Tagharoodi, Milad
Effect of Cell Morphology on Energy Absorption of Nitrile Rubber Foam [Volume 33, Issue 6, 2021, Pages 497-507]
-
Saadat Tagharoodi, Milad
Dependence of Dielectric Constant and Mechanical Properties of Expanded Polystyrene Foam on Cell Wall Thickness [Volume 36, Issue 5, 2023, Pages 509-519]
-
Saadatabadi, A.Ramezani
Investigation of Conformational Rheological Models for Polymer Melts and Concentrated Solutions [Volume 17, Issue 2, 2004]
-
Sabbaghi, H.
Application of Composites in Aerospace Industry [Volume 2, Issue 3, 1989]
-
Sabbaghi, H.
The Presence of Defects in Composites [Volume 3, Issue 2, 1990]
-
Sabet, S.A.R.
Investigation of Factors ِِِAffecting the Surface Quality of Pultruded Profiles [Volume 15, Issue 4, 2002]
-
Sabetzadeh, M.
Nanoclay Effect on the Flow and Thermal Properties of PP/SEBS-g-MA Blend [Volume 26, Issue 5, 2014, Pages 412-403]
-
Sabetzadeh, Maryam
Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
-
Sabzali Naseri, M.A.
Study of Synchronous Effect of PP-g-MA and MDBS Additives on Crystallization Temperature and Transparency of PP by Taguchi Method [Volume 19, Issue 1, 2006, Pages 13-21]
-
Sabzevari, Alireza
Conversion of Lignocellulosic Bagasse Biomass into Hydrogel [Volume 29, Issue 5, 2017, Pages 455-467]
-
Sabzi, Mohammad
Mechanical and Shape Memory Properties of Poly(vinyl acetate)/Poly(lactic acid) Blends [Volume 31, Issue 1, 2018, Pages 57-68]
-
Sabzikar Boroujerdy1, Mostafa
Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
-
Sadat-Shojai, Mehdi
Biodegradable Aliphatic Polyesters for Application in Tissue Engineering [Volume 34, Issue 4, 2021, Pages 319-348]
-
Sadat Hoseini, Zahra
A Highly Toughened Poly(lactic acid)/Ethylene-co-Vinyl Acetate Blend with the Simultaneous Addition of Hydrophobic Nanoparticles and Compatibilizer [Volume 33, Issue 6, 2021, Pages 509-524]
-
Sadati, M.
Synthesis of High Isotactic and High Melt Flow Polypropylene in Liquid
Propylene [Volume 20, Issue 3, 2007, Pages 221-226]
-
Sadatnia, B.
Synthesis and Study of Poly(HEMA-co-NVP) Hydrogels for Contact Lens Applications [Volume 12, Issue 1, 1999]
-
Sadatnia, B.
Evaluation of Effective Parameters on Cold Duration in Cryoaccumulator Gels [Volume 15, Issue 6, 2003]
-
Sadatzadeh, Sahar
Reinforcement of Bolted Timber Joints Using GFRP Sheets in Poplar and Pine Woods [Volume 24, Issue 3, 2011, Pages 171-179]
-
Sadeghi, Arash
Effect of Thermally-Reduced Graphene Nanoparticles on the Electromagnetic Interference Shielding Performance, Rheological Behavior and Thermal Stability of PP/PET Blend [Volume 31, Issue 4, 2018, Pages 319-330]
-
Sadeghi, Behzad
Potassium Permanganate Solution-containing Polyethylene Nanocomposite Film Used as Color Indicator in Smart Packaging [Volume 30, Issue 3, 2017, Pages 183-196]
-
Sadeghi, M.
Effect of Difunctional Monomers on the Wear Resistance of Acrylic Teeth [Volume 13, Issue 3, 2000]
-
Sadeghi, Mohsen
Preparation and Optimization of Labeled Chitosan Nanoparticles and Evaluation of their Release from Transdermal Drug Delivery System [Volume 28, Issue 4, 2015, Pages 344-333]
-
Sadeghi, Saeb
Syntheses and Rheological Properties of Poly(nonadecanamide-co-ethylene glycol) Thickener [Volume 25, Issue 6, 2013, Pages 459-466]
-
Sadeghi Ghari, Hedayatollah
Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
-
Sadeghi Ghari, Hedayatollah
Physical Chemistry and Rheological Behavior of Commercial Polymers of Viscosity Index Improver Used in Motor Oil Industry [Volume 24, Issue 3, 2011, Pages 215-230]
-
Sadeghian Maryan, A.
Comparison of Different Methods of Denim Stone Washing by Pumice Stone, Acid Cellulases and Neutral Cellulases [Volume 20, Issue 4, 2007, Pages 369-380]
-
Sadeghieh, Khatereh
Electrospinning of Silk Fibroin/Β-Cyclodextrin Nanofibers for Controlled Drug Release [Volume 29, Issue 1, 2016, Pages 89-100]
-
Sadeghnejad, Soroush
Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core [Volume 29, Issue 1, 2016, Pages 55-72]
-
Sadi, M.
The Effect of a Number of Selective Points in Modelling of Polymerization Reaction by Monte Carlo Method: Studying the Initiation Reaction [Volume 15, Issue 5, 2003]
-
Sadighi, M.
Development of Braiding-Pultrusion Method and Investigation of Mechanical Properties of Composite Rods Produced by this Method [Volume 22, Issue 2, 2009, Pages 141-149]
-
Sadighi, M.
An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]
-
Sadighi, M.
An Experimental Study on Impact Behavior of Fiber/Metal Laminates [Volume 21, Issue 4, 2008, Pages 315-327]
-
Sadighi, Mojtaba
Bending Properties of Sandwich Beams with Fiber Metal Laminate Face Sheet [Volume 25, Issue 5, 2013, Pages 375-382]
-
Sadighi, Mojtaba
Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core [Volume 29, Issue 1, 2016, Pages 55-72]
-
Sadighi, Mojtaba
Analytical/Empirical Study on Indentation Behavior of Sandwich Plate with Foam Core and Composite Face Sheets [Volume 30, Issue 3, 2017, Pages 235-245]
-
Sadjadi, Samahe
Synthesis and Formulation of Photocurable Resins Possessing Polyethylene Glycol and POSS, and Preparation of Their Related Nanocomposites [Volume 33, Issue 5, 2021, Pages 445-458]
-
Sadrejahani, Mehdi
Microstructural Characterization of Aligned PAN Nanofibers Collected by Hot Air Flow in Electrospinning Method [Volume 23, Issue 4, 2010, Pages 271-281]
-
Saeidi, M.
Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
-
Saeidi, M.
Tricalcium Phosphate Containing Sodium Hexametaphosphate as Polymer Suspension Stabilizer [Volume 21, Issue 5, 2009, Pages 401-408]
-
Saeidi, M.
To Control Bead Size Distribution in Suspension Polymerization [Volume 21, Issue 5, 2009, Pages 409-415]
-
Saeifzadeh, Negin
Effect of Ultrasound on Physicochemical Properties of Wheat Starch [Volume 27, Issue 1, 2014, Pages 23-15]
-
Safaei Javan, Raheleh
Dynamic Parameters in Preparing Chitosan Nanoparticles with Incorporation Method Using Novel Drug Delivery Systems [Volume 23, Issue 2, 2010, Pages 103-110]
-
Safarabadi, Majid
Influence of Physical, Thermal and Mechanical Parameters on Micro Residual Stresses in Polymeric Composites [Volume 24, Issue 5, 2012, Pages 355-368]
-
Safari Dinachali, S.
Residual Stresses in Thermoplastic Composites: A Review [Volume 21, Issue 6, 2009, Pages 477-493]
-
Safi, Mahdi
PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
-
Safi, S.
The Study on Electrospinning of Nanofibers from Sodium Alginate and the Effects of Different Co-solvents
on Electrospinning of Polymer Solution [Volume 20, Issue 5, 2008, Pages 437-447]
-
Safi, Somayeh
Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
-
Saghafi, Reza
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Saghandali, Farzin
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Sahbai, Z.
Study of Ultraviolet (UV) Effect on Stabilization of Polyurethane Against Bacterial Deterioration [Volume 12, Issue 3, 1999]
-
Sahbai, Z.
Study on Inhibition of Biological Deterioration of a Type of Polyurethane Binder by Using Some Chemical Agents [Volume 15, Issue 3, 2002]
-
Sahebian, S.
The Effect of Temperature and Nano-sized Calcium Carbonate on Tensile Properties of Medium Density
Polyethylene [Volume 21, Issue 2, 2008, Pages 133-140]
-
Sajedi Fard, Z.G.B.
Studies on the Doping of Polyaniline with Organic Acids by UV-Vis Spectroscopy [Volume 17, Issue 1, 2004]
-
Sajjadi, N.
Polycarbonates: Synthetic Methods and Applications [Volume 7, Issue 3, 1994]
-
Sajjadi, S.
Energy and Petrochemicls, an Unbreakable Bond [Volume 3, Issue 4, 1990]
-
Sajjadi, S.
Mixing in Polymerization Processes (I) [Volume 5, Issue 1, 1992]
-
Sajjadi, S.A.
The Role of Multi-wall Carbon Nanotubes on Fracture Mechanism of Epoxy Nanocomposite [Volume 21, Issue 5, 2009, Pages 417-430]
-
Sajjadi, S.A.
The Effect of Temperature and Nano-sized Calcium Carbonate on Tensile Properties of Medium Density
Polyethylene [Volume 21, Issue 2, 2008, Pages 133-140]
-
Sakhavi, Mahdi
Effect of Glycerol in Soft and Hard Segments on Properties of Shape Memory Polyurethane [Volume 36, Issue 2, 2023, Pages 191-203]
-
Salabat, A.
Application of Aqueous Polymer Systems in Biotechnology [Volume 7, Issue 4, 1994]
-
Salahshour Kordestani, S.
Enzyme Biopolishing of Cotton Fabric: Effects of Trichoderma Cellulase on Cotton Fabric Properties [Volume 9, Issue 1, 1996]
-
Salahshour Kordestani, S.
A Review on the Application of Biotechnology in Textile: The Role of Enzymes [Volume 12, Issue 1, 1999]
-
Salahshour Kordestani4, S.
Enzyme Biopolishing of Cotton Fabric: Effects of Neurospora Crassa on Cotton Fabric Properties [Volume 9, Issue 3, 1996]
-
Salami, M.
Poly(styrene-co-butyl acrylate)/Clay Nanocomposite
Latexes Synthesized via In Situ Atom Transfer
Radical Polymerization in Miniemulsion: Activators
Generated by Electron Transfer Approach [Volume 24, Issue 1, 2011, Pages 55-67]
-
Salami-Kalajahi, M.
Effect of Reactant Concentration Variations on the Kinetics of Atom Transfer Radical Polymerization of Acrylonitrile [Volume 23, Issue 1, 2010, Pages 53-64]
-
Salami-Kalajahi, M.
A Comparative Study between FRP and ATRP of Styrene by Monte Carlo Simulation: Effect of Free Radical Mobility [Volume 23, Issue 5, 2011, Pages 387-395]
-
Salami-Kalajahi, M.
Study of Atom Transfer Radical Polymerization of Styrene and Its Gel Effect by Monte Carlo Simulation Method [Volume 22, Issue 1, 2009, Pages 11-19]
-
Salami-Kalajahi, M.
Preparation of Polystyrene Nanocomposite by In Situ Atom Transfer Radical Polymerization: Study of Polymerization Kinetics in the Presence of Clay [Volume 22, Issue 4, 2009, Pages 261-272]
-
Salami-Kalajahi, M.
Intermediate Radical Termination Theory in Elucidation of RAFT Kinetics and Comparison to Experimental Data [Volume 21, Issue 6, 2009, Pages 503-513]
-
Salami-Kalajahi, M.
Employing Moment Equations Model to Study the Effect of Different Active Centers on Homopolymerization Kinetics of Ethylene [Volume 21, Issue 5, 2009, Pages 431-444]
-
Salami-Kalajahi, M.
Study of Slurry Ethylene Polymerization with Ziegler-Natta Catalysts: Kinetics and Investigation on the Rate
of Monomer Consumption Equation [Volume 20, Issue 6, 2008, Pages 521-527]
-
Salami-Kalajahi, M.
Investigating the Effect of Different Kinetic Parameters on UHMWPE Synthesis [Volume 21, Issue 2, 2008, Pages 141-148]
-
Salami-Kalajahi, mahdi
Effect of Hydrogen and Comonomer on the Kinetics of Slurry Polymerization of Ethylene and Properties of
Produced Polyethylene over TiCl4/MgCl2/AlEt3 Catalyst [Volume 22, Issue 1, 2009, Pages 3-10]
-
Salami-Kalajahi, Mahdi
Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite via In Situ AGET ATRP [Volume 24, Issue 2, 2011, Pages 101-112]
-
Salami Hosseini, Mahdi
Prediction of Bubble Size Distribution in a Batch Foaming System of Polystyrene-Supercritical CO2 [Volume 36, Issue 4, 2024, Pages 437-450]
-
Salami Kalajahi, Mehdi
Preparation of Thermally-Resistant Nanohybrids Based on Novolac and Epoxy Resins and Epoxidized Carbon Nanotubes [Volume 31, Issue 4, 2018, Pages 373-383]
-
Salari, D.
Modification of Polyphenol - formaldehydes by Some Natural Oils [Volume 16, Issue 3, 2003]
-
Salari, Meysam
Preparation and Characterization of Sintered Microporous Polymeric Filters [Volume 30, Issue 4, 2017, Pages 311-323]
-
Salarian, Mohammad Mahdi
Effect of Polyamide 6 on Crystalline Structure of Polymer in PVDF-Nanoclay Nanocomposite [Volume 25, Issue 1, 2012, Pages 41-51]
-
Salarieh, M.
Effect of DRISPAC Polymer on the Rheological Behaviour of Drilling Mud [Volume 13, Issue 2, 2000]
-
Salarieh, M.
Application of DRISPAC Polymer in the Water Loss Control of Drilling Mud [Volume 14, Issue 6, 2002]
-
Salarifar, Zahra
Rheology of Semi-Cured Silicone Rubber Compounds [Volume 27, Issue 3, 2014, Pages 259-251]
-
Salehi, H.
Kinetic Study of the Auto-oxidation of Polyurethane [Volume 12, Issue 2, 1999]
-
Salehi, H.
Statistical Modeling for Toluene Diisocyanate and Polypropylene Glycol Polymerization with Ferric Acetylacetonate as Catalyst [Volume 14, Issue 1, 2001]
-
Salehi, H.
Sioplas Crosslinking of PE: The Effect of EVA on Properties of XLPE [Volume 14, Issue 5, 2002]
-
Salehi, H.
Sioplas Crosslinking of Polyethylene: Study of the Effect of Alumina Trihydrate and Antimony Trioxide on Properties of XLPE [Volume 15, Issue 6, 2003]
-
Salehi, Hamid Reza
Synthesis and Mechanical Properties Investigation of Nano TiO2/Glass/Epoxy Hybrid Nanocomposite [Volume 28, Issue 4, 2015, Pages 276-263]
-
Salehi, M.
Maleic Anhydride Reaction of HDPE and Preparation of High Impact HDPE Calcium Carbonate [Volume 12, Issue 1, 1999]
-
Salehi, Manouchehr
Synthesis and Mechanical Properties Investigation of Nano TiO2/Glass/Epoxy Hybrid Nanocomposite [Volume 28, Issue 4, 2015, Pages 276-263]
-
Salehi-Mobarakeh, H.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, I: Effect of Pressure [Volume 16, Issue 3, 2003]
-
Salehi Mobarakeh, H.
Synthesis of Vinyl Acetate-ethylene Copolymer Through Batch Emulsion Polymerization, II: Effect of Buffer and Emulsifier Concentration [Volume 16, Issue 4, 2003]
-
Salehi Mobarakeh, H.
Synthesis of Vinyl Chloride-vinyl Acetate Copolymer Through Batch Emulsion Polymerization [Volume 16, Issue 4, 2003]
-
Salehi Mobarakeh, H.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Salehi Mobarakeh, H.
The Effect of Aqueous/Organic Phase Ratio and Type of Initiator on Emulsion Polymerization of Vinyl Acetate-ethylene Copolymer [Volume 18, Issue 4, 2005, Pages 249-256]
-
Salehi Mobarakeh, H.
Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
-
Salehi Moghaddam, Hosein
Effect of V-Notched Rail Shear Test Parameters on In-Plane Shear Properties of Glass/Epoxy Composites [Volume 29, Issue 6, 2017, Pages 531-541]
-
Salehpour, B.
The Effects of γ-Ray Irradiation Dose on the Electrical Resistance and PTC Temperature of Polyethylene/Carbon Composite [Volume 20, Issue 4, 2007, Pages 325-329]
-
Salimi, Ali
Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
-
Salimi, Ali
Potassium Permanganate Solution-containing Polyethylene Nanocomposite Film Used as Color Indicator in Smart Packaging [Volume 30, Issue 3, 2017, Pages 183-196]
-
Salimi, Ali
Modification of Rice Husk with Glycidyl Crosslined Microgel Latex for Preparation of Hybrid Hydrogel [Volume 31, Issue 2, 2018, Pages 129-141]
-
Salimi, Ali
Modified Silane Polymer Adhesive: Effect of Aluminum
Substrate Treatment Methods and the Adhesive
Thickness on Adhesive Durability and Joint Strength [Volume 34, Issue 1, 2021, Pages 43-54]
-
Salimi, Ali
Dispersion of Glycidyl POSS-modified Silica Nanoparticles in Epoxy [Volume 34, Issue 2, 2021, Pages 131-142]
-
Salimi, Ali
Bio-based Adhesives: Advantages and Confronting Their Challenges [Volume 36, Issue 3, 2023, Pages 209-230]
-
Salimi, Farhad
Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
-
Salimi konari, Hamed
Dextran/Bioactive Glass Nanocomposite Hydrogels:
Effect of Dextran Molecular Weight and Content on
Swelling Behavior and Structural Characteristics [Volume 34, Issue 3, 2021, Pages 249-265]
-
Salimian, Sadaf
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
SalimiKenari, Hamed
Concentration Effect of Mcroencapsulated 1-Methyl Imidazole Curing Agent with Solid Epoxy Shell on Mechanical Properties of Epoxy Resin [Volume 34, Issue 6, 2022, Pages 523-532]
-
Salmani, Leila
Electrospinning of Silk Fibroin/Β-Cyclodextrin Nanofibers for Controlled Drug Release [Volume 29, Issue 1, 2016, Pages 89-100]
-
Samadi, Ali
Effect of Organo-clay Modifier and Compatibilizer on the Morphological Development and Cold Crystallization Kinetics of Polylactide/Polyethylene/Montmorillonite Nanocomposites [Volume 31, Issue 3, 2018, Pages 251-264]
-
Samadi, Kimia
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Samadi Maybodi, Abdolraouf
Fabrication of Antibacterial Mixed matrix Membranes Using zinc Oxide and Copper Oxide Nanoparticles and ZnO/CuO Nanocomposite [Volume 35, Issue 1, 2022, Pages 25-38]
-
Samadikuchaksaraei, Ali
Nanofibrous Scaffolds based on Poly(caprolactone)/Chitosan/Poly(vinyl alcohol) Blend for Skin Tissue Engineering [Volume 26, Issue 2, 2013, Pages 159-170]
-
Samaei, Sedigheh
Effects of SBR Molecular Structure and Filler Type on the Hyper-Viscoelastic Behavior of SBR/BR Tread
Compounds Using a Combined Numerical/Experimental Approach [Volume 32, Issue 1, 2019, Pages 65-78]
-
Samiee, S.
Modified Lignosulfonate as a Concrete Superplasticizer [Volume 8, Issue 3, 1995]
-
Sanaeepur, H.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Sanaeepur, Hamidreza
Effects of Preparation Conditions on Morphology of Polyacrylonitrile Micro/Ultrafiltration Membrane and Its Application in Protein and Fat Separation from Milk [Volume 27, Issue 1, 2014, Pages 78-63]
-
Sanaeepur, Hamidreza
CO2/N2 Gas Separation Using Nanocomposite Membranes Comprised of Ethylene-Propylene-Diene Monomer/Multi-Walled Carbon Nanotube (EPDM/MWCNT) [Volume 28, Issue 3, 2015, Pages 224-211]
-
Sanaeepur, Hamidreza
Preparation of Ethylene Vinyl Acetate/Zeolite 4A Mixed Matrix Membrane for CO2/N2 Separation [Volume 29, Issue 3, 2016, Pages 231-247]
-
Sanaeepur, Hamidreza
Preparation and Characterization of a Cross-linked Matrimid/Polyvinylidene Fluoride Composite Membrane for H2/N2 Separation [Volume 29, Issue 6, 2017, Pages 505-517]
-
Sanaeepur, Hamidreza
Modification of Poly(ether-b-amide) Membrane Properties Using Glycerol for CO2/N2 Gas Separation [Volume 31, Issue 5, 2019, Pages 461-474]
-
Sanaei, Leila
Efficiency of Magnetic Granular Adsorbent Based on Natural Zeolite/Chitosan in Removing Arsenic from Polluted Water [Volume 35, Issue 4, 2023, Pages 367-379]
-
Sangdehi, H.A.Khonakdar
Investigation of Conformational Rheological Models for Polymer Melts and Concentrated Solutions [Volume 17, Issue 2, 2004]
-
Sanjari Shahrezaei, Mohamad Ali
Effect of Nanocellulose on Phase Behavior of off-Critical PS/PVME Blend [Volume 30, Issue 6, 2018, Pages 531-545]
-
Saraei, M.
Synthesis of Poly(para-aminostyrene) from 4-Chloromethyl Styrene Homopolymer and Its Styrene Copolymer [Volume 23, Issue 6, 2011, Pages 455-465]
-
Saraei, M.
Studies on Electroactivity, Conductivity and Solubility of 2-Anilinoethanol Homopolymer and its Aniline Copolymers Using Oxidation andElectrochemical Methods [Volume 22, Issue 6, 2010, Pages 447-455]
-
Sarafrazi, Marzieh
Optimization of Curing Conditions and Effect of Plasticizer Amount on the Mechanical and Thermal Properties of Epoxy Resin [Volume 33, Issue 6, 2021, Pages 479-495]
-
Sarai, M.
Investigation on the Effect of Formulation and Process Variables of Polyethylene Foams Production [Volume 14, Issue 2, 2001]
-
Sarbolouki, M.N.
Synthesis of Poly(dl-lactide-co-dl-3,6-dimethyl-morpholine-2,5-dione) [Volume 14, Issue 3, 2001]
-
Sarmadi, M.
Studying the Performance of Coal Tar Epoxy on ST37 Steel in Submerge Zone of Persian Gulf [Volume 20, Issue 4, 2007, Pages 349-359]
-
Sarnamy, M.Khaleghi
Effects of Natural Polymers and Chemical Coagulants on the Dewatering of Sewage Sludge [Volume 19, Issue 6, 2007]
-
Sarsabili, Mohammadreza
Atom Transfer Radical Polymerization of Styrene in Presence of Mesoporous Silica Nanoparticles: Application of Reverse, Simultaneous Reverse and Normal Initiation Techniques [Volume 27, Issue 1, 2014, Pages 90-79]
-
Sattari Vafaee, A.H.
Investigating and Comparing the Type and the Effect of Alcohol and Catalyst in the Hydrolysis of Ethylene-vinyl Acetate Copolymer by FTIR Spectroscopy [Volume 19, Issue 1, 2006, Pages 67-76]
-
Sattarie Wafaie, A.H.
Study of Ethylene/Vinyl Acetate Transformation to Ethylene/Vinyl Alcohol Copolymer by NMR and DSC [Volume 20, Issue 4, 2007, Pages 399-406]
-
Sayyadnejad, M.A.
Synthesis of Ethylene Bis-stearamide for Acrylonitrile-Butadiene-Styrene Polymer [Volume 22, Issue 6, 2010, Pages 439-446]
-
Sayyadnejad, M.A.
To Control Bead Size Distribution in Suspension Polymerization [Volume 21, Issue 5, 2009, Pages 409-415]
-
Scantlebury, J.D.
Effect of Surface Pretreatment on Adhesion Strength and Corrosion Resistance of Powder Coated Aluminium [Volume 12, Issue 3, 1999]
-
Sedaghat, Marzieh
The Effect of LiCl and Coagulation Bath Temperature on the Structure and Performance of PVDF Membranes [Volume 28, Issue 4, 2015, Pages 311-301]
-
Sedaghat, Marzieh
Effects of TiO2 and ZnO Nanoparticles on the Structure and Fouling Behavior of Polyethylene Membranes [Volume 28, Issue 6, 2016, Pages 493-477]
-
Sedighi, Sara
Morphology and Electrochemical Properties of a Gel Blend Polymer Electrolyte Based on PVDF-HFP/PEO Blend [Volume 34, Issue 1, 2021, Pages 55-68]
-
Sedighi poor, M.
Hot Mercerizing of Cotton/Polyester Blend Fabric: The Effect of some Factors on Dye and Moisture Absorption of the Fabric [Volume 19, Issue 2, 2006, Pages 101-109]
-
Seifali Abbas-Abadi, Mehrdad
Synthesis and Functionalization of α-Olefines (6 and 10 Carbons)/Maleic Anhydride Comb-like Copolymers and Their Application in Silica Nanohybrid and Hydrogel [Volume 33, Issue 6, 2021, Pages 537-551]
-
Seifi, Azadeh
Evaluation of High Temperature Composites Thermal Properties under Different Heat Flux Conditions [Volume 27, Issue 2, 2014, Pages 160-151]
-
Seifi, Azadeh
Thermal and Mechanical Properties of Novolac-Silica Hybrid Aerogels Prepared by Sol-Gel Polymerization in Solvent-Saturated Vapor Atmosphere [Volume 28, Issue 2, 2015, Pages 168-161]
-
Seifi, Azadeh
Non-Parametric Kinetic (NPK) Analysis of Thermal Oxidation of Carbon Aerogels [Volume 30, Issue 2, 2017, Pages 163-176]
-
Semnani rahbar, M.
Effect of Polyaluminium Chloride and Polyacrylamide on Separation of Solid Contents from Paint Contained Waste Water by a Novel Coagulantflocculator Composition [Volume 19, Issue 2, 2006, Pages 111-119]
-
Semsarzadeh, M.A.
Modification of Impact Strength of Nilon 6 with Butadiene Rubber [Volume 10, Issue 4, 1997]
-
Semsarzadeh, M.A.
Maleic Anhydride Reaction of HDPE and Preparation of High Impact HDPE Calcium Carbonate [Volume 12, Issue 1, 1999]
-
Semsarzadeh, M.A.
Statistical Modeling for Toluene Diisocyanate and Polypropylene Glycol Polymerization with Ferric Acetylacetonate as Catalyst [Volume 14, Issue 1, 2001]
-
Semsarzadeh, M.A.
Modeling of the Structure of Polyvinyl Acetate by Using 1H NMR [Volume 14, Issue 2, 2001]
-
Semsarzadeh, M.A.
Experimental Design for Polymerization Reaction of Vinyl Acetate and the Hydrolysis of Polyvinyl Acetate [Volume 15, Issue 5, 2003]
-
Semsarzadeh, M.A.
Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
-
Semsarzadeh, M.A.
Structure/Glass Transition Temperature Relationship of PVAc-b-poly(MA-co-MMA) Terpolymers with Theoretical and Topological Methods [Volume 23, Issue 2, 2010, Pages 133-144]
-
Semsarzadeh, M.A.
Thermal Property and Microstructures of Poly(VAc-b-MA) and PVAc-b-Poly(MA-co-MMA) Block Copolymers and
Terpolymers [Volume 22, Issue 3, 2009, Pages 197-207]
-
Semsarzadeh, M.A.
Poly(vinyl acetate)-Based Block Copolymer/Clay Nanocomposites Prepared by In Situ Atom Transfer Radical Polymerization [Volume 22, Issue 4, 2009, Pages 295-308]
-
Semsarzadeh, M.A.
Prediction of Optimum Time for Oxygen Clearance in Solution
Polymerization of Vinyl Acetate in Isopropyl Alcohol [Volume 20, Issue 2, 2007, Pages 101-108]
-
Semsarzadeh, M.A.
Preparation of Esterified Styrene-maleic Anhydride Copolymer and Investigation of Physical and Mechanical
Properties of Its Blends with LLDPE [Volume 21, Issue 2, 2008, Pages 119-125]
-
Semsarzadeh, M.A.
Study on the Synthesis and Physical Properties of Polyethylene Imide Derived from HDPE [Volume 21, Issue 1, 2008, Pages 35-44]
-
Semsarzadeh, M.A.
Design and Manufacture of Actuator Based on Smart Shape Memory Polymer [Volume 19, Issue 1, 2006, Pages 23-32]
-
Semsarzadeh, Mohamad Ali
Kinetic Study of Atom Transfer Radical Polymerization of Methyl Acrylate with Polyvinyl Acetate Macroinitiator [Volume 24, Issue 3, 2011, Pages 181-193]
-
Semsarzadeh, Mohamad Ali
Mesoporous Silica Formation by Block Copolymers and Cetyltrimethylammonium Bromide as Structure Control Agent [Volume 24, Issue 6, 2012, Pages 445-453]
-
Semsarzadeh, mohammad ali
Synthesis of Poly(para-phenylene terephthalamide) and Preparation of Short Fibers: Effect of Sodium Sulphate on the Fibers [Volume 24, Issue 2, 2011, Pages 113-120]
-
Semsarzadeh, Mohammad Ali
SPB1 and SPB1,2: Synthesis and Determination of the Microstructure and Physical Properties [Volume 27, Issue 2, 2014, Pages 171-161]
-
Semsarzadeh, Mohammad Ali
Preparation, Characterization and Permeation Behavior of Poly(methyl acrylate)-Poly(dimethyl siloxane)-Poly(methyl acrylate) Block Copolymer/Poly(vinyl acetate) Blend Membranes [Volume 28, Issue 1, 2015, Pages 60-47]
-
Semsarzadeh, Mohammad Ali
Effects of Molecular Iodine and 4-tert-Butylcatechol Radical Inhibitor on the Radical Polymerization of Styrene [Volume 30, Issue 2, 2017, Pages 95-104]
-
Semsarzadeh*, Mohammad Ali
Preparation and Characterization of Polyurethane-Polydimethylsiloxane/Polyamide12-b-Polytetramethylene Glycol Blend Membranes for Gas Separation [Volume 26, Issue 4, 2013, Pages 348-337]
-
Sepehrian Azar, Amir
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Seraji, Mohamad Mehdi Seraji1,
Thermal and Mechanical Properties of Novolac-Silica Hybrid Aerogels Prepared by Sol-Gel Polymerization in Solvent-Saturated Vapor Atmosphere [Volume 28, Issue 2, 2015, Pages 168-161]
-
Seyed, M.
Synthesis of an Epoxy Resin Having Anthracene Moiety: 1,4- Dihydroxytriptycene Instead of Bisphenol A [Volume 10, Issue 1, 1997]
-
Seyed Mohaghegh, S. Mohammad
Determination of Glucose with Amperometric Method Using Polyaniline/Glutaraldehyde/Glucose Oxidase Modified Electrode [Volume 25, Issue 6, 2013, Pages 421-431]
-
Seyrani, Rana
Carrageenan-based Hydrogel Nanocomposites Prepared in Presence of Carbon Nanotubes and Their Adsorption
of Brilliant Green [Volume 28, Issue 6, 2016, Pages 528-517]
-
Shabani, E.
The Effect of Leather Fiber upon Vulcanization Characteristics and Physical-Mechanical Properties of Elastomeric Compounds [Volume 20, Issue 4, 2007, Pages 391-397]
-
Shabani, Iman
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Shabani, Iman
Conductive Nanofibrous Scaffolds for Tissue Engineering Applications: A Review [Volume 32, Issue 3, 2019, Pages 189-210]
-
Shabani, Sh.
Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
-
Shabgard, Mohammadreza
Experimental Study on Oriented Mechanical, Rheological and Optical of a Multi-Walled Carbon Nanotube/Polymethyl Methacrylate Anisotropic Nanocomposite [Volume 29, Issue 3, 2016, Pages 249-263]
-
Shabzendedar, Sahar
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Shadlou, Shahin
Studies on Fracture Behavior of Epoxy/DWNT Nanocomposites by Molecular Dynamics Simulation [Volume 25, Issue 4, 2012, Pages 315-322]
-
Shaghaghi, S.
Bulk Polymerization of Styrene with Two Initiators [Volume 14, Issue 3, 2001]
-
Shaghaghi, ُSamira
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Shahabi, Mehdi
Polymer-Modified Bitumen Production Based on Performance Grade for Application in Different Zones of Iran [Volume 24, Issue 6, 2012, Pages 467-479]
-
Shahbazi, Mohammad Javad
Preparation, Characterization and Analysis of Fouling Mechanisms of TiO2- Embedded PVDF Membranes [Volume 29, Issue 6, 2017, Pages 543-558]
-
Shahedifar, V
Study on Properties and Performance of Cotton/Epoxy Composites Inhibitor [Volume 23, Issue 3, 2010, Pages 203-211]
-
Shahrabadi, A.
The Effect of a Number of Selective Points in Modelling of Polymerization Reaction by Monte Carlo Method: Studying the Initiation Reaction [Volume 15, Issue 5, 2003]
-
Shahriari Kahkeshi, Maryam
Prediction of Mechanical Properties of LDPE-TPS Nanocomposites Using Adaptive Neuro-Fuzzy Inference System [Volume 25, Issue 3, 2012, Pages 171-180]
-
Shahrokhi, M.
The Temperature Control of Batch Polymerization Reactors [Volume 4, Issue 2, 1991]
-
Shahrokhi, M.
Effective Parameters in the Design of a Loop Reactor for Bulk Propylene Polymerization with Z-N Catalyst [Volume 22, Issue 4, 2009, Pages 309-321]
-
Shahsanaei Goneirani, Zahra
A Review on Chitosan-Containing Polyurethanes: Synthesis, Properties and Applications [Volume 36, Issue 1, 2023, Pages 3-22]
-
Shahsavari, Elaheh
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Shaieloozadeh, H.
The Effect of Different Marine Coatings on the Frictional Drag Force of Vessel [Volume 19, Issue 4, 2006]
-
Shajari, Golnaz
In situ gelling hydrogels based on biodegradable polymers for effective ocular drug delivery: A review [(Articles in Press)]
-
Shakeri, A.
Investigation on the Effect of Type, Quantity and Size of Straw Particles on the Mechanical Properties of Crops Straw-High Density Polyethylene Composites [Volume 19, Issue 4, 2006]
-
Shakeri, A.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Shakeri, A.
Study of the Effect of Murray Red Gum Tree Age on Chemical Components and Cellulose Degree of Polymerization [Volume 20, Issue 5, 2008, Pages 481-488]
-
Shakeri, A.R.
Investigation of Silane Coupling Agent on Physical and Mechanical Properties of PVC/Cellulose (PVC/Pulp Paper) Fiber Composite [Volume 16, Issue 2, 2003]
-
Shakeri, Alireza
Effect of Nanoclay and Microwave Thermal Treatment on Mechanical Properties of MDF Dust-PP Nanocomposite [Volume 25, Issue 4, 2012, Pages 323-331]
-
Shakeri, Alireza
The Mechanical Properties of Recycled Polyethylene-Polyethylene Terephthalate Composites [Volume 27, Issue 6, 2015, Pages 389-381]
-
Shakeri, Alireza
Colloidal Preparation of Polyaniline-Poly(vinyl alcohol) - SiO2 Nanocomposite and Study of its Anti-corrosive Properties [Volume 28, Issue 1, 2015, Pages 46-39]
-
Shakeri, Alireza
Thermomechanical Properties of Poly(ethylene oxide)/Nanochitin Nanocomposite Prepared by Mechanical Method [Volume 30, Issue 3, 2017, Pages 247-254]
-
Shaki, Hanieh
Fabrication of Nanofibrous Hybrid Scaffolds from Polylactic Acid-Graphene and Gelatin for Application in Bone Tissue Engineering [Volume 31, Issue 6, 2019, Pages 563-574]
-
Shakoori, Parinaz
Fibrous Structures Fabricated from
Polylactic Acid and Nanofibrillated Chitosan/
Zinc Oxide Nanoparticles [Volume 34, Issue 2, 2021, Pages 173-190]
-
Shakouri, Zahra
Molecular Diffusion of Toluene through CaCO3-Filled Natural Rubber Composites [Volume 25, Issue 2, 2012, Pages 137-150]
-
Shakouri, Zahra
Physical Chemistry and Rheological Behavior of Commercial Polymers of Viscosity Index Improver Used in Motor Oil Industry [Volume 24, Issue 3, 2011, Pages 215-230]
-
Shamaei-Kashani, Alireza
Latest Advances in Acid Hydrolysis Technique for Production of Cellulose Nanocrystals (CNCs) as Reinforcing Component in Epoxy-Based
Nanocomposites [Volume 36, Issue 3, 2023, Pages 231-258]
-
Shamardani, K.
Adhesion Improvement of Epoxy Coating on Aluminium Substrate Using an Amino-Silane Compound [Volume 16, Issue 2, 2003]
-
Shamei, Ali
Synthesis of Silver Nanoparticles in Cotton Fabric by Polyvinyl-2-pyrrolidone as a Reducing and Stabilizing Agent [Volume 25, Issue 4, 2012, Pages 265-275]
-
Shams Nateri, A.
Coating Some Synthetic Fibers by Polyaniline to Improve Conductivity [Volume 10, Issue 1, 1997]
-
Shamsi, Mohsen
Mechanical Properties and Kinetics of Thermal Degradation of Bioplastics based on Straw Cellulose and Whole Wheat Flour [Volume 25, Issue 1, 2012, Pages 65-74]
-
Sharghi, Ehsan
Investigating the effect of graphene oxide nanosheets on the barrier properties of high density polyethylene coated by layer-by-layer assembly method [Volume 35, Issue 6, 2023, Pages 581-594]
-
Shariat Panahi, H.
Modification of Impact Strength of Nilon 6 with Butadiene Rubber [Volume 10, Issue 4, 1997]
-
Sharif, Alireza
Non-Parametric Kinetic (NPK) Analysis of Thermal Oxidation of Carbon Aerogels [Volume 30, Issue 2, 2017, Pages 163-176]
-
Sharif, Farhad
Synthesis of Polyaniline/Graphene Oxide Composites with Different Morphologies and Investigation of Their Electrochemical Properties [Volume 29, Issue 5, 2017, Pages 469-477]
-
Sharifi, M.
Blending of Hydrocarbon and Rosin Ester-basedResins to Study its Effect on the Physical andMechanical Properties of Thermoplastic Road Markings [Volume 22, Issue 6, 2010, Pages 457-467]
-
Sharifi-Sanjani, Naser
Preparation and Characterization of Phenolic Resin/Montmorillonite Nanocomposite [Volume 25, Issue 2, 2012, Pages 83-90]
-
Sharifi Sanjani, N.
Evaluation of the Excimer and CO2 Laser Effects on the Surface Properties of Polyethylene Terephthalate [Volume 12, Issue 1, 1999]
-
Sharifpour, Hosein
Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
-
Shayegh, A.
Studying the Effective Parameters on Welding of Polyethylene Joints [Volume 16, Issue 3, 2003]
-
Shayesteh, Keivan
The Effect of non-Newtonian Behavior of Fluid on the Tubular Reactor Performance and Studying Different Variables in Relation to the Degree of Conversion [Volume 27, Issue 6, 2015, Pages 436-423]
-
Shayesteh, Massod
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Sheibani, Esmaeil
Hole-Transporting Materials Based on p-Type Polymers in Invert Perovskite Solar Cells [Volume 36, Issue 2, 2023, Pages 107-132]
-
Sheibani, Esmaeil
Electron Transporting Materials Based on n-Type Polymers in Inverted Perovskite Solar Cells: A Review [Volume 36, Issue 5, 2023, Pages 457-485]
-
Sheikh, N.
Radiation Curing of UPEs/EP Resin System [Volume 8, Issue 2, 1995]
-
Sheikh, N.
Functionalization of PP Wax with Maleic Anhydride by Gamma-ray [Volume 14, Issue 4, 2001]
-
Sheikh, N.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Sheikhi Mehrabadi, Z.
CO2/CH4 Separation via Polymeric Blend Membrane [Volume 23, Issue 1, 2010, Pages 17-28]
-
Sheikholeslami, B.
Synthesis of Aliphatic Polyamides Containing 4-(4-Benzophenone)Urazole Linkages [Volume 11, Issue 3, 1998]
-
Shelesh-Nezhad, K.
Dimensional Prediction of Injection Molded Parts Using Melt Pressure Trace and Neural Network [Volume 21, Issue 3, 2008, Pages 191-199]
-
Shelesh-Nezhad, Karim
Mechanical Properties, Shrinkage Behavior and Water Absorption of PA6/PP/CaCO3 Nanocomposites [Volume 24, Issue 6, 2012, Pages 481-492]
-
Shelesh-Nezhad, Karim
Experimental Studies on Mechanical Properties and Thermal Behavior of Polyoxymethylene/CaCO3
NanoComposites [Volume 27, Issue 1, 2014, Pages 62-51]
-
Shelesh-Nezhad, Karim
Experimental Study on Wear Behavior of Polyacetal Nanocomposite Gears [Volume 36, Issue 2, 2023, Pages 151-165]
-
Shidrang, Sahel
Methyl Violet Dye Absorption from Aqueous Solutions by Nanomagnetic Hydrogels Based on κ-Carrageenan and Acrylic Acid [Volume 29, Issue 4, 2016, Pages 365-376]
-
Shiran, F.
Preparation and Characterization of Liquid Epoxy Resin DGEBA [Volume 16, Issue 1, 2003]
-
Shiravandi, Ayoub
Studies on Sulfate Group Substitution on Sodium Sulfated Alginate Electrospinning [Volume 35, Issue 3, 2022, Pages 215-231]
-
Shiraz, N.Zebarjad
A Method of Improvement of the Water Absorption Resistance of Cellulosic Fibers [Volume 9, Issue 3, 1996]
-
Shirkavand, Mohammad Javad
Correlation between Microstructure and Rheological Properties of Broad Molecular Weight Distribution High Density Polyethylenes [Volume 28, Issue 1, 2015, Pages 38-27]
-
Shirkavand Hadavand, Behzad
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Shisheboran, M.
Effect of Enzymatic Hydrolysis on the Weight Loss and Pilling of Cotton and Cotton/Polyester Fabrics [Volume 11, Issue 1, 1998]
-
Shiva, M.
Effect of Mixing Process on Mooney Viscosity and Die Swell Behavior of Rubber Compound [Volume 21, Issue 5, 2009, Pages 389-399]
-
Shiva, M.
Improvement in Tear Resistance and Crack Growth of Tire Tread Compound with Effective Cure Systems and
Use of Semi-Reinforcement Fillers [Volume 21, Issue 4, 2008, Pages 285-295]
-
Shiva, M.
Effect of Process Parameters of Mixing on Physicomechanical and Rheological Properties of Rubber Compound [Volume 21, Issue 3, 2008, Pages 225-234]
-
Shiva, Mehdi
Study of Abrasion of Rubber Materials by Experimental Design, Response Surface and Artificial Neural Network Modeling [Volume 28, Issue 3, 2015, Pages 209-197]
-
Shiva, Mehdi
Water Jet Rubber Powder in Passenger Tyre Tread Formulation [Volume 31, Issue 2, 2018, Pages 111-127]
-
Shiva, Mehdi
Aluminum Compounds Prepared with Spray Pyrolysis in Tyre Compounds Formulations: Mechanical and Heat Conductivity Behavior of Tyre Tread [Volume 32, Issue 1, 2019, Pages 43-53]
-
Shoeyb, Zahra
Preparation and Characterization of HDPE/EVA Flat Sheet Membranes by Thermally Induced Phase Separation Method [Volume 28, Issue 2, 2015, Pages 159-149]
-
Shoeyb, Zahra
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Shojaei, Alireza
Effect of Exfoliated Graphene Nanoplatelets on Rheological, Morphological, Mechanical and Thermal Properties of Immiscible Polypropylene/Polystyrene (PP/PS) Blends [Volume 29, Issue 5, 2017, Pages 478-488]
-
Shojaei, M.
Preparation of Phosphino(polyacrylic acid) and Study on Its Application as Precipitation Inhibitor [Volume 12, Issue 1, 1999]
-
Shojaosadati, S.A.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Shojaosadati, S.A.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Shojasadati, S.A.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Shokoohi, Shirin
Elastomer Nanocomposites Based on Organoclay/IIR/EPDM: Microstructure and Mechanical Properties [Volume 24, Issue 5, 2012, Pages 343-353]
-
Shokoohi, Shirin
Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
-
Shokri, A.A
Effect of Mixing Procedures and Conditions on Mechanical and Rheometrical Properties of NBR/PVC Blends [Volume 19, Issue 3, 2006]
-
Shokri, Elham
Fabrication of ZSM-5 Zeolite Dispersed Polyethylene Membranes via Thermally Induced Phase Separation
Method [Volume 27, Issue 5, 2014, Pages 371-359]
-
Shokri, Elham
Preparation and Characterization of HDPE/EVA Flat Sheet Membranes by Thermally Induced Phase Separation Method [Volume 28, Issue 2, 2015, Pages 159-149]
-
Shokri, Elham
A PSf/Amino Acid-Modified Montmorillonite Mixed Matrix Membrane for Arsenic Removal from Water: Preparation and Evaluation of Its Properties [Volume 30, Issue 1, 2017, Pages 75-88]
-
Shokri, Elham
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Shokri-Azar, M.
Study of Mechanical Properties of HDPE/LLDPE Blend [Volume 10, Issue 4, 1997]
-
Shokrieh, M. Mahmood
A Novel Procedure for Prediction of Mixed Mode I/II in Fracture Toughness of Laminate Composites [Volume 27, Issue 2, 2014, Pages 120-111]
-
Shokrieh, M.M.
Simulation of Pultrusion Manufacturing Process of Glass/Polyester Composites [Volume 23, Issue 4, 2010, Pages 323-333]
-
Shokrieh, M.M.
Residual Stresses in Thermoplastic Composites: A Review [Volume 21, Issue 6, 2009, Pages 477-493]
-
Shokrieh, M.M.
Resin Flow in Fiber Preformed by Vacuum Assisted Resin Transfer Molding with Flexible Tools [Volume 21, Issue 4, 2008, Pages 329-338]
-
Shokrieh, M.M.
Development of an Integral Method for Determination of Non-uniform Residual Stresses in Laminated Composites [Volume 21, Issue 4, 2008, Pages 347-355]
-
Shokrieh, M.M.
Fatigue Life Evaluation of Unidirectional Composites by Using Residual Strain Energy [Volume 21, Issue 1, 2008, Pages 19-26]
-
Shokrieh, M.M.
Effects of Free Edge Interlaminar Shear Stress on the Residual Stresses of Polymer Composites
Using Hole Drilling Method [Volume 20, Issue 4, 2007, Pages 337-347]
-
Shokrieh, Mahmood Mehrdad
Experimental Investigation on Fatigue Behavior of Epoxy Resin under Load and Displacement Controls [Volume 27, Issue 5, 2014, Pages 382-373]
-
Shokrieh, Mahmood Mehrdad
Preparation and Characterization of a Polymer Concrete and Estimation of Compressive Strength Using a Two-Phase Micromechanical Model [Volume 28, Issue 2, 2015, Pages 120-111]
-
Shokrolahi, F.
Determination of Crosslinking Density of Poly(dimethylsiloxane) Network by Calorimetry and its Comparison with Equilibrim Swelling Method [Volume 12, Issue 4, 1999]
-
Shokrolahi, Fatemeh
Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
-
Shokrolahi, Parvin
Cure Kinetics of Epoxy-Novolac Resin Containing Tetrabromo-bisphenol-A as a Flame Retardant by Isothermal Calorimetry Method [Volume 26, Issue 6, 2014, Pages 547-537]
-
Shokrolahi, Parvin
Surface Modification of Indium Tin Oxide Nanoparticles to Improve Its Distribution in Epoxy-Silica Polymer Matrix [Volume 27, Issue 4, 2014, Pages 289-281]
-
Shokrollahi, P.
Preparation and Characterization of Polyurethane Orthopaedic Bandages [Volume 8, Issue 4, 1995]
-
Shokrollahi, Parvin
Polycaprolactone/Polytetrahydrofuran Supramolecular Polymer Blends: Mechanical and Thermal Properties [Volume 25, Issue 2, 2012, Pages 151-163]
-
Shokrzadeh, Akram
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Shoushtari-Zade, Aida
Sample Thickness and Structural Changes in Thermo-Oxidative Degradation of Polybutadiene [Volume 24, Issue 2, 2011, Pages 93-99]
-
Siahkamari, Mohsen
Conversion of Lignocellulosic Bagasse Biomass into Hydrogel [Volume 29, Issue 5, 2017, Pages 455-467]
-
Siroos Azar, M.
Drug Release Modeling from a Novel Temperature-responsive Polymeric System [Volume 20, Issue 3, 2007, Pages 257-269]
-
Sobhan Manesh, K.
Synthesis and Characterization of Diaminodisulfide Derivatives and
their use as Accelerator in Curing Process of Rubber Compounds [Volume 20, Issue 2, 2007, Pages 179-186]
-
Sobhani, H.
3-Dimensional Modeling of Flow of Polymeric Fluids with Various Viscosities in an Extrusion Die Using Mixed
Method and Tetrahedral Elements [Volume 21, Issue 2, 2008, Pages 167-179]
-
Sobhani, H.
Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
-
Sobhani, Hadi
Wollastonite as a Suitable Alternative to Glass Fibers in Acrylonitrile-Butadiene-Styrene Composites [Volume 32, Issue 6, 2020, Pages 509-519]
-
Sodeifian, Gholamhossein
Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
-
Soheilpour, Zahra
Influence of Multi-Walled Carbon Nanotubes on
Tensile Properties and Printing Quality of 3D-Printed Acrylonitrile-Butadiene-Styrene Nanocomposites [Volume 32, Issue 6, 2020, Pages 497-507]
-
Sohrabnejad, Saba
Fabrication of Bi-layer Polyethersulfone-based Nanofiltration Membrane Using Chitosan/Zeolite Nanocomposite Layer [Volume 36, Issue 4, 2024, Pages 393-407]
-
Sohrabnejad, Saba
Fabrication and Surface Modification of PES-Based Nanofiltration Membrane Using Polymethyl Methacrylate/Graphene Oxide Nanoplates [Volume 36, Issue 5, 2023, Pages 551-565]
-
Sohrabpour, M.
Investigation of Photo-biodegradation of Starch-filled Polyethylene Films under the Environmental Conditions of Tehran [Volume 19, Issue 5, 2007]
-
Soleimani, M.
Design and Fabrication of Biodegradable Porous Chitosan/Gelatin/Tricalcium Phosphate Hybrid Scaffolds for Tissue Engineering [Volume 20, Issue 3, 2007, Pages 297-308]
-
Soleimani, Mojtaba
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Soleimani, Neda
Thermal Regulating Nanofibers Composite from Polyethylene Glycol, Poly(vinyl alcohol) and Titanium Dioxide Nanoparticles [Volume 32, Issue 5, 2020, Pages 385-396]
-
Soleimani Gorgani, Atasheh
Effect of Hyperbranched Polymers on Curing Behavior of UV Curable Inks in Inkjet Printing [Volume 29, Issue 3, 2016, Pages 276-285]
-
Soleymani, Meysam
Fabrication and Surface Modification of PES-Based Nanofiltration Membrane Using Polymethyl Methacrylate/Graphene Oxide Nanoplates [Volume 36, Issue 5, 2023, Pages 551-565]
-
Soleymanzadeh, F.
The Usage of Polymers in Ceramic Cores Manufacturing [Volume 7, Issue 3, 1994]
-
Solgi, R.
A New Approach in Multivariable Fuzzy Control of Polymerization Reactors: Fuzzy Trajectory Definition and Tracking [Volume 16, Issue 6, 2004]
-
Solhi, L.
Properties of Dental Adhesives Incorporated with Boehmite Nano-particles [Volume 23, Issue 5, 2011, Pages 423-433]
-
Solhi, Sadra
Fabrication of Thin Film Heterogeneous Cation Exchange Membrane in Chitosan Nanocomposite Layer with Copper Oxide Nanoparticles [Volume 35, Issue 3, 2022, Pages 281-291]
-
Solimannia, Sanaz
Polyvinyl Alcohol-Sulfonated Polyethersulfone Blend for Application in Proton-Exchange Membranes [Volume 29, Issue 5, 2017, Pages 405-414]
-
Soltan-Dehghan, Morteza
Preparation and Characterization of Phenolic Resin/Montmorillonite Nanocomposite [Volume 25, Issue 2, 2012, Pages 83-90]
-
Soltanalinegad, M.A.
Study on the Adhesion of Cushion Gum to Carcass in Retreaded Tyre [Volume 13, Issue 4, 2000]
-
Soltanalinejad, M.A.
The Effect of Synthetic Rubber Blend and Carbon Black on Cushion Gum Adhesion in Retreaded Tires [Volume 16, Issue 4, 2003]
-
Soltani, S.
Effect of Carbon Black Type on Viscoelastic Properties of Elastomeric Compounds [Volume 17, Issue 1, 2004]
-
Soltani, S.
Finite Element Analysis and Footprint Determination of a Bias Truck Tire under Vertical Static Load Using Global/Local Method [Volume 23, Issue 3, 2010, Pages 247-254]
-
Soltani, S.
Mechanical and Morphological Properties of Short Nylon Fiber Reinforced Acrylonitrile-Butadiene Rubber Composites [Volume 23, Issue 3, 2010, Pages 255-264]
-
Soltani, S.
Studies on Properties of Short Fiber Reinforced Natural Rubber Composites [Volume 21, Issue 3, 2008, Pages 259-267]
-
Soltani, Sedigheh
Mechanical and Morphological Properties of Waste Short Nylon Fibers and Nanoclay Reinforced NR/SBR Rubber Nanocomposites [Volume 25, Issue 6, 2013, Pages 491-501]
-
Soltani, Sedigheh
Compatibilization of Multi-Wall Carbon Nanotube/EPDM: Studies on the Properties of Nanocomposite [Volume 26, Issue 2, 2013, Pages 115-123]
-
Soltani, Sedigheh
Parameters Affecting the Crystalinity of Poly (vinyl alcohol) Prepared at Different Reaction Conditions [Volume 27, Issue 4, 2014, Pages 311-299]
-
Soltani-nejad, S.
Effect of Curing System on Adhesion of Polyester Cord to Rubber in Radial Tires [Volume 12, Issue 3, 1999]
-
Soltani Alkouh, Mazyar
Morphological Parameters in Relation to the Electromagnetic Properties of Microcellular Thermoplastic Polyurethane Foam in X-Band Frequency Ranges [Volume 30, Issue 1, 2017, Pages 19-30]
-
Soltani Alkuh, Maziar
The Effect of Foaming Process on the Radar Absorbing Properties of PMMA/MWCNT Composites [Volume 28, Issue 3, 2015, Pages 195-189]
-
Soltanieh, M.
Effects of Important Operating Parameters on Product Properties and Operation of HDPE Slurry Reactor [Volume 20, Issue 3, 2007, Pages 209-220]
-
Soltanzadeh Firooz Salari, Mohsen
Experimental Studies on Mechanical Properties and Thermal Behavior of Polyoxymethylene/CaCO3
NanoComposites [Volume 27, Issue 1, 2014, Pages 62-51]
-
Sonbolestan, S.E.
Effects of Structural Parameters on Mechanical Properties
Polymer/Clay Nanocomposites [Volume 20, Issue 2, 2007, Pages 187-195]
-
Sonbolestan, S.E.
Preparation of Polyurethane/Clay Nanocomposites: Investigating the Dispersion of Organoclays in PTMEG [Volume 20, Issue 3, 2007, Pages 247-255]
-
Soroush, A.
The Role of Polymeric Additives on the Morphology and Performance of a Porous Layer of Nanofiltration
Composite Membranes Based on Polyether Sulfone [Volume 23, Issue 3, 2010, Pages 213-222]
-
Soroushnia, A.
Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
-
Soroushnia, Arezo
Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
-
Sowti, Mahmud
Sodium Caseinate-Carrageenan Biopolymeric Nanocomplexes as a Carrier of Vitamin D: Study of Complex Formation, Particles Size and Encapsulation Efficiency [Volume 27, Issue 1, 2014, Pages 49-37]
-
Sowti khiyabani, Mahmoud
Plasticized Starch Based Bionanocomposites Containing Cellulose Nanowhiskers and Titanium Dioxide Nanoparticles: Study of Structure and Water Vapor Permeability [Volume 27, Issue 3, 2014, Pages 192-179]
T
-
T.,
Investigation of Factors Affecting Slurry Copolymerization of Acrylonitrile - Vinylacetate for Preparation of Acrylic Fibers [Volume 14, Issue 1, 2001]
-
T., M.
Determination of Crosslinking Density of Poly(dimethylsiloxane) Network by Calorimetry and its Comparison with Equilibrim Swelling Method [Volume 12, Issue 4, 1999]
-
Tabari, A.R.
Investigation of Mechanical Properties of Polyester-Rice Straw Composites [Volume 18, Issue 6, 2006, Pages 377-382]
-
Tabarsa, T.
Investigation of Mechanical Properties of Polyester-Rice Straw Composites [Volume 18, Issue 6, 2006, Pages 377-382]
-
Tabasizadeh, Mohammad
Effect of Zinc Oxide Nanoparticles on Mechanical, Thermal and Biodegradability of Gelatin-Based
Biocomposite Properties Films [Volume 32, Issue 5, 2020, Pages 411-426]
-
Tabatabaee Ghomi, Mohammad
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Tabatabaei, Arefeh
Characterization of Chemically Synthesized Polyaniline-Polyvinylchloride-Montmorillonite Nanocomposite [Volume 28, Issue 2, 2015, Pages 130-121]
-
Tabatabaei, Fateme Alsadat
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Tabatabaei, Masumeh
The Influence of Adding Polyurethane and Silica Nanoparticles on Conductivity Properties of
Sulfonated Polyethersulfone Membrane [Volume 32, Issue 4, 2019, Pages 349-365]
-
Tabatabaei, Zohreh Ghazi
Determination of Gel Content (C-C Crosslink) in Polybutadiene Rubber by Differential Scanning Calorimetry [Volume 27, Issue 3, 2014, Pages 211-203]
-
Tabatabaie Yazdi, M.
Enzyme Biopolishing of Cotton Fabric: Effects of Trichoderma Cellulase on Cotton Fabric Properties [Volume 9, Issue 1, 1996]
-
Tabrsa, T.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Taebi, A
Application of Chitosan as an Adsorbent for Colour Removal of Textile Industrial Wastewaters [Volume 12, Issue 4, 1999]
-
Taghdir, E.
Effect of SBS/HVS Blend on Modification of Physical and Chemical Properties of Bituminous Emulsion Insulators [Volume 23, Issue 4, 2010, Pages 335-344]
-
Taghi Akbari, L.
An Experimental Investigation on Fire Behavior of Expanded Polystyrene [Volume 20, Issue 3, 2007, Pages 235-245]
-
Taghi Akbari, Leila
Fire Performance of Intumescent Flame Retardant/Nanosilica/Thermoplastic Polyurethane Composite:
A Study on Synergism [Volume 36, Issue 1, 2023, Pages 73-86]
-
Taghiakbari, L.
Fire Behavior of Rigid Polyurethane Foam and Metal Faced Polyurethane Sandwich Panels and Its Fire Hazard Assessment [Volume 22, Issue 3, 2009, Pages 183-195]
-
Taghiganji, M.
Synthesis of Poly(4,4- Oxibisphenylene pyromellitimide) and Some of Its Monomers [Volume 13, Issue 1, 2000]
-
Taghikhani, Vahid
Synthesis of Cobalt nanocomposite hydrogel based on Acrylamide as an efficient chemical for sand control in the oil reservoir [Volume 35, Issue 6, 2023, Pages 529-540]
-
Taghizadeh, Ahmad Reza
An Overview on Piezoelectric Cellular Polymers: Properties and Preparation [Volume 33, Issue 1, 2020, Pages 3-24]
-
Taghizadeh, M.T.
Redox Copolymerization of 2VP-MMA by BPO-V(acac)3 System in 2-Butanone as Solvent and the Determination of Monomers Reactivity Ratios [Volume 8, Issue 1, 1995]
-
Taghizadeh, M.T.
Kinetics and Mechanism of Heterogeneous Graft Polymerization of Acrylic Acid onto Cellulose Initiated with Ceric Ammonium Nitrate [Volume 10, Issue 3, 1997]
-
Taghizadeh, S.
Dimensional Prediction of Injection Molded Parts Using Melt Pressure Trace and Neural Network [Volume 21, Issue 3, 2008, Pages 191-199]
-
Taghizadeh, S. Mojtaba
Functionality Effect of Acrylic Pressure Sensitive Adhesive Formulations on Release Performance and Adhesion Properties of Stimulants in
an Adhesive Patch [Volume 24, Issue 6, 2012, Pages 493-503]
-
Taghizadeh, S. Mojtaba
Preparation and Optimization of Labeled Chitosan Nanoparticles and Evaluation of their Release from Transdermal Drug Delivery System [Volume 28, Issue 4, 2015, Pages 344-333]
-
Taghizadeh, S.M.
Synthesis, Characterization and Drug Release Study of Vinylic Monomer of Acetaminophen [Volume 7, Issue 2, 1994]
-
Taghizadeh, S.M.
The Effect of Chitosan MolecularWeight on the Rate of Drug Release of Prednisolone Sodium Phosphate from Chitosan Microspheres Prepared by Spray Dryer [Volume 19, Issue 3, 2006]
-
Taghizadeh, S.M.
Functionality Effect of Pressure Sensitive Adhesives on In Vitro Drug Release Behavior of Fentanyl Drug in an Adhesive Patch [Volume 22, Issue 6, 2010, Pages 429-437]
-
Taghizadeh, S.M.
Study on Mucoadhesion Properties of Chitosan [Volume 20, Issue 6, 2008, Pages 515-519]
-
Taghizadeh, S.M.
Progesterone Release from Electron Beam Crosslinked Silicone Rubber and Study of its Mechanical Properties [Volume 21, Issue 3, 2008, Pages 209-216]
-
Taghizadeh, S.M.
Skin Permeation Enhancers and their Effects on Narcotic Transdermal Drug Delivery Systems through Response Surface Experimental Design [Volume 26, Issue 6, 2014, Pages 473-459]
-
Taghizadeh, S.Mojtaba
Dynamic Parameters in Preparing Chitosan Nanoparticles with Incorporation Method Using Novel Drug Delivery Systems [Volume 23, Issue 2, 2010, Pages 103-110]
-
Taghizadeh, S.Mojtaba
Evaluation of Adhesion Properties of Acrylic/Silicone Pressure Sensitive Adhesives Blends [Volume 22, Issue 2, 2009, Pages 97-105]
-
Taghizadeh, Seyed Mojtaba
Preparation and Determining Factors in Adhesion Properties of Acrylic Pressure-Sensitive Adhesive [Volume 28, Issue 6, 2016, Pages 476-465]
-
Taghvaei, Saeed
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
-
Taghvaei Ganjali, Saeed
Determination of Gel Content (C-C Crosslink) in Polybutadiene Rubber by Differential Scanning Calorimetry [Volume 27, Issue 3, 2014, Pages 211-203]
-
Taheri, N.
Wear of Unsaturated Polyester Resin Containing Titanium Dioxide Particles: The Role of Interfacial Interaction and Particles Dispersion [Volume 18, Issue 4, 2005, Pages 211-217]
-
Taheri-Behrooz, F.
Fatigue Life Evaluation of Unidirectional Composites by Using Residual Strain Energy [Volume 21, Issue 1, 2008, Pages 19-26]
-
Taheri-Behrooz, Fathollah
Effect of V-Notched Rail Shear Test Parameters on In-Plane Shear Properties of Glass/Epoxy Composites [Volume 29, Issue 6, 2017, Pages 531-541]
-
Taheri-Behrooz, Fatollah
Effect of Bending Load on the Electrical Conductivity of Carbon/Epoxy Composites Filled with Nanoparticles [Volume 32, Issue 1, 2019, Pages 79-92]
-
Taheri Qazvini, N.
Evaluation of MolecularWeight Distribution of Isotactic Polypropylene from Linear Viscoelasticity Data [Volume 21, Issue 1, 2008, Pages 71-81]
-
Tahmasebpoor, Maryam
Effective Parameters on the Formation of Natural
Zeolite-Based Granules to Remove Cationic Dyes
from Contaminated Water [Volume 34, Issue 3, 2021, Pages 267-279]
-
Tajalli, H.
Photorefraction in Polymers [Volume 9, Issue 1, 1996]
-
Tajbakhsh, M.
The Study of Transformation Products of Some Sulfur Containing Phenolic Antioxidants During Oxidative Inhibition Reaction [Volume 5, Issue 1, 1992]
-
Tajdar, Farideh
Gelatin/Polycaprolactone and Polyvinyl Alcohol/Chitosan Hybrid Nanofibers: Determining Factors on Their Morphology [Volume 35, Issue 3, 2022, Pages 201-214]
-
Tajdari, M.
An Investigation on Tensile Properties of Glass Fiber/Aluminium Laminates [Volume 22, Issue 1, 2009, Pages 31-39]
-
Tajvidi, M.
Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
-
Tajvidi, M.
The Effects of Filler Content and Water Absorption on Creep Behavior of HDPE Waste/MDF Flour Composites [Volume 21, Issue 1, 2008, Pages 53-59]
-
Tajvidi, M.
Effect of Blending Method on the Mechanical Properties of Wood-Plastic Composites [Volume 20, Issue 4, 2007, Pages 361-367]
-
Takdastan, Afshin
Physicochemical Characterization of Biopolymer Chitosan Extracted from Shrimp Shells [Volume 27, Issue 6, 2015, Pages 380-371]
-
Talaghat, M.R.
Preparation of Polyethylene Glycol with Low Ash Content [Volume 13, Issue 2, 2000]
-
Talebi, A.
Fabrication of Porous Scaffolds from Poly(D,L-lactic acid) by Liquid-Liquid Phase Separation [Volume 21, Issue 6, 2009, Pages 495-501]
-
Talebi, Elnaz
Evaluation of Thermal Energy Storage of Phase Change Materials Based on Polyethylene Glycol Core and Thermal Conductive Polystyrene Shell for Heat Transfer Fluid Applications [Volume 36, Issue 3, 2023, Pages 307-320]
-
Talebi, Saeid
Immobilization of Metallocene Catalyst in Nano-Fumed Silica for Production of Polyethylene in a Disentangled State [Volume 32, Issue 4, 2019, Pages 303-315]
-
Tamri, Z.
Investigation of PVC and PVC/NBR Microporous Sheets and their Application in Production of Synthetic Paper [Volume 19, Issue 3, 2006]
-
Taraz Jamshidi, Yousef
Numerical and Experimental Low-Velocity Impact Behaivor of Sandwich Plates with Viscoelastic Core [Volume 29, Issue 1, 2016, Pages 55-72]
-
Tari, M.
Application of Silane Compounds for Improving Adhesion of a Silicone
Elastomer Top Coat to an Epoxy Primer [Volume 19, Issue 1, 2006, Pages 33-41]
-
Taromi, F.Afshar
Phenolic Resins Prepared from Novolac/ Resol Blend Copolymerization: Synthesis and High Temperature [Volume 5, Issue 4, 1992]
-
Taromi, F.Afshar
Solution Polymerization of Vinly Pirrolidone and its Kinetic Studies [Volume 6, Issue 1, 1993]
-
Taromi, F.Afshar
Polymer Resists in Microlithography [Volume 6, Issue 2, 1993]
-
Taromi, F.Afshar
An Introduction to Microemulsion Polymerization [Volume 6, Issue 3, 1993]
-
Taromi, F.Afshar
Preparation of Crosslinked Polyethylene Foam by Using Gamma Ray [Volume 17, Issue 2, 2004]
-
Taromi, F.Ashar
Effect of the Free Volume and Polymer Chain Length on Thermination Reaction Rate Constant in Free Radical Polymerization System [Volume 6, Issue 2, 1993]
-
Tasoji, M.
Investigation the Properties of Acrylated Epoxidized Soy Oil-Wheat Straw Particle Board [Volume 23, Issue 1, 2010, Pages 29-39]
-
Tavakol, Moslem
Electron Beam-Irradiated Crosslinked Hydrogel Scaffold form Natural and Synthetic Polymers:
Synthesis and Characterization [Volume 36, Issue 1, 2023, Pages 47-60]
-
Tavakoli, A.
Synthesis and Characterization of Suitable Resole for Preparation of Phenolic Foam [Volume 16, Issue 5, 2004]
-
Tavakoli, A.
Studying the Effective Parameters on Preparation of Resole Used in Phenolic Foam [Volume 17, Issue 1, 2004]
-
Tavakoli, Akram
Morphology, Microstructure and Physico-Mechanical Properties of Pasargad Bitumen, Modified by Ethylene-Vinyl Acetate Copolymer (EVA) and Nanoclay [Volume 28, Issue 4, 2015, Pages 299-289]
-
Tavakoli, Akram
The Effect of LiCl and Coagulation Bath Temperature on the Structure and Performance of PVDF Membranes [Volume 28, Issue 4, 2015, Pages 311-301]
-
Tavakoli, M.
Effect of the Compatibilizer Upon the Properties of Styrene-butadiene Rubber Organoclay Nanocomposites [Volume 23, Issue 1, 2010, Pages 65-74]
-
Tavakoli, M.
Study on the Synthesis and Physical Properties of Polyethylene Imide Derived from HDPE [Volume 21, Issue 1, 2008, Pages 35-44]
-
Tavakoli, Mitra
Effect of Organoclay on Photo-oxidation of Mulching Films Based on Low Density Polyethylene (LDPE)/ Ethylene-Vinyl Acetate (EVA) Containing Ca- stearate as a Pro-oxidant [Volume 29, Issue 1, 2016, Pages 45-54]
-
Tavakoli, Mitra
The Properties of SBR/ENR50 Blend Containing Nanoclay/Carbon Black Dual Filler System Cured by Electron Beam [Volume 30, Issue 2, 2017, Pages 127-137]
-
Tavakoli, Mitra
Electrical Conductivity of High Density Polyethylene/Polyamide 6 Blend Induced by Multi-wall Carbon Nanotubes [Volume 33, Issue 2, 2020, Pages 125-136]
-
Tavakolizadeh, Maryam
Hyaluronic Acid-Based Wound Dressings, [(Articles in Press)]
-
Tavanai, M.A.
The Effect of Drawing Parameters on Some Properties of Nylon 6 Filament Yarn [Volume 16, Issue 4, 2003]
-
Tavanaie, H.
An Investigation on the Behaviour of Disperse Dyes in Alkaline, Reducing and Alkaline-Reducing Media, Related to Dyeing and Printing of Polyester Goods [Volume 14, Issue 4, 2001]
-
Tavanaie, H.
Effect of Simultaneous Boiling off and Bleaching (Discontinuous) on the Strength of 100% Grey Cotton Fabric [Volume 15, Issue 4, 2002]
-
Tavanaie, M ohammad Ali
Biodegradability Study of the Blend Film of High Density Polyethylene and Poly(lactic acid) Disposable Packages Flake [Volume 29, Issue 1, 2016, Pages 27-43]
-
Tavanaie, M.A.
Matrix-Fibril Morphology and Structure of Polyblend Fibers in Melt Spinning Process: A Review [Volume 21, Issue 5, 2009, Pages 367-388]
-
Tavanaie, Mohammad Ali
High-Speed Melt Spinnability, Structural and Physical Properties of a Low Melting Copolyester Multifilament Yarn [Volume 36, Issue 5, 2023, Pages 521-537]
-
Tavanaiee, H.
Effect of Simultaneous Boiling off and Bleaching Conditions on the Degree of Whiteness and the Remaining Starch Size on 100% Grey Cotton Fabric [Volume 13, Issue 2, 2000]
-
Tavanaiee, H.
An Investigation of the Crimp Effect on the Cotton Cloth [Volume 14, Issue 2, 2001]
-
Tcharkhchi, A,
Chemiluminescence of Polyamide 6 [Volume 7, Issue 1, 1994]
-
Tcharkhtchi, A.
Chemiluminescence of Polyamides: 2-Mechanism and Kinetics of Oxidation [Volume 8, Issue 1, 1995]
-
Teymori, M.B.
Copolymerization of Ethylene and Propylene Using 4th Generation Ziegler- Natta Catalyst: Influence of Cocatalyst, External Electron Donor and Hydrogen [Volume 20, Issue 3, 2007, Pages 281-287]
-
Thomson, G.E.
Effect of Surface Pretreatment on Adhesion Strength and Corrosion Resistance of Powder Coated Aluminium [Volume 12, Issue 3, 1999]
-
Tit, P.
Study of the Effect of Triethylaluminium Concentration and Temperature on the Rate of Polymerization of Propylene: Isotacticity Index and Mv [Volume 9, Issue 3, 1996]
-
Toghraei, Marjan
Poly(styrene-alt-maleic anhydride) Conjugated with Spermine: Synthesis, Antibacterial Activity and Antibiotic Susceptibility [Volume 31, Issue 1, 2018, Pages 15-26]
-
Tohidian, Mahdi
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Tohidian, Mobina
Sulfonated Poly(ether ether ketone) and Organically Modified Montmorillonite Nanocomposite Membranes for Direct Methanol Fuel Cell [Volume 35, Issue 4, 2023, Pages 353-366]
-
Toozandeh Jani, H.
Considering the Effects of Cross - Section and Fiber Orientation of Composite Tubes Under Axial Loading in Energy Absorption [Volume 20, Issue 3, 2007, Pages 289-296]
-
Torabi, A.R.
Investigation of Fracture in V-notched Brittle Polymers under Pure Shear Loading [Volume 22, Issue 1, 2009, Pages 63-73]
-
Torkaman, J.
Investigating the Properties of Rice Husk/Urea Formaldehyde Resin Particleboard by Using Diisocyanate [Volume 21, Issue 2, 2008, Pages 95-105]
-
Torkaman, Javad
Modifying the Bondability of Rice Husk/Sodium Silicate Particleboard by Using Diisocyanate [Volume 21, Issue 1, 2008, Pages 3-8]
-
Torkman, J.
Sulfonation Effect on Reactivity of Tree Bark Extractive Materials [Volume 19, Issue 1, 2006, Pages 53-58]
-
Toulabi, Javad
Effect of Cell Morphology on Energy Absorption of Nitrile Rubber Foam [Volume 33, Issue 6, 2021, Pages 497-507]
-
Touloui, S.
Differential Scanning Calorimetry and Its Applications in the Identification of Polymers [Volume 3, Issue 4, 1990]
-
Trull, F.
Initial Study of Energy Transfer in Phthalocyanine -Mesoporphyrin-Styrene Copolymer [Volume 8, Issue 1, 1995]
V
-
Vafaeian, M.
Effect of MolecularWeight of Polyvinyl Acetate on Volume Shrinkage of an Unsaturated Polyester Resin [Volume 19, Issue 3, 2006]
-
Vafaie, Mohsen
Preparation of Composite Hydrogel Based on Polyacrylamide and the Effect of Kaolinite on Its Properties in the Reservoir Conditions [Volume 22, Issue 2, 2009, Pages 87-95]
-
Vafaiian, M.
Liquid Crystal Polymers [Volume 3, Issue 2, 1990]
-
Vafaiyan, M.
The Effect of Co-cure and Counter Cure Methods on the Properties of
Phenolic Sandwich Structures [Volume 18, Issue 3, 2005, Pages 151-157]
-
Vahab Zadeh, F.
Microencapsulation of Orange Oil and Evaluating the Effect of Some Processing Variables on Qualities of the Capsules [Volume 8, Issue 3, 1995]
-
Vahedi, Mohammad
Fabrication of Polyethersulfone-Based Symmetric Membrane by Applying Pause Stage in Coagulation [Volume 28, Issue 5, 2015, Pages 436-421]
-
Vakili, Eshagh Vakili
Preparation and Characterization of Polyurethane-Polydimethylsiloxane/Polyamide12-b-Polytetramethylene Glycol Blend Membranes for Gas Separation [Volume 26, Issue 4, 2013, Pages 348-337]
-
Vakili, M.
Study of Variation in Chemical Composition of EPDM Elastomers Synthesized with Ziegler-Natta Catalyst Based on Vanadium During Terpolymerization [Volume 16, Issue 5, 2004]
-
Vakili, Maryam
Dipodal Silane-modified Nano Fe3O4/Polyurethane Magnetic Nanocomposites: Preparation and Characterization [Volume 28, Issue 6, 2016, Pages 453-443]
-
Valipour, P.
Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes
during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
-
Valipouri, Afsaneh
Production and Characterization of Nanofibrous Yarn Containing Lignin and Feasibility Study of Its Use as a Drug Eluting Suture [Volume 35, Issue 2, 2022, Pages 111-125]
-
Valizadeh, Majid
Performance of Partially-Hydrolyzed Polyacrylamide in Water Based Drilling Fluids [Volume 26, Issue 1, 2013, Pages 3-13]
-
Valizadeh, Shahin
Superhydrophobic Polydimethysiloxane Coatings Prepared by the in Situ Growth of Silicone Nanofilaments on a Sanded Substrate [Volume 35, Issue 6, 2023, Pages 541-554]
-
Vandalvand, Mojtaba
The Mechanical Properties of Recycled Polyethylene-Polyethylene Terephthalate Composites [Volume 27, Issue 6, 2015, Pages 389-381]
-
Varamesh, A.
Improvement in the Performance of Potato Starch Used in the Water-Based Drilling Fluid via Its Chemical Modification by Grafting Copolymerization [Volume 22, Issue 4, 2009, Pages 251-260]
-
Varamesh, A.
Synthesis and Use of Amphoteric Carboxymethylcellulose Graft Copolymers in the Environmentally-acceptable Water-based DrillingFluids as a Water-sensitive Shale Stabilizer [Volume 22, Issue 6, 2010, Pages 483-493]
-
Varasteh, Hossein
Study of Abrasion of Rubber Materials by Experimental Design, Response Surface and Artificial Neural Network Modeling [Volume 28, Issue 3, 2015, Pages 209-197]
-
Vashegani Farahani, E.
Comparison of Different Biopolymers Performance in Water Treatment [Volume 18, Issue 5, 2006, Pages 285-290]
-
Vasheghani-Farahani, E.
Enhancement of Poly(β-hydroxybutyrate) Production from Methanol by Methylobacterium Extorquens Using Mixed Substrates [Volume 23, Issue 5, 2011, Pages 397-404]
-
Vasheghani-Farahani, E.
Surface Coating of Islets of Langerhans by Activated Polyethylene Glycol [Volume 20, Issue 6, 2008, Pages 529-538]
-
Vasheghani-Farahani, E.
Determination of the Optimum Conditions for Production of Chitosan Nanoparticles [Volume 20, Issue 5, 2008, Pages 457-464]
-
Vasheghani Farahani, Batoul
Preparation of a Latent Accelerator for Hot Curing of Epoxy Resin and Study of Its Effect on Mechanical Properties of Carbon Fiber Epoxy Composites [Volume 36, Issue 2, 2023, Pages 133-149]
-
Vasheghani Farahani, E.
The Effects of Temperature, Initiator and Stabilizer on Polymer Particle Size in Suspension Polymerization of Styrene [Volume 23, Issue 6, 2011, Pages 499-507]
-
Vasheghani Farahani, E.
Improvement in Purification Method of a Synthesized Cyclic Dimeric Lactide [Volume 21, Issue 3, 2008, Pages 251-257]
-
Vasheghani Farahani, E.
Effect of Volatile Fatty Acids in Production of Polyhydroxyalkanoates by Activated Sludge [Volume 21, Issue 1, 2008, Pages 83-90]
-
Vasheghani Farahani, E.
Evaluation of the Surface Treatment of Red Blood Cells by Polymer Coating [Volume 18, Issue 5, 2006, Pages 311-317]
-
Vatankhah, Elham
The Shape, Size and Uniformity Control of Biodegradable Poly(lactic-co-glycolic acid) Micro-Particles Produced by Electrospraying Method [Volume 33, Issue 3, 2020, Pages 229-242]
-
Vatankhah, M.
Study on the Effects of Temperature, Time and the Policy of Prepolymerization on Particle Morphology in Propylene Slurry Polymerization with Heterogeneous
Ziegler-Natta Catalysts [Volume 20, Issue 5, 2008, Pages 417-428]
-
Vaziri Sereshk, mohammad reza
Non-linear Behavior of Polymer Based Composite Laminates under Cyclic Thermal Shock and Its Effects on Residual Stresses [Volume 24, Issue 2, 2011, Pages 133-140]
-
Verdu, J.
Chemiluminescence of Polyamide 6 [Volume 7, Issue 1, 1994]
-
Verdu, J.
Chemiluminescence of Polyamides: 2-Mechanism and Kinetics of Oxidation [Volume 8, Issue 1, 1995]
-
Vosough, R.
A New Approach in Multivariable Fuzzy Control of Polymerization Reactors: Fuzzy Trajectory Definition and Tracking [Volume 16, Issue 6, 2004]
-
Vosoughi, M.
The Effect of Polymers on the Cellulose Wastewater Treatment and Their Comparison with Chemical Coagulants [Volume 13, Issue 1, 2000]
-
Vossoughi, M.
Controlled Release of Nutrients from Hydrogel Biopolymers [Volume 7, Issue 2, 1994]
-
Vossoughi, M.
Preparation of Pullulan Biopolymer and Kinetics of Its roduction [Volume 7, Issue 3, 1994]
-
Vosuoghi, Shohreh
Preparation and Study on Properties of Superabsorbent Hydrogel Composite of Acrylamide-Acrylic Acid and Zeolite in Agricultural Uses [Volume 30, Issue 5, 2018, Pages 391-404]
W
-
Wang, S.
Thermal Properties of Wood-Plastic Composites Prepared from Hemicellulose-extracted Wood Flour [Volume 22, Issue 3, 2009, Pages 171-181]
Y
-
Yadollahi, Mehdi
Synthesis and Characterization of Carboxymethyl Cellulose/Layered Double Hydroxide Bionanocomposites [Volume 28, Issue 4, 2015, Pages 321-313]
-
Yadollahi, Rahim
Synthesis and Evaluation of Glyoxalated Polyacrylamide (GPAM) as a Wet and Dry-Strengthening Agent of Paper [Volume 27, Issue 2, 2014, Pages 129-121]
-
Yaghani, Reza
DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
-
Yaghmaie, S.
Chitosan Extraction by Fungi in Solid State Fermentation [Volume 19, Issue 3, 2006]
-
Yaghobi, N.
Experimental Study of Particle Size Distribution in Suspension Polymerization [Volume 14, Issue 3, 2001]
-
Yaghobi, N.
Optimization of Chitin Extraction from Shrimp’s Shell and Chitosan Preparation: Study of Parameters Influence on Chitin Deacetylation Reaction and Biocompatibility Evaluation (In vitro) [Volume 15, Issue 1, 2002]
-
Yaghobi, Nakisa
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Yaghobi, Nakisa
Kinetic Studies of Poly(ethylene terephthalate)
Aminolysis Process without Catalyst [Volume 33, Issue 5, 2021, Pages 435-443]
-
Yahaghi, Effat
Effect of Plasma on Polyethylene by Positron Lifetime Spectroscopy [Volume 35, Issue 4, 2023, Pages 381-391]
-
Yahyavi, Mostafa
Studying the Properties of Polyvinyl Alcohol/Cellulose Nanofiber/Hydroxyapatite Hybrid Nanocomposite [Volume 28, Issue 2, 2015, Pages 99-91]
-
Yasami, A.
Effect of Residual Thermal Stresses in Curing Process on the Deformation of Flat and Cylindrical Composite Laminates [Volume 22, Issue 1, 2009, Pages 21-30]
-
Yavari, A.
Morphology and Linear Viscoelastic Properties of HDPE/EVA and LDPE/EVA Blends in the Melt State [Volume 18, Issue 5, 2006, Pages 319-324]
-
Yavari, A.
Study on the Dynamic Melt Rheology of Low and High-density Polyethylene/Ethylene-vinyl Acetate Copolymer Blends [Volume 18, Issue 4, 2005, Pages 229-234]
-
Yavari, Neda
Dynamic-Mechanical Properties and Thermal
Conductivity of a Polyester Resin Containing
Modified Graphene Oxide Particles [Volume 34, Issue 3, 2021, Pages 281-297]
-
Yazdan shenas, M.E.
Bleeding Reduction of Cotton Fabrics Dyed with Bifunctional Reactive Dyes
during Laundering Using Polymeric Materials [Volume 19, Issue 1, 2006, Pages 59-66]
-
Yazdani, R.
Surveying the Influence of Reclaimed Rubber and Rubber Powder on Physical, Dynamical and Processing Properties of NR/BR Compound [Volume 21, Issue 3, 2008, Pages 217-223]
-
Yazdani, R.
Effect of Process Parameters of Mixing on Physicomechanical and Rheological Properties of Rubber Compound [Volume 21, Issue 3, 2008, Pages 225-234]
-
Yazdanpanah, Mohammadreza
Modification of Polysulfone Hollow Fiber Membrane Inner Surface with Polydopamine Coating Treatment [Volume 35, Issue 1, 2022, Pages 53-67]
-
Yazdanshenas, Mohamad-Esmail
Effect of Nanosilica Type on Properties of Polyethylene Terephthalane/Silica Nanocomposite [Volume 25, Issue 3, 2012, Pages 203-219]
-
Yazdanshenas, Mohamad Ismail
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Yazdi Aznaveh, Hani
Modification of Asphalt Pavement with Polysulfide Polymer [Volume 24, Issue 3, 2011, Pages 241-249]
-
Yegani, Reza
Fabrication of ZSM-5 Zeolite Dispersed Polyethylene Membranes via Thermally Induced Phase Separation
Method [Volume 27, Issue 5, 2014, Pages 371-359]
-
Yegani, Reza
Preparation and Characterization of HDPE/EVA Flat Sheet Membranes by Thermally Induced Phase Separation Method [Volume 28, Issue 2, 2015, Pages 159-149]
-
Yegani, Reza
The Effect of LiCl and Coagulation Bath Temperature on the Structure and Performance of PVDF Membranes [Volume 28, Issue 4, 2015, Pages 311-301]
-
Yegani, Reza
Study on the Impact of Coagulation Bath Temperature on the Surface Morphology and Performance of Polyethylene Membrane Prepared by TIPS Method in Purification of Collagen Protein [Volume 28, Issue 5, 2015, Pages 407-395]
-
Yegani, Reza
Effects of TiO2 and ZnO Nanoparticles on the Structure and Fouling Behavior of Polyethylene Membranes [Volume 28, Issue 6, 2016, Pages 493-477]
-
Yegani, Reza
Study on the Fouling Behavior of Polyethylene and Silica Nanoparticles Mixed Matrix Membranes in Filtration of Humic Acid Solution [Volume 29, Issue 4, 2016, Pages 347-363]
-
Yegani, Reza
The Effects of Bore Fluid Composition and Coagulation Bath Temperature on the Structure and Performance of Polysulfone Hollow Fiber Membranes in Collagen Separation [Volume 29, Issue 6, 2017, Pages 559-570]
-
Yegani, Reza
A PSf/Amino Acid-Modified Montmorillonite Mixed Matrix Membrane for Arsenic Removal from Water: Preparation and Evaluation of Its Properties [Volume 30, Issue 1, 2017, Pages 75-88]
-
Yegani, Reza
Evaluation of Wetting Behavior of Nanocomposite Polypropylene Hollow Fiber Membrane as a Membrane Contactor for CO2 Removal [Volume 31, Issue 4, 2018, Pages 331-344]
-
Yegani, Reza
Effect of Extractant, Take-up Speed and Bore Fluid Flow Rate on the Structure and Performance of LLDPE Hollow Fiber Membrane [Volume 32, Issue 2, 2019, Pages 157-169]
-
Yegani, Reza
Reducing the Wettability of Porous Polymeric Membranes in Membrane Contactors: An Overview on the Methods and Their Effective Parameters [Volume 35, Issue 3, 2022, Pages 181-200]
-
Yousefi, A.
The Properties of Polymer-Modified Asphalt Drived from Vacuum Bottom and Wastes of PE and SBR Plants [Volume 21, Issue 3, 2008, Pages 235-241]
-
Yousefi, A. A.
The Properties of Polymer-Modified Asphalt Drived from Vacuum Bottom and Wastes of PE and SBR Plants [Volume 21, Issue 3, 2008, Pages 235-241]
-
Yousefi, A. A.
Mechanical Properties of Non-Woven Polyester Fibers and Polymer-Modified Bitumen Composites [Volume 20, Issue 5, 2008, Pages 489-502]
-
Yousefi, A.A
Investigation on the Effect of Extensional Flow on the β-Crystalline Phase Formation in Extruded PVDF Films [Volume 19, Issue 1, 2006, Pages 43-51]
-
Yousefi, A.A.
Rotational Rheometers and Their Applications [Volume 14, Issue 2, 2001]
-
Yousefi, A.A.
Determination of Bitumen Molecular-weight Distribution via its Delta Rheological Function [Volume 16, Issue 3, 2003]
-
Yousefi, A.A.
Study of Viscoelastic Behavior of Bitumen-Polyethylene Blends [Volume 16, Issue 5, 2004]
-
Yousefi, A.A.
Morphology and Rheological, Thermal and Thermomechanical Properties of PP/PET Blends [Volume 16, Issue 6, 2004]
-
Yousefi, A.A.
Effect of Recycled Waste Polymers, Natural Bitumen and HVS Cut on the Properties of Vacuum Bottom [Volume 23, Issue 1, 2010, Pages 85-95]
-
Yousefi, A.A.
Mechanical Properties of the Blends of Recycled Polypropylene with Blown and Soft Bitumens [Volume 20, Issue 6, 2008, Pages 539-550]
-
Yousefi, A.A.
Viscoelastic Behaviour of Asphodel-Borax Gels [Volume 19, Issue 1, 2006, Pages 3-11]
-
Yousefi, ali akbar
Kinetics of Waterborne Alkyd/Acrylic Hybrid Resin Free Radical Polymerization by Two Systems of Redox and Thermal Initiators [Volume 24, Issue 2, 2011, Pages 141-152]
-
Yousefi, Ali Akbar
Temperature Dependency of Poly(vinylidene fluoride) Chain Dimension in Solution and Melt State [Volume 25, Issue 1, 2012, Pages 31-40]
-
Yousefi, Ali Akbar
Effect of Polyamide 6 on Crystalline Structure of Polymer in PVDF-Nanoclay Nanocomposite [Volume 25, Issue 1, 2012, Pages 41-51]
-
Yousefi, Ali Akbar
The Effect of SWCNT and MWCNT on Properties and Crystalline Structure of Polyvinylidene Fluoride [Volume 25, Issue 2, 2012, Pages 113-125]
-
Yousefi, Ali Akbar
Effect of Mixing Condition on Rheological Behavior of Epoxy-Clay Nanocomposites [Volume 25, Issue 3, 2012, Pages 241-250]
-
Yousefi, Ali Akbar
PMMA/CB and PMMA/MWCNTs Nanocomposites: Assessments through Optical Behavior [Volume 25, Issue 4, 2012, Pages 255-263]
-
Yousefi, Ali Akbar
Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
-
Yousefi, Ali Akbar
Nanoclay Localization Effect on Melt Rheological Behavior and Microstructure of PP/PET Blend [Volume 26, Issue 1, 2013, Pages 57-72]
-
Yousefi, Ali Akbar
Effect of Alumina Nanoparticles on the Rheological Behavior of Aluminum-Binder Mixtures for Powder Injection Molding [Volume 27, Issue 4, 2014, Pages 324-313]
-
Yousefi, Ali Akbar
Effect of Interactions Between Anionic Vesicles and a Cationic Terpolymer in Concentrated Solution Regime: Morphology and Size Changes of the Vesicular Particles [Volume 29, Issue 1, 2016, Pages 3-14]
-
Yousefi, Ali Akbar
Effect of Liquid Waste Polysulfide and Nanoclay on Engineering Properties of Bitumen [Volume 30, Issue 3, 2017, Pages 255-268]
-
Yousefi, Ali Akbar
Different Methods of Changing Piezoelectric Properties in Poly(vinylidene fluoride): A Review [Volume 32, Issue 4, 2019, Pages 283-301]
-
Yousefi, Ali Akber
An Overview on Piezoelectric Cellular Polymers: Properties and Preparation [Volume 33, Issue 1, 2020, Pages 3-24]
-
Yousefi, M.
Effect of Microwave Heating on the Fine Structure of Polyester Filaments [Volume 15, Issue 4, 2002]
-
Yousefi, Mohammad Reza
Synthesis of Polybutadiene Particles via Emulsion Polymerization: Effect of Emulsifier and Initiator
Contents on the Reaction Kinetics and Latex’s Particle Size [Volume 25, Issue 5, 2013, Pages 351-364]
-
Yousefzadeh, Maryam
Optimization of Polyurethane Scaffolds by Taguchi Design of Experiments for Vascular Tissue Engineering Applications [Volume 33, Issue 5, 2021, Pages 419-433]
-
Yousefzadeh, P.
Radiation Curing of UPEs/EP Resin System [Volume 8, Issue 2, 1995]
Z
-
Zabih poor, M.
Evaluation and Development of Bridging Micromechanics Model Using
Mechanical Properties of Composite Materials Characterization Tests [Volume 18, Issue 6, 2006, Pages 369-376]
-
Zabihi, Erfan
Fibrous Structures Fabricated from
Polylactic Acid and Nanofibrillated Chitosan/
Zinc Oxide Nanoparticles [Volume 34, Issue 2, 2021, Pages 173-190]
-
Zadhoush, A.
Effect of Coating Paste Formulation on the Mechanical Properties of Synthetic Leather [Volume 11, Issue 1, 1998]
-
Zadhoush, Ali
The Importance and Influence of Rheological Properties of Polymer Solutions in Phase Inversion Process and Morphology of Polymeric Membranes [Volume 28, Issue 5, 2015, Pages 371-351]
-
Zafar Mehrabian, Ramin
The Effect of Silica/Carbon Black Filler Systems on the Fatigue Properties of the Tread Compound in Passenger Tires [Volume 24, Issue 4, 2011, Pages 329-337]
-
Zafarani, M.T.
Application of Aqueous Polymer Systems in Biotechnology [Volume 7, Issue 4, 1994]
-
Zahed Karkaj, Sirous
Physical, Mechanical and Antibacterial Properties of Nanobiocomposite Films Bosed on Carboxymethyl Cellulose/Nanoclay [Volume 30, Issue 6, 2018, Pages 557-572]
-
Zahedi, M.
Measurement of Molecular Orientation of Polyethylene Terphthalate by Rheo-Optical FTIR-Polarized Spectroscopy of Biaxial Direction [Volume 10, Issue 1, 1997]
-
Zahedi, M.
Application of the Near Infrared Fourier Transform Polarized Spectroscopy for Determination of Polymers' Molecular Orientation [Volume 11, Issue 1, 1998]
-
Zahedi, M.
Slurry Polymerization of Propylene Using High Activity Heterogeneous Ziegler-Natta Catalyst, MgCl2[Mg(OEt)2]/TiCl4/DNBP/TEA/DMDCHS [Volume 11, Issue 4, 1998]
-
Zahiri, A.R.
Investigating the Characteristics of Polyaniline and its Composite Films Prepared by Chemical Method [Volume 18, Issue 4, 2005, Pages 203-209]
-
Zakiyan, S. Esmaeil
Effect of Shear Rate and Nanoparticles in Extrusion Foaming of Polystyrene in the Presence of Nitrogen Gas [Volume 26, Issue 6, 2014, Pages 511-499]
-
Zakiyan, S. Esmaeil
Responses of Polystyrene/MWCNT Nanocomposites to Electromagnetic Waves and the Effect of Nanotubes Dispersion [Volume 27, Issue 3, 2014, Pages 201-193]
-
Zakiyan, Seyed Esmaeil
Heterogeneous Nucleation in Batch Foaming of Polystyrene in Presence of Nanosilica as a Nucleating Agent [Volume 25, Issue 3, 2012, Pages 231-240]
-
Zakiyan, Seyed Esmaeil
The Effect of Surface Properties and Content of Nanosilica Particles on Polystyrene Foam [Volume 25, Issue 5, 2013, Pages 393-404]
-
Zakiyan, Seyyed Esmaeil
Control of Foam Structure in PolyStyrene-Nanosilica-Carbon Dioxide: Effect of Temperature and Nanoparticles [Volume 29, Issue 1, 2016, Pages 73-88]
-
Zalnezhad, Amir
Thermomechanical Properties of Poly(ethylene oxide)/Nanochitin Nanocomposite Prepared by Mechanical Method [Volume 30, Issue 3, 2017, Pages 247-254]
-
Zamani, Fatemeh
The Effect of Electrical Stimulation on Growth and Proliferation of Neural Cells Using Conductive Nanofibrous Scaffolds [Volume 31, Issue 5, 2019, Pages 427-434]
-
Zamani, Fatemeh
Estimation and Optimization of Physical Properties of Electrospun PLGA Nanofibrous Mat [Volume 35, Issue 2, 2022, Pages 127-138]
-
Zamani, Jamal
Manufacturing Method of Carbon/Phenolic Composites and its Implication on Ablative Charactristics [Volume 26, Issue 3, 2013, Pages 256-243]
-
Zamani Pedram, Mona
DEA-Impregnated Cross-Linked Polyvinyl Alcohol/Glutaraldehyde Polymeric Systems as CO2/CH4 Gas Separation Membranes [Volume 25, Issue 6, 2013, Pages 477-489]
-
Zamanloo, Mohammad Reza
Solubility and Phase Transfer of Insoluble Dyes in Organic Solvent by Polyurethane Reverse Micelle [Volume 34, Issue 5, 2022, Pages 443-455]
-
Zand, R.Zandi
Improvement of Corrosion Resistance of Organic-inorganic Hybrid Coatings Based on Epoxy-silica via Aromatic Diol Curing Agent [Volume 17, Issue 6, 2005, Pages 367-357]
-
Zandi, Mojgan
Effect of Solution Surface Tension on Morphology of PLGA and Gelatin Electrospun Fibers [Volume 25, Issue 1, 2012, Pages 3-10]
-
Zandi, Mojgan
Nanomechanical Properties of Photo-Cured Cyanoacrylate Bioadhesives Crosslinked by TMPTMA or POSS Nanostructures [Volume 25, Issue 1, 2012, Pages 53-64]
-
Zandi, Mojgan
Synthesis Methods of In Situ Forming Injectable
Hydrogels and Their Applications in Tissue
Engineering: A Review [Volume 33, Issue 2, 2020, Pages 95-113]
-
Zandi, Mojgan
Studies on Synergistic Effect of Curcumin, Piperine and Ellagic Acid on Antibacterial Properties of Biocompatible Nanofibers Based on Polycaprolactone [Volume 34, Issue 5, 2022, Pages 457-468]
-
Zanjirian, E.
Single Vacuum Bagging and Autoclave Curing System Influence on Physical and Mechanical Properties of Phenolic Composites [Volume 23, Issue 6, 2011, Pages 509-518]
-
Zare, K.
Using Different Methods to Determine Monomer Reactivity Ratios in Styrene/Acrylonitrile Copolymer [Volume 12, Issue 1, 1999]
-
Zare, Mojtaba
Computer Simulation and Experimental Study of Deformation in a Radial Tire under Different Static Loads Using Finite Element Method [Volume 27, Issue 4, 2014, Pages 336-325]
-
Zare Mehrjerdi, N.
A Simple and Efficient Method to Improve Mechanical Properties of Collagen Scaffolds by UV Irradiation [Volume 23, Issue 5, 2011, Pages 371-378]
-
Zareei, Farhad
Fabrication and Investigation of Separation
Performance and Antifouling Properties of Mixed Matrix PES-Based Nanofiltration Membrane Containing Cobalt-Ferrite Nanoparticles [Volume 33, Issue 5, 2021, Pages 385-400]
-
Zarei, Ali Akbar
An Overview on Piezoelectric Cellular Polymers: Properties and Preparation [Volume 33, Issue 1, 2020, Pages 3-24]
-
Zarei Abyaneh, M.
Agitation and Agitators [Volume 4, Issue 1, 1991]
-
Zargar, M.R.Habibollah
Study of the Photochemical Degradation of Cotton Fabric Dyed with Vat Dyed [Volume 9, Issue 3, 1996]
-
Zargaran, M.
Studies of Effect of Reaction Conditions and the Type of Reagent on the Mechanical Properties of Modified Acrylic Fibers with Adsorptivity of Ionic Compounds [Volume 19, Issue 5, 2007]
-
Zargaran, M.
Incorporating Functional Groups on the Structure of Acrylic Fibers for Adsorption of Metal Ionic Compounds [Volume 18, Issue 4, 2005, Pages 235-240]
-
Zargarian, Seyed Shahrooz
Effect of Pluronic Introduction to Polycaprolactone Substrate on the Blend Hydrophilicity by Molecular Dynamic Simulation [Volume 29, Issue 3, 2016, Pages 286-300]
-
Zargoosh, Mojtaba
Wollastonite as a Suitable Alternative to Glass Fibers in Acrylonitrile-Butadiene-Styrene Composites [Volume 32, Issue 6, 2020, Pages 509-519]
-
Zarringhalam, A.
Investigation of Polyvinyl Chloride and Nitrile Rubber Blends [Volume 10, Issue 4, 1997]
-
Zarringhalam Moghaddam, A.
Application of Thermal Analysis Methods on the Study of PE Thermal Degradation and the Influence of Mg (OH)2 as Fire Retardant [Volume 15, Issue 4, 2002]
-
Zavareh, M.Tabatabai
Synthesis, Characterization and Investigation on the Kinetics of Melamine Formaldehyde Alkylation Reaction by Methanol [Volume 11, Issue 2, 1998]
-
Zebarjad, S.M.
The Role of Multi-wall Carbon Nanotubes on Fracture Mechanism of Epoxy Nanocomposite [Volume 21, Issue 5, 2009, Pages 417-430]
-
Zebarjad, S.M.
The Effect of Temperature and Nano-sized Calcium Carbonate on Tensile Properties of Medium Density
Polyethylene [Volume 21, Issue 2, 2008, Pages 133-140]
-
Zehzad, S.
Preparation of Conductive Polyaniline/Silica Composite [Volume 9, Issue 1, 1996]
-
Zeinedin, A.
A Novel Procedure for Prediction of Mixed Mode I/II in Fracture Toughness of Laminate Composites [Volume 27, Issue 2, 2014, Pages 120-111]
-
Zeraatkar, Vahid
Preparation of New Conductive Nanocomposites of Polyaniline and Silica under Solid-State Condition [Volume 29, Issue 4, 2016, Pages 387-398]
-
Zeraatpisheh, Fatemeh
Optimization of Effective Parameters in Fabrication of PVC Flat Sheet Membranes by Response Surface Method for Application in Humic Acid Separation [Volume 36, Issue 4, 2024, Pages 421-435]
-
Zeynali, M.E.
Bitumen Modification via PS/PB Blend [Volume 16, Issue 5, 2004, Pages 303-311]
-
Zeynali, Mohammad Ebrahim
Parameters Affecting the Crystalinity of Poly (vinyl alcohol) Prepared at Different Reaction Conditions [Volume 27, Issue 4, 2014, Pages 311-299]
-
Ziaee, F.
Methods for Determination of Monomers' Reactivity Ratios in Copolymers [Volume 8, Issue 2, 1995]
-
Ziaee, F.
Microstructure Determination of Styrene/Butyl Acrylate Copolymer by 13C Nuclear Magnetic Resonance Spectroscopy [Volume 9, Issue 1, 1996]
-
Ziaee, F.
Determination of Styrene-Butyl Acrylate Copolymer Composition [Volume 9, Issue 2, 1996]
-
Ziaee, F.
Using Different Methods to Determine Monomer Reactivity Ratios in Styrene/Acrylonitrile Copolymer [Volume 12, Issue 1, 1999]
-
Ziaee, F.
Preparation and Characterization of Tetrabromobisphenol A [Volume 12, Issue 3, 1999]
-
Ziaee, F.
Microstructural Study on Polyvinyl Chloride by One and Two Dimensional Nuclear Magnetic Resonance Spectroscopy Methods [Volume 23, Issue 4, 2010, Pages 311-321]
-
Ziaee, F.
Characterization and Thermal Rearrangement Investigation of 1,4-Polybutadiene by Nuclear Magnetic Resonance Spectroscopy [Volume 22, Issue 5, 2010, Pages 389-398]
-
Ziaee, farshid
Sample Thickness and Structural Changes in Thermo-Oxidative Degradation of Polybutadiene [Volume 24, Issue 2, 2011, Pages 93-99]
-
Ziaee, Farshid
Vinyl Chloride Emulsion Polymerization Reaction: Effect of Various Formulations [Volume 24, Issue 3, 2011, Pages 205-214]
-
Ziaee, Farshid
Determination of Polybutadiene Unsaturation Content in Thermal and Thermo-Oxidative Degradation Processes by NMR [Volume 24, Issue 5, 2012, Pages 403-412]
-
Ziaee, Farshid
Microstructural Investigation and MolecularWeight Determination of 1, 2-Polybutadiene by Nuclear Magnetic Resonance Spectroscopy [Volume 23, Issue 5, 2011, Pages 359-370]
-
Ziaee, Farshid
Kinetic Investigation of Styrene Free Radical Polymerization by Using Binary Mixtures of Monofunctional Initiators [Volume 22, Issue 2, 2009, Pages 133-140]
-
Ziaee, Farshid
Online Morphology Development of Immiscible Polymer Blends in the Presence of an Interfacial Modifier [Volume 29, Issue 6, 2017, Pages 571-582]
-
Ziaee, Farshid
Determination of Monomers Reactivity Ratios in Ethyl Acrylate-Methacrylic Acid Copolymerization by Off-Line 1H NMR [Volume 30, Issue 1, 2017, Pages 31-42]
-
Ziaee, Farshid
Polymerization Parameters of Methacrylic Acid Esters as Viscosity Index Improvers in Lubricants [Volume 32, Issue 2, 2019, Pages 123-134]
-
Ziaee, Farshid
Effect of Different Polar Solvents and Stabilizer and Co-Stabilizer Concentration on Dispersion Polymerization of Styrene [Volume 32, Issue 2, 2019, Pages 171-181]
-
Ziaee, Farshid
Effect of Reaction Temperature on Tacticity in Polymerization of Methyl Methacrylate: A Study by Nuclear Magnetic Resonance Spectroscopy [Volume 35, Issue 4, 2023, Pages 393-404]
-
Ziai'ee, F.
Degradation and Stability of Cellulose Triacetate Cinematograph Films [Volume 7, Issue 1, 1994]
-
Ziaie, F.
Synthesis of Vinyl Chloride-vinyl Acetate Copolymer Through Batch Emulsion Polymerization [Volume 16, Issue 4, 2003]
-
Ziaolhagh, S.J.
An Investigation of Reactive Compatibilizer Effect on Thermal,
Thermomechanical, Rheological-morphology Properties of PTT/m-LLDPE Blends [Volume 19, Issue 2, 2006, Pages 151-161]
-
Ziari, H.
The Effect of SBS Polymer on the Dynamic Properties of Asphalt [Volume 21, Issue 6, 2009, Pages 465-470]
-
Ziari, H.
Effect of Polymer on Bitumen Properties and its Performance Grade [Volume 21, Issue 3, 2008, Pages 201-208]
-
Zibaseresht, Ramin
Fabrication of Electrospun Fibers Containing Ternary Eutectic Fatty Acid Mixture as Phase-Change Materials for Application in Textiles [Volume 32, Issue 2, 2019, Pages 135-143]
-
Zisler, H.Vilhelm
Investigation of Polymer Optical Fibers Properties and Determination of their Optimum Transmission Waveguid Rang and Comparision with Glass Optical Fibers [Volume 17, Issue 2, 2004]
-
Ziyaei, Hogatallah
Poly(lactic acid)/Polycaprolactone/Graphene Bionanocomposites: Microstructural, Mechanical and Thermal Properties [Volume 35, Issue 5, 2023, Pages 469-486]
-
Zoghi, Sepideh
Elastomer Nanocomposites Based on Butadiene Rubber, Nanoclay and Epoxy-Polyester Hybrid: Microstructure and Mechanical Properties [Volume 26, Issue 3, 2013, Pages 242-233]
-
Zohouri, G.
Slurry Polymerization of Propylene Using High Activity Heterogeneous Ziegler-Natta Catalyst, MgCl2[Mg(OEt)2]/TiCl4/DNBP/TEA/DMDCHS [Volume 11, Issue 4, 1998]
-
Zohouri, G.H.
Study of Variation in Chemical Composition of EPDM Elastomers Synthesized with Ziegler-Natta Catalyst Based on Vanadium During Terpolymerization [Volume 16, Issue 5, 2004]
-
Zohouri, GH.
Study on Ethylene Polymerization by Active Ziegler?Natta Catalyst Based TiCl4 Supported on Mg(OEt)2 [Volume 10, Issue 3, 1997]
-
Zohreh, Nasrin
Hydrolysis of Cellulose by Magnetic Poly(ionic liquid) Nanocatalyst Based on Poly(vinylimidazolium sulfonic acid) [Volume 31, Issue 4, 2018, Pages 307-318]
-
Zohuri, G.
Preparation of Silicious Mesoporous Spherical and Rod- Like MCM-41 Using Cetyltrimethylammonium Bromide
as the Structure Directing Agent [Volume 21, Issue 3, 2008, Pages 243-250]
-
Zohuri, G.H.
Study of the Effect of Different Alkylaluminiums on Slurry Polymerization of 4-Methyl-1-Pentene Using d-TiCl3, 0.33 AlCl3 Heterogeneous Ziegler-Natta Catalyst [Volume 12, Issue 2, 1999]
-
Zohuri, G.H.
Synthesis of (Ind)2ZrCl2 Catalyst for Copolymerization of Ethylene and Propylene:
Parameters Effect on Productivity [Volume 23, Issue 5, 2011, Pages 379-386]
-
Zohuri, Gholamhossein
Polymerization of Ethylene Using α-Diimine Nickel Catalyst [Volume 26, Issue 4, 2013, Pages 335-327]
-
Zohuri, Gholamhossein
Synthesis of Metallocene Catalyst for Terpolymerization of Ethylene, Propylene and Diene [Volume 27, Issue 1, 2014, Pages 35-25]
-
Zohuriaan-Mehr, M.J.
Crosslinkers of Different Types in Precipitation Polymerization of Acrylic Acid [Volume 23, Issue 1, 2010, Pages 75-84]
-
Zohuriaan-Mehr, M.J.
An Alcogel Based on Poly(2-acrylamido-2-methylpropane sulphonic acid) and the Effect of Neutralization Degree on its Swelling, Thermal and Mechanical Properties [Volume 23, Issue 2, 2010, Pages 145-153]
-
Zohuriaan-Mehr, Mohamad Jalaledin
Synthesis of Aluminum Triacrylate as Reactive Filler in EPDM Reinforcement [Volume 24, Issue 3, 2011, Pages 195-204]
-
Zohuriaan-Mehr, Mohamad Jalaledin
Flame Retardant Compounds for Epoxy Resins: A Review [Volume 34, Issue 1, 2021, Pages 3-27]
-
Zohuriaan-Mehr, Mohammad Jalal
A Novel Ultra-High Swelling Organogel: An Epoxy Resin Derived Gelator for Alcohols and Polar Organic Liquids [Volume 33, Issue 4, 2020, Pages 315-328]
-
Zohuriaan-Mehr, Mohammad Jalal
Biobased Acids in Production of Hybrid Superabsorbent Polymer Hydrogels: A Review [Volume 34, Issue 3, 2021, Pages 207-231]
-
Zohuriaan-Mehr, Mohammad jalaledin
Long-Chain Diacrylate Crosslinkers and Use of PEG Crosslinks in Poly(potassium acrylate-acrylic acid)/Kaolin Composite Superabsorbents [Volume 22, Issue 2, 2009, Pages 107-116]
-
Zojajian, Afshin
Fabrication of Aligned Nanofibers by Manipulated Rotating Drum Method and Studying the Effective Parameters on Fibers Alignment by Image Processing [Volume 25, Issue 5, 2013, Pages 339-350]
-
Zokaee Ashtiani, Farzin
The Influence of Fibers Diameter on Water Vapor
Permeability, Waterproof and Windproof Properties of Electrospun Poly(vinylidene fluoride) Membrane [Volume 32, Issue 6, 2020, Pages 485-495]
-
Zolnoorian, M.
Biodegradation of Polyurethanes by Fungi [Volume 6, Issue 4, 1993]
Your query does not match with any item